AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[PATCH] md: fix --re-add for raid1 and raid6

Browse Source 
If you have an array with a write-intent-bitmap, and you remove a device, then
re-add it, a full recovery isn't needed.  We detect a re-add by looking at
saved_raid_disk.  For raid1, it doesn't matter which disk it was, only whether
or not it was an active device.  The old code being removed set a value of
'mirror' which was then ignored, so it can go.  The changed code performs the
correct check.

For raid6, if there are two missing devices, make sure we chose the right slot
on --re-add rather than always the first slot.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
NeilBrown 2005-11-28 13:44:13 -08:00 committed by Linus Torvalds
parent b2a2703c28
commit 6aea114a72
2 changed files with 12 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/md/raid1.c
View File

@ -953,9 +953,6 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
int mirror = 0;
mirror_info_t *p;
if (rdev->saved_raid_disk >= 0 &&
conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
mirror = rdev->saved_raid_disk;
for (mirror=0; mirror < mddev->raid_disks; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
@ -972,7 +969,10 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
p->head_position = 0;
rdev->raid_disk = mirror;
found = 1;
if (rdev->saved_raid_disk != mirror)
/* As all devices are equivalent, we don't need a full recovery
* if this was recently any drive of the array
*/
if (rdev->saved_raid_disk < 0)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
break;

10
drivers/md/raid6main.c
View File

@ -2158,9 +2158,15 @@ static int raid6_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
/* no point adding a device */
return 0;
/*
* find the disk ...
* find the disk ... but prefer rdev->saved_raid_disk
* if possible.
*/
for (disk=0; disk < mddev->raid_disks; disk++)
if (rdev->saved_raid_disk >= 0 &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
disk = rdev->saved_raid_disk;
else
disk = 0;
for ( ; disk < mddev->raid_disks; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;