ARM: SoC fixes for 3.14-rc

A collection of fixes for ARM platforms. A little large due to us missing to
 do one last week, but there's nothing in particular here that is in itself
 large and scary.
 
 Mostly a handful of smaller fixes all over the place. The majority is made
 up of fixes for OMAP, but there are a few for others as well. In particular,
 there was a decision to rename a binding for the Broadcom pinctrl block that
 we need to go in before the final release since we then treat it as ABI.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTHKFOAAoJEIwa5zzehBx36EoP/0K7ts9qrShYUD2ASy9HuFKj
 cUcIHF+c0203bavIZzP5EQW/m7TGSybjO8UwkOaLv5SL6E9fn8rR01mmKpONeZbN
 E40ANvOxP3FdWWUFzZSh4oyaX0abaPUtPaYBavakHQI2Ej2m4UmpXAWUkCUGt9Om
 sXSAYuOi6tmpy40aimpaI1QBtx/eyxxJgEBKcbFBvhp1P3d56LTtoqmzACxBFU/8
 4NJIXuZlXTmXV9qIX+y4yXDhmVb6c/gEbNeLJ2F3yWzEeTgnMeycDb8o27Jl6Ii4
 rjsT25qplW5zvUODuhU6QUjuipPh8+WtyF8ruKMakxMNkVoGAC2flWw2TBR09tVj
 zIqYP7/vDhCEYcw4g/BqR8tEvojWt2m7Hm5y+oQY3qmCtLewL6TYeXZcXWFLCwSk
 m4zSvzZOsRsZWsZcflJKZr3g5vsjbg3vtoc3pOZaN4UcqEhU1HCtMfN3znnXIhtj
 xGWqN22S3OpGM0lzLY95lnVeLdrs6eX/ZY23BG1OV4OcDWM4nYwAxEq94QgPvSxR
 9E/fFhU2DZIulEA5Z+/PIReUCLuNL709zqnyAG9VTvbeC24sdr0W6bEM08O85xan
 kb7sbYRnt4qr4uOhPCi7wIENY4rrS91dcE3XZUhJtLWi/0jj+pHT9VoggyS4QdtS
 aWRhg70S5M6quMEoIOzg
 =YBim
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from from Olof Johansson:
 "A collection of fixes for ARM platforms.  A little large due to us
  missing to do one last week, but there's nothing in particular here
  that is in itself large and scary.

  Mostly a handful of smaller fixes all over the place.  The majority is
  made up of fixes for OMAP, but there are a few for others as well.  In
  particular, there was a decision to rename a binding for the Broadcom
  pinctrl block that we need to go in before the final release since we
  then treat it as ABI"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting
  ARM: tegra: add LED options back into tegra_defconfig
  ARM: dts: omap3-igep: fix boot fail due wrong compatible match
  ARM: OMAP3: Fix pinctrl interrupts for core2
  pinctrl: Rename Broadcom Capri pinctrl binding
  pinctrl: refer to updated dt binding string.
  Update dtsi with new pinctrl compatible string
  ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP
  ARM: OMAP2+: Add support for thumb mode on DT booted N900
  ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  ARM: DRA7: hwmod data: correct the sysc data for spinlock
  ARM: OMAP5: PRM: Fix reboot handling
  ARM: sunxi: dt: Change the touchscreen compatibles
  ARM: sun7i: dt: Fix interrupt trigger types

Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
 
 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
 
 Required Properties:
 
-- compatible:	Must be "brcm,capri-pinctrl".
+- compatible:	Must be "brcm,bcm11351-pinctrl"
 - reg:		Base address of the PAD Controller register block and the size
 		of the block.
 
 For example, the following is the bare minimum node:
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
 Example:
 // pin controller node
 pinctrl@35004800 {
-	compatible = "brcm,capri-pinctrl";
+	compatible = "brcmbcm11351-pinctrl";
 	reg = <0x35004800 0x430>;
 
 	// pin configuration node

arch/arm/boot/dts/bcm11351.dtsi

@@ -147,7 +147,7 @@ sdio4: sdio@3f1b0000 {
 	};
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 

arch/arm/boot/dts/omap3-gta04.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3";
+	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-igep0020.dts

@@ -14,7 +14,7 @@
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/omap3-igep0030.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -426,7 +426,7 @@ sid: eeprom@01c23800 {
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -383,7 +383,7 @@ sid: eeprom@01c23800 {
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -346,7 +346,7 @@ sid: eeprom@01c23800 {
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -454,7 +454,7 @@ wdt: watchdog@01c20c90 {
 		rtc: rtc@01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 1>;
+			interrupts = <0 24 4>;
 		};
 
 		sid: eeprom@01c23800 {
@@ -463,7 +463,7 @@ sid: eeprom@01c23800 {
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <0 29 4>;
 		};
@@ -596,10 +596,10 @@ i2c4: i2c@01c2bc00 {
 		hstimer@01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 1>,
-				     <0 82 1>,
-				     <0 83 1>,
-				     <0 84 1>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
 			clocks = <&ahb_gates 28>;
 		};
 

