ASoC: fsl: add imx-es8328 machine driver

This adds an initial machine driver for the ES8328 audio codec on Freescale
boards.  The driver supports headphones and an audio regulator for an onboard
speaker amp.

Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Documentation/devicetree/bindings/sound/imx-audio-es8328.txt

@@ -0,0 +1,60 @@
+Freescale i.MX audio complex with ES8328 codec
+
+Required properties:
+- compatible       : "fsl,imx-audio-es8328"
+- model            : The user-visible name of this sound complex
+- ssi-controller   : The phandle of the i.MX SSI controller
+- jack-gpio        : Optional GPIO for headphone jack
+- audio-amp-supply : Power regulator for speaker amps
+- audio-codec      : The phandle of the ES8328 audio codec
+- audio-routing    : A list of the connections between audio components.
+                     Each entry is a pair of strings, the first being the
+		     connection's sink, the second being the connection's
+		     source. Valid names could be power supplies, ES8328
+		     pins, and the jacks on the board:
+
+			Power supplies:
+			   * audio-amp
+
+			ES8328 pins:
+			   * LOUT1
+			   * LOUT2
+			   * ROUT1
+			   * ROUT2
+			   * LINPUT1
+			   * LINPUT2
+			   * RINPUT1
+			   * RINPUT2
+			   * Mic PGA
+
+			Board connectors:
+			   * Headphone
+			   * Speaker
+			   * Mic Jack
+- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx-audio-es8328";
+	model = "imx-audio-es8328";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&codec>;
+	jack-gpio = <&gpio5 15 0>;
+	audio-amp-supply = <&reg_audio_amp>;
+	audio-routing =
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+		"Speaker", "audio-amp",
+		"Headphone", "ROUT1",
+		"Headphone", "LOUT1",
+		"LINPUT1", "Mic Jack",
+		"RINPUT1", "Mic Jack",
+		"Mic Jack", "Mic Bias";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};

sound/soc/fsl/Kconfig

@@ -257,6 +257,20 @@ config SND_SOC_IMX_WM8962
 	  Say Y if you want to add support for SoC audio on an i.MX board with
 	  a wm8962 codec.
 
+config SND_SOC_IMX_ES8328
+	tristate "SoC Audio support for i.MX boards with the ES8328 codec"
+	depends on OF && (I2C || SPI)
+	select SND_SOC_ES8328_I2C if I2C
+	select SND_SOC_ES8328_SPI if SPI_MASTER
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
+	select SND_SOC_IMX_PCM_FIQ
+	help
+	  Say Y if you want to add support for the ES8328 audio codec connected
+	  via SSI/I2S over either SPI or I2C.
+
 config SND_SOC_IMX_SGTL5000
 	tristate "SoC Audio support for i.MX boards with sgtl5000"
 	depends on OF && I2C

sound/soc/fsl/Makefile

@@ -52,6 +52,7 @@ snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
 snd-soc-phycore-ac97-objs := phycore-ac97.o
 snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
 snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+snd-soc-imx-es8328-objs := imx-es8328.o
 snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
 snd-soc-imx-wm8962-objs := imx-wm8962.o
 snd-soc-imx-spdif-objs := imx-spdif.o
@@ -61,6 +62,7 @@ obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
 obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
 obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
 obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
+obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
 obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
 obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
 obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o

sound/soc/fsl/imx-es8328.c

@@ -0,0 +1,232 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/i2c.h>
+#include <linux/of_gpio.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "imx-audmux.h"
+
+#define DAI_NAME_SIZE	32
+#define MUX_PORT_MAX	7
+
+struct imx_es8328_data {
+	struct device *dev;
+	struct snd_soc_dai_link dai;
+	struct snd_soc_card card;
+	char codec_dai_name[DAI_NAME_SIZE];
+	char platform_name[DAI_NAME_SIZE];
+	int jack_gpio;
+};
+
+static struct snd_soc_jack_gpio headset_jack_gpios[] = {
+	{
+		.gpio = -1,
+		.name = "headset-gpio",
+		.report = SND_JACK_HEADSET,
+		.invert = 0,
+		.debounce_time = 200,
+	},
+};
+
+static struct snd_soc_jack headset_jack;
+
+static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct imx_es8328_data *data = container_of(rtd->card,
+					struct imx_es8328_data, card);
+	int ret = 0;
+
+	/* Headphone jack detection */
+	if (gpio_is_valid(data->jack_gpio)) {
+		ret = snd_soc_jack_new(rtd->codec, "Headphone",
+				       SND_JACK_HEADPHONE | SND_JACK_BTN_0,
+				       &headset_jack);
+		if (ret)
+			return ret;
+
+		headset_jack_gpios[0].gpio = data->jack_gpio;
+		ret = snd_soc_jack_add_gpios(&headset_jack,
+					     ARRAY_SIZE(headset_jack_gpios),
+					     headset_jack_gpios);
+	}
+
+	return ret;
+}
+
+static const struct snd_soc_dapm_widget imx_es8328_dapm_widgets[] = {
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_REGULATOR_SUPPLY("audio-amp", 1, 0),
+};
+
+static int imx_es8328_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *ssi_np, *codec_np;
+	struct platform_device *ssi_pdev;
+	struct imx_es8328_data *data;
+	u32 int_port, ext_port;
+	int ret;
+	struct device *dev = &pdev->dev;
+
+	ret = of_property_read_u32(np, "mux-int-port", &int_port);
+	if (ret) {
+		dev_err(dev, "mux-int-port missing or invalid\n");
+		goto fail;
+	}
+	if (int_port > MUX_PORT_MAX || int_port == 0) {
+		dev_err(dev, "mux-int-port: hardware only has %d mux ports\n",
+			MUX_PORT_MAX