forked from luck/tmp_suning_uos_patched
clk: move IM-PD1 clocks to drivers/clk
The ARM IM-PD1 add-on module has a few clock of its own, let's move also these down to the drivers/clk/versatile driver dir and get rid of any remaining oldschool Integrator clocks. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
This commit is contained in:
parent
7a9ad671ac
commit
70ee657714
|
@ -21,10 +21,9 @@
|
|||
#include <linux/amba/bus.h>
|
||||
#include <linux/amba/clcd.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/platform_data/clk-integrator.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/clkdev.h>
|
||||
|
||||
#include <asm/hardware/icst.h>
|
||||
#include <mach/lm.h>
|
||||
#include <mach/impd1.h>
|
||||
#include <asm/sizes.h>
|
||||
|
@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
|
|||
|
||||
struct impd1_module {
|
||||
void __iomem *base;
|
||||
struct clk vcos[2];
|
||||
struct clk_lookup *clks[3];
|
||||
};
|
||||
|
||||
static const struct icst_params impd1_vco_params = {
|
||||
.ref = 24000000, /* 24 MHz */
|
||||
.vco_max = ICST525_VCO_MAX_3V,
|
||||
.vco_min = ICST525_VCO_MIN,
|
||||
.vd_min = 12,
|
||||
.vd_max = 519,
|
||||
.rd_min = 3,
|
||||
.rd_max = 120,
|
||||
.s2div = icst525_s2div,
|
||||
.idx2s = icst525_idx2s,
|
||||
};
|
||||
|
||||
static void impd1_setvco(struct clk *clk, struct icst_vco vco)
|
||||
{
|
||||
struct impd1_module *impd1 = clk->data;
|
||||
u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
|
||||
|
||||
writel(0xa05f, impd1->base + IMPD1_LOCK);
|
||||
writel(val, clk->vcoreg);
|
||||
writel(0, impd1->base + IMPD1_LOCK);
|
||||
|
||||
#ifdef DEBUG
|
||||
vco.v = val & 0x1ff;
|
||||
vco.r = (val >> 9) & 0x7f;
|
||||
vco.s = (val >> 16) & 7;
|
||||
|
||||
pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
|
||||
vconr, icst525_hz(&impd1_vco_params, vco));
|
||||
#endif
|
||||
}
|
||||
|
||||
static const struct clk_ops impd1_clk_ops = {
|
||||
.round = icst_clk_round,
|
||||
.set = icst_clk_set,
|
||||
.setvco = impd1_setvco,
|
||||
};
|
||||
|
||||
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
|
||||
|
@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = {
|
|||
}
|
||||
};
|
||||
|
||||
static struct clk fixed_14745600 = {
|
||||
.rate = 14745600,
|
||||
};
|
||||
|
||||
static int impd1_probe(struct lm_device *dev)
|
||||
{
|
||||
struct impd1_module *impd1;
|
||||
|
@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev)
|
|||
printk("IM-PD1 found at 0x%08lx\n",
|
||||
(unsigned long)dev->resource.start);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
|
||||
impd1->vcos[i].ops = &impd1_clk_ops,
|
||||
impd1->vcos[i].owner = THIS_MODULE,
|
||||
impd1->vcos[i].params = &impd1_vco_params,
|
||||
impd1->vcos[i].data = impd1;
|
||||
}
|
||||
impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
|
||||
impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
|
||||
|
||||
impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
|
||||
dev->id);
|
||||
impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
|
||||
dev->id);
|
||||
impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
|
||||
dev->id);
|
||||
for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
|
||||
clkdev_add(impd1->clks[i]);
|
||||
integrator_impd1_clk_init(impd1->base, dev->id);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
|
||||
struct impd1_device *idev = impd1_devs + i;
|
||||
|
@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data)
|
|||
static void impd1_remove(struct lm_device *dev)
|
||||
{
|
||||
