forked from luck/tmp_suning_uos_patched
MIPS: NI 169445 board support
Support the National Instruments 169445 board. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16782/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Nathan Sullivan
Ralf Baechle
parent
0c4037b9dd
commit
7aacf86b75
7
Documentation/devicetree/bindings/mips/ni.txt
Normal file
7
Documentation/devicetree/bindings/mips/ni.txt
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
National Instruments MIPS platforms
|
||||
|
||||
required root node properties:
|
||||
- compatible: must be "ni,169445"
|
||||
|
||||
CPU Nodes
|
||||
- compatible: must be "mti,mips14KEc"
|
||||
|
|
@ -5,6 +5,7 @@ dts-dirs += ingenic
|
|||
dts-dirs += lantiq
|
||||
dts-dirs += mti
|
||||
dts-dirs += netlogic
|
||||
dts-dirs += ni
|
||||
dts-dirs += pic32
|
||||
dts-dirs += qca
|
||||
dts-dirs += ralink
|
||||
|
|
|
|||
100
arch/mips/boot/dts/ni/169445.dts
Normal file
100
arch/mips/boot/dts/ni/169445.dts
Normal file
|
|
@ -0,0 +1,100 @@
|
|||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ni,169445";
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "mti,mips14KEc";
|
||||
clocks = <&baseclk>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x10000000>;
|
||||
};
|
||||
|
||||
baseclk: baseclock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
cpu_intc: interrupt-controller {
|
||||
#address-cells = <0>;
|
||||
compatible = "mti,cpu-interrupt-controller";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
ahb@1f300000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x1f300000 0x80FFF>;
|
||||
|
||||
gpio1: gpio@10 {
|
||||
compatible = "ni,169445-nand-gpio";
|
||||
reg = <0x10 0x4>;
|
||||
reg-names = "dat";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: gpio@14 {
|
||||
compatible = "ni,169445-nand-gpio";
|
||||
reg = <0x14 0x4>;
|
||||
reg-names = "dat";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
no-output;
|
||||
};
|
||||
|
||||
nand@0 {
|
||||
compatible = "gpio-control-nand";
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-mode = "soft_bch";
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-ecc-strength = <4>;
|
||||
reg = <0x0 4>;
|
||||
gpios = <&gpio2 0 0>, /* rdy */
|
||||
<&gpio1 1 0>, /* nce */
|
||||
<&gpio1 2 0>, /* ale */
|
||||
<&gpio1 3 0>, /* cle */
|
||||
<&gpio1 4 0>; /* nwp */
|
||||
};
|
||||
|
||||
serial@80000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x80000 0x1000>;
|
||||
interrupt-parent = <&cpu_intc>;
|
||||
interrupts = <6>;
|
||||
clocks = <&baseclk>;
|
||||
reg-shift = <0>;
|
||||
};
|
||||
|
||||
ethernet@40000 {
|
||||
compatible = "snps,dwmac-4.10a";
|
||||
interrupt-parent = <&cpu_intc>;
|
||||
interrupts = <5>;
|
||||
interrupt-names = "macirq";
|
||||
reg = <0x40000 0x2000>;
|
||||
clock-names = "stmmaceth", "pclk";
|
||||
clocks = <&baseclk>, <&baseclk>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
7
arch/mips/boot/dts/ni/Makefile
Normal file
7
arch/mips/boot/dts/ni/Makefile
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445) += 169445.dtb
|
||||
|
||||
# Force kbuild to make empty built-in.o if necessary
|
||||
obj- += dummy.o
|
||||
|
||||
always := $(dtb-y)
|
||||
clean-files := *.dtb *.dtb.S
|
||||
27
arch/mips/configs/generic/board-ni169445.config
Normal file
27
arch/mips/configs/generic/board-ni169445.config
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
CONFIG_FIT_IMAGE_FDT_NI169445=y
|
||||
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_BCH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_GPIO=y
|
||||
CONFIG_MTD_NAND_IDS=y
|
||||
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_STMMAC_PLATFORM=y
|
||||
CONFIG_DWMAC_GENERIC=y
|
||||
|
|
@ -36,4 +36,10 @@ config FIT_IMAGE_FDT_BOSTON
|
|||
enable this if you wish to boot on a MIPS Boston board, as it is
|
||||
expected by the bootloader.
|
||||
|
||||
config FIT_IMAGE_FDT_NI169445
|
||||
bool "Include FDT for NI 169445"
|
||||
help
|
||||
Enable this to include the FDT for the 169445 platform from
|
||||
National Instruments in the FIT kernel image.
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -54,3 +54,28 @@
|
|||
};
|
||||
};
|
||||
#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */
|
||||
|
||||
#ifdef CONFIG_FIT_IMAGE_FDT_NI169445
|
||||
/ {
|
||||
images {
|
||||
fdt@ni169445 {
|
||||
description = "NI 169445 device tree";
|
||||
data = /incbin/("boot/dts/ni/169445.dtb");
|
||||
type = "flat_dt";
|
||||
arch = "mips";
|
||||
compression = "none";
|
||||
hash@0 {
|
||||
algo = "sha1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
configurations {
|
||||
conf@ni169445 {
|
||||
description = "NI 169445 Linux Kernel";
|
||||
kernel = "kernel@0";
|
||||
fdt = "fdt@ni169445";
|
||||
};
|
||||
};
|
||||
};
|
||||
#endif /* CONFIG_FIT_IMAGE_FDT_NI169445 */
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user