diff --git a/drivers/net/wireless/b43/bus.c b/drivers/net/wireless/b43/bus.c index 8d0e7584eafd..f897b7054a0a 100644 --- a/drivers/net/wireless/b43/bus.c +++ b/drivers/net/wireless/b43/bus.c @@ -74,6 +74,10 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev) dev->dma_dev = sdev->dma_dev; dev->irq = sdev->irq; + dev->board_vendor = sdev->bus->boardinfo.vendor; + dev->board_type = sdev->bus->boardinfo.type; + dev->board_rev = sdev->bus->boardinfo.rev; + dev->chip_id = sdev->bus->chip_id; dev->chip_rev = sdev->bus->chip_rev; dev->chip_pkg = sdev->bus->chip_package; diff --git a/drivers/net/wireless/b43/bus.h b/drivers/net/wireless/b43/bus.h index 14942fb605d9..e88b4494beaa 100644 --- a/drivers/net/wireless/b43/bus.h +++ b/drivers/net/wireless/b43/bus.h @@ -24,6 +24,10 @@ struct b43_bus_dev { struct device *dma_dev; unsigned int irq; + u16 board_vendor; + u16 board_type; + u16 board_rev; + u16 chip_id; u8 chip_rev; u8 chip_pkg; diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 70bcf4276146..b56ed41fc1bd 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -215,7 +215,6 @@ static void b43_led_get_sprominfo(struct b43_wldev *dev, enum b43_led_behaviour *behaviour, bool *activelow) { - struct ssb_bus *bus = dev->sdev->bus; u8 sprom[4]; sprom[0] = dev->dev->bus_sprom->gpio0; @@ -231,12 +230,12 @@ static void b43_led_get_sprominfo(struct b43_wldev *dev, case 0: *behaviour = B43_LED_ACTIVITY; *activelow = 1; - if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ) + if (dev->dev->board_vendor == PCI_VENDOR_ID_COMPAQ) *behaviour = B43_LED_RADIO_ALL; break; case 1: *behaviour = B43_LED_RADIO_B; - if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK) + if (dev->dev->board_vendor == PCI_VENDOR_ID_ASUSTEK) *behaviour = B43_LED_ASSOC; break; case 2: diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c index 821b516fe9e4..73ace5552bad 100644 --- a/drivers/net/wireless/b43/phy_a.c +++ b/drivers/net/wireless/b43/phy_a.c @@ -265,7 +265,6 @@ static void hardware_pctl_init_aphy(struct b43_wldev *dev) void b43_phy_inita(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy *phy = &dev->phy; /* This lowlevel A-PHY init is also called from G-PHY init. @@ -296,9 +295,9 @@ void b43_phy_inita(struct b43_wldev *dev) b43_radio_init2060(dev); - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - ((bus->boardinfo.type == SSB_BOARD_BU4306) || - (bus->boardinfo.type == SSB_BOARD_BU4309))) { + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + ((dev->dev->board_type == SSB_BOARD_BU4306) || + (dev->dev->board_type == SSB_BOARD_BU4309))) { ; //TODO: A PHY LO } diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index 3f7bdf845446..425af28ea4e5 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -368,8 +368,8 @@ void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) /* The next check will be needed in two seconds, or later. */ phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); - if ((dev->sdev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (dev->sdev->bus->boardinfo.type == SSB_BOARD_BU4306)) + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type == SSB_BOARD_BU4306)) return; /* No software txpower adjustment needed */ result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c index 40ce9e6d104e..684be1fd59ae 100644 --- a/drivers/net/wireless/b43/phy_g.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -1491,7 +1491,6 @@ static u16 b43_radio_init2050(struct b43_wldev *dev) static void b43_phy_initb5(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; u16 offset, value; @@ -1500,8 +1499,8 @@ static void b43_phy_initb5(struct b43_wldev *dev) if (phy->analog == 1) { b43_radio_set(dev, 0x007A, 0x0050); } - if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type != SSB_BOARD_BU4306)) { + if ((dev->dev->board_vendor != SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type != SSB_BOARD_BU4306)) { value = 0x2120; for (offset = 0x00A8; offset < 0x00C7; offset++) { b43_phy_write(dev, offset, value); @@ -1922,7 +1921,6 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) /* Initialize B/G PHY power control */ static void b43_phy_init_pctl(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; struct b43_rfatt old_rfatt; @@ -1931,8 +1929,8 @@ static void b43_phy_init_pctl(struct b43_wldev *dev) B43_WARN_ON(phy->type != B43_PHYTYPE_G); - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type == SSB_BOARD_BU4306)) return; b43_phy_write(dev, 0x0028, 0x8018); @@ -2136,17 +2134,17 @@ static void default_baseband_attenuation(struct b43_wldev *dev, static void default_radio_attenuation(struct b43_wldev *dev, struct b43_rfatt *rf) { - struct ssb_bus *bus = dev->sdev->bus; + struct b43_bus_dev *bdev = dev->dev; struct b43_phy *phy = &dev->phy; rf->with_padmix = 0; - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BCM4309G) { - if (bus->boardinfo.rev < 0x43) { + if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM && + dev->dev->board_type == SSB_BOARD_BCM4309G) { + if (dev->dev->board_rev < 0x43) { rf->att = 2; return; - } else if (bus->boardinfo.rev < 0x51) { + } else if (dev->dev->board_rev < 0x51) { rf->att = 3; return; } @@ -2172,21 +2170,21 @@ static void default_radio_attenuation(struct b43_wldev *dev, return; case 1: if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) + if (bdev->board_vendor == SSB_BOARDVENDOR_BCM + && bdev->board_type == SSB_BOARD_BCM4309G + && bdev->board_rev >= 30) rf->att = 3; - else if (bus->boardinfo.vendor == + else if (bdev->board_vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == + && bdev->board_type == SSB_BOARD_BU4306) rf->att = 3; else rf->att = 1; } else { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) + if (bdev->board_vendor == SSB_BOARDVENDOR_BCM + && bdev->board_type == SSB_BOARD_BCM4309G + && bdev->board_rev >= 30) rf->att = 7; else rf->att = 6; @@ -2194,16 +2192,16 @@ static void default_radio_attenuation(struct b43_wldev *dev, return; case 2: if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) + if (bdev->board_vendor == SSB_BOARDVENDOR_BCM + && bdev->board_type == SSB_BOARD_BCM4309G + && bdev->board_rev >= 30) rf->att = 3; - else if (bus->boardinfo.vendor == + else if (bdev->board_vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == + && bdev->board_type == SSB_BOARD_BU4306) rf->att = 5; - else if (dev->dev->chip_id == 0x4320) + else if (bdev->chip_id == 0x4320) rf->att = 4; else rf->att = 3; diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index bb78be319bd3..2606c25e574f 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -287,7 +287,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00); } else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ || - (bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) && + (dev->dev->board_type == 0x048A) || ((dev->phy.rev == 0) && (sprom->boardflags_lo & B43_BFL_FEM))) { b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400); @@ -413,7 +413,6 @@ static void lpphy_restore_dig_flt_state(struct b43_wldev *dev) static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy_lp *lpphy = dev->phy.lp; b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50); @@ -433,7 +432,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000); b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000); b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1); - if (bus->boardinfo.rev >= 0x18) { + if (dev->dev->board_rev >= 0x18) { b43_lptab_write(dev, B43_LPTAB32(17, 65), 0xEC); b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x14); } else { diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 46428ad5ab84..ad14f3b428c5 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -424,15 +424,14 @@ static void b43_radio_init2055_post(struct b43_wldev *dev) { struct b43_phy_n *nphy = dev->phy.n; struct ssb_sprom *sprom = dev->dev->bus_sprom; - struct ssb_boardinfo *binfo = &(dev->sdev->bus->boardinfo); int i; u16 val; bool workaround = false; if (sprom->revision < 4) - workaround = (binfo->vendor != PCI_VENDOR_ID_BROADCOM && - binfo->type == 0x46D && - binfo->rev >= 0x41); + workaround = (dev->dev->board_vendor != PCI_VENDOR_ID_BROADCOM + && dev->dev->board_type == 0x46D + && dev->dev->board_rev >= 0x41); else workaround = !(sprom->boardflags2_lo & B43_BFL2_RXBB_INT_REG_DIS); @@ -1373,7 +1372,6 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev) /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Workarounds */ static void b43_nphy_workarounds(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; struct b43_phy_n *nphy = phy->n; @@ -1505,7 +1503,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev) b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301); if (sprom->boardflags2_lo & 0x100 && - bus->boardinfo.type == 0x8B) { + dev->dev->board_type == 0x8B) { delays1[0] = 0x1; delays1[5] = 0x14; } @@ -3587,7 +3585,6 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask) */ int b43_phy_initn(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; struct b43_phy_n *nphy = phy->n; @@ -3642,8 +3639,8 @@ int b43_phy_initn(struct b43_wldev *dev) b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20); if (sprom->boardflags2_lo & 0x100 || - (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && - bus->boardinfo.type == 0x8B)) + (dev->dev->board_vendor == PCI_VENDOR_ID_APPLE && + dev->dev->board_type == 0x8B)) b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0); else b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8); diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c index 2829ee1872c9..5d00d0eaf2e7 100644 --- a/drivers/net/wireless/b43/wa.c +++ b/drivers/net/wireless/b43/wa.c @@ -458,17 +458,15 @@ static void b43_wa_rssi_adc(struct b43_wldev *dev) static void b43_wa_boards_a(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; - - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BU4306 && - bus->boardinfo.rev < 0x30) { + if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM && + dev->dev->board_type == SSB_BOARD_BU4306 && + dev->dev->board_rev < 0x30) { b43_phy_write(dev, 0x0010, 0xE000); b43_phy_write(dev, 0x0013, 0x0140); b43_phy_write(dev, 0x0014, 0x0280); } else { - if (bus->boardinfo.type == SSB_BOARD_MP4318 && - bus->boardinfo.rev < 0x20) { + if (dev->dev->board_type == SSB_BOARD_MP4318 && + dev->dev->board_rev < 0x20) { b43_phy_write(dev, 0x0013, 0x0210); b43_phy_write(dev, 0x0014, 0x0840); } else { @@ -486,13 +484,12 @@ static void b43_wa_boards_a(struct b43_wldev *dev) static void b43_wa_boards_g(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; - if (bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM || - bus->boardinfo.type != SSB_BOARD_BU4306 || - bus->boardinfo.rev != 0x17) { + if (dev->dev->board_vendor != SSB_BOARDVENDOR_BCM || + dev->dev->board_type != SSB_BOARD_BU4306 || + dev->dev->board_rev != 0x17) { if (phy->rev < 2) { b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX_R1, 1, 0x0002); b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX_R1, 2, 0x0001);