AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[ARM] 4354/1: AT91: Support ADS7846 touchsceen on SAM9263-EK board

Browse Source 
Add support for the ADS7846 Touchscreen found on the Atmel
AT91SAM9263-EK board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor 2007-05-02 18:00:45 +01:00 committed by Russell King
parent 235227285b
commit 7c73628f24
1 changed files with 48 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
arch/arm/mach-at91/board-sam9263ek.c
View File

@ -25,6 +25,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/setup.h> #include <asm/setup.h>
@ -85,6 +86,40 @@ static struct at91_udc_data __initdata ek_udc_data = {
}; };
/*
* ADS7846 Touchscreen
*/
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static int ads7843_pendown_state(void)
{
return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
}
static struct ads7846_platform_data ads_info = {
.model = 7843,
.x_min = 150,
.x_max = 3830,
.y_min = 190,
.y_max = 3830,
.vref_delay_usecs = 100,
.x_plate_ohms = 450,
.y_plate_ohms = 250,
.pressure_max = 15000,
.debounce_max = 1,
.debounce_rep = 0,
.debounce_tol = (~0),
.get_pendown_state = ads7843_pendown_state,
};
static void __init ek_add_device_ts(void)
{
at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */
}
#else
static void __init ek_add_device_ts(void) {}
#endif
/* /*
* SPI devices. * SPI devices.
*/ */
@ -97,6 +132,16 @@ static struct spi_board_info ek_spi_devices[] = {
.bus_num = 0, .bus_num = 0,
}, },
#endif #endif
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
{
.modalias = "ads7846",
.chip_select = 3,
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
.irq = AT91SAM9263_ID_IRQ1,
},
#endif
}; };
@ -157,7 +202,10 @@ static void __init ek_board_init(void)
/* USB Device */ /* USB Device */
at91_add_device_udc(&ek_udc_data); at91_add_device_udc(&ek_udc_data);
/* SPI */ /* SPI */
at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* Touchscreen */
ek_add_device_ts();
/* MMC */ /* MMC */
at91_add_device_mmc(1, &ek_mmc_data); at91_add_device_mmc(1, &ek_mmc_data);
/* NAND */ /* NAND */