struct impd1_module *impd1 = lm_get_drvdata(dev);
|
||||
int i;
|
||||
|
||||
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
|
||||
clkdev_drop(impd1->clks[i]);
|
||||
integrator_impd1_clk_exit(dev->id);
|
||||
|
||||
lm_set_drvdata(dev, NULL);
|
||||
|
||||
|
|
|
@ -1,6 +1,7 @@
|
|||
# Makefile for Versatile-specific clocks
|
||||
obj-$(CONFIG_ICST) += clk-icst.o
|
||||
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
|
||||
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
|
||||
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
|
||||
obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o
|
||||
obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o
|
||||
|
|
97
drivers/clk/versatile/clk-impd1.c
Normal file
97
drivers/clk/versatile/clk-impd1.c
Normal file
|
@ -0,0 +1,97 @@
|
|||
/*
|
||||
* Clock driver for the ARM Integrator/IM-PD1 board
|
||||
* Copyright (C) 2012 Linus Walleij
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/clkdev.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/platform_data/clk-integrator.h>
|
||||
|
||||
#include <mach/impd1.h>
|
||||
|
||||
#include "clk-icst.h"
|
||||
|
||||
struct impd1_clk {
|
||||
struct clk *vcoclk;
|
||||
struct clk *uartclk;
|
||||
struct clk_lookup *clks[3];
|
||||
};
|
||||
|
||||
static struct impd1_clk impd1_clks[4];
|
||||
|
||||
/*
|
||||
* There are two VCO's on the IM-PD1 but only one is used by the
|
||||
* kernel, that is why we are only implementing the control of
|
||||
* IMPD1_OSC1 here.
|
||||
*/
|
||||
|
||||
static const struct icst_params impd1_vco_params = {
|
||||
.ref = 24000000, /* 24 MHz */
|
||||
.vco_max = ICST525_VCO_MAX_3V,
|
||||
.vco_min = ICST525_VCO_MIN,
|
||||
.vd_min = 12,
|
||||
.vd_max = 519,
|
||||
.rd_min = 3,
|
||||
.rd_max = 120,
|
||||
.s2div = icst525_s2div,
|
||||
.idx2s = icst525_idx2s,
|
||||
};
|
||||
|
||||
static const struct clk_icst_desc impd1_icst1_desc = {
|
||||
.params = &impd1_vco_params,
|
||||
.vco_offset = IMPD1_OSC1,
|
||||
.lock_offset = IMPD1_LOCK,
|
||||
};
|
||||
|
||||
/**
|
||||
* integrator_impd1_clk_init() - set up the integrator clock tree
|
||||
* @base: base address of the logic module (LM)
|
||||
* @id: the ID of this LM
|
||||
*/
|
||||
void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
|
||||
{
|
||||
struct impd1_clk *imc;
|
||||
struct clk *clk;
|
||||
int i;
|
||||
|
||||
if (id > 3) {
|
||||
pr_crit("no more than 4 LMs can be attached\n");
|
||||
return;
|
||||
}
|
||||
imc = &impd1_clks[id];
|
||||
|
||||
clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
|
||||
imc->vcoclk = clk;
|
||||
imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
|
||||
|
||||
/* UART reference clock */
|
||||
clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
|
||||
14745600);
|
||||
imc->uartclk = clk;
|
||||
imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
|
||||
imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
|
||||
clkdev_add(imc->clks[i]);
|
||||
}
|
||||
|
||||
void integrator_impd1_clk_exit(unsigned int id)
|
||||
{
|
||||
int i;
|
||||
struct impd1_clk *imc;
|
||||
|
||||
if (id > 3)
|
||||
return;
|
||||
imc = &impd1_clks[id];
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
|
||||
clkdev_drop(imc->clks[i]);
|
||||
clk_unregister(imc->uartclk);
|
||||
clk_unregister(imc->vcoclk);
|
||||
}
|
|
@ -1 +1,3 @@
|
|||
void integrator_clk_init(bool is_cp);
|
||||
void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
|
||||
void integrator_impd1_clk_exit(unsigned int id);
|
||||
|
|
Loading…
Reference in New Issue
Block a user