Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A few more ARM fixes:

   - the assembly backtrace code suffers problems with the new printk()
     implementation which assumes that kernel messages without KERN_CONT
     should have newlines inserted between them. Fix this.
   - fix a section naming error - ".init.text" rather than ".text.init"
   - preallocate DMA debug memory at core_initcall() time rather than
     fs_initcall(), as we have some core drivers that need to use DMA
     mapping - and that triggers a kernel warning from the DMA debug
     code.
   - fix XIP kernels after the ro_after_init changes made this data
     permanently read-only"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: Fix XIP kernels
  ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
  ARM: 8624/1: proc-v7m.S: fix init section name
  ARM: fix backtrace

arch/arm/kernel/traps.c

@@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
+void dump_backtrace_stm(u32 *stack, u32 instruction)
+{
+	char str[80], *p;
+	unsigned int x;
+	int reg;
+
+	for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
+		if (instruction & BIT(reg)) {
+			p += sprintf(p, " r%d:%08x", reg, *stack--);
+			if (++x == 6) {
+				x = 0;
+				p = str;
+				printk("%s\n", str);
+			}
+		}
+	}
+	if (p != str)
+		printk("%s\n", str);
+}
+
 #ifndef CONFIG_ARM_UNWIND
 /*
  * Stack pointers should always be within the kernels view of

arch/arm/kernel/vmlinux-xip.lds.S

@@ -3,6 +3,9 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
  */
 
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
@@ -223,6 +226,8 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 
+		*(.data..ro_after_init)
+
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)

arch/arm/lib/backtrace.S

@@ -10,6 +10,7 @@
  * 27/03/03 Ian Molton Clean up CONFIG_CPU
  *
  */
+#include <linux/kern_levels.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text
@@ -83,13 +84,13 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
 		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 		teq	sv_fp, #0		@ zero saved fp means
 		beq	no_frame		@ no further frames
@@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
 		.long	1004b, 1006b
 		.popsection
 
-#define instr r4
-#define reg   r5
-#define stack r6
-
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #10
-		mov	r7, #0
-1:		mov	r3, #1
- ARM(		tst	instr, r3, lsl reg	)
- THUMB(		lsl	r3, reg			)
- THUMB(		tst	instr, r3		)
-		beq	2f
-		add	r7, r7, #1
-		teq	r7, #6
-		moveq	r7, #0
-		adr	r3, .Lcr
-		addne	r3, r3, #1		@ skip newline
-		ldr	r2, [stack], #-4
-		mov	r1, reg
-		adr	r0, .Lfp
-		bl	printk
-2:		subs	reg, reg, #1
-		bpl	1b
-		teq	r7, #0
-		adrne	r0, .Lcr
-		blne	printk
-		ldmfd	sp!, {instr, reg, stack, r7, pc}
-
-.Lfp:		.asciz	" r%d:%08x%s"
-.Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}

arch/arm/mm/dma-mapping.c

@@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void)
 	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
 	return 0;
 }
-fs_initcall(dma_debug_do_init);
+core_initcall(dma_debug_do_init);
 
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 

arch/arm/mm/proc-v7m.S

@@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin)
 	ret	lr
 ENDPROC(cpu_cm7_proc_fin)
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".init.text", #alloc, #execinstr
 
 __v7m_cm7_setup:
 	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)