arch/arm/configs/tegra_defconfig

@@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
 	.enable		= &omap2_dflt_clk_enable,
 	.disable	= &omap2_dflt_clk_disable,
 	.is_enabled	= &omap2_dflt_clk_is_enabled,
+	.set_rate	= &omap3_clkoutx2_set_rate,
 	.recalc_rate	= &omap3_clkoutx2_recalc,
+	.round_rate	= &omap3_clkoutx2_round_rate,
 };
 
 static const struct clk_ops dpll4_m5x2_ck_3630_ops = {

arch/arm/mach-omap2/cpuidle44xx.c

@@ -23,6 +23,8 @@
 #include "prm.h"
 #include "clockdomain.h"
 
+#define MAX_CPUS	2
+
 /* Machine specific information */
 struct idle_statedata {
 	u32 cpu_state;
@@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = {
 	},
 };
 
-static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
-static struct clockdomain *cpu_clkdm[NR_CPUS];
+static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
+static struct clockdomain *cpu_clkdm[MAX_CPUS];
 
 static atomic_t abort_barrier;
-static bool cpu_done[NR_CPUS];
+static bool cpu_done[MAX_CPUS];
 static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */

arch/arm/mach-omap2/dpll3xxx.c

@@ -623,25 +623,12 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 
 /* Clock control for DPLL outputs */
 
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate)
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
 {
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
 	struct clk_hw_omap *pclk = NULL;
 	struct clk *parent;
 
-	if (!parent_rate)
-		return 0;
-
 	/* Walk up the parents of clk, looking for a DPLL */
 	do {
 		do {
@@ -656,9 +643,35 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	/* clk does not have a DPLL as a parent?  error in the clock data */
 	if (!pclk) {
 		WARN_ON(1);
-		return 0;
+		return NULL;
 	}
 
+	return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!parent_rate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
 	dd = pclk->dpll_data;
 
 	WARN_ON(!dd->enable_mask);
@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	return rate;
 }
 
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!*prate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	/* TYPE J does not have a clkoutx2 */
+	if (dd->flags & DPLL_J_TYPE) {
+		*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+		return *prate;
+	}
+
+	WARN_ON(!dd->enable_mask);
+
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* If in bypass, the rate is fixed to the bypass rate*/
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		return *prate;
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / 2);
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return *prate * 2;
+}
+
 /* OMAP3/4 non-CORE DPLL clkops */
 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
 	.allow_idle	= omap3_dpll_allow_idle,

arch/arm/mach-omap2/omap_hwmod.c

@@ -1947,29 +1947,31 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 
 	_write_sysconfig(v, oh);
+
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
+	c = _wait_softreset_complete(oh);
+	if (c == MAX_MODULE_SOFTRESET_WAIT) {
+		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		ret = -ETIMEDOUT;
+		goto dis_opt_clks;
+	} else {
+		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+	}
+
 	ret = _clear_softreset(oh, &v);
 	if (ret)
 		goto dis_opt_clks;
 
 	_write_sysconfig(v, oh);
 
-	if (oh->class->sysc->srst_udelay)
-		udelay(oh->class->sysc->srst_udelay);
-
-	c = _wait_softreset_complete(oh);
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
-			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
-		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
-
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
 dis_opt_clks:
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_disable_optional_clocks(oh);

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 

arch/arm/mach-omap2/pdata-quirks.c

@@ -22,6 +22,8 @@
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
+#include "omap-secure.h"
+#include "soc.h"
 
 struct pdata_init {
 	const char *compatible;
@@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void)
 	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
+
+static void __init nokia_n900_legacy_init(void)
+{
+	hsmmc2_internal_input_clk();
+
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
+			pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+			/* set IBE to 1 */
+			rx51_secure_update_aux_cr(BIT(6), 0);
+		} else {
+			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+		}
+	}
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
@@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
 	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
-	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

arch/arm/mach-omap2/prminst44xx.c

@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
 					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 OMAP4430_PRM_DEVICE_INST,
+				 dev_inst,
 				 OMAP4_PRM_RSTCTRL_OFFSET);
 
 	/* OCP barrier */
 	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
+				    dev_inst,
 				    OMAP4_PRM_RSTCTRL_OFFSET);
 }

drivers/pinctrl/pinctrl-capri.c

@@ -1435,7 +1435,7 @@ int __init capri_pinctrl_probe(struct platform_device *pdev)
 }
 
 static struct of_device_id capri_pinctrl_of_match[] = {
-	{ .compatible = "brcm,capri-pinctrl", },
+	{ .compatible = "brcm,bcm11351-pinctrl", },
 	{ },
 };
 

include/linux/clk/ti.h

@@ -245,6 +245,10 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 void omap2_init_clk_clkdm(struct clk_hw *clk);
 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate);
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate);
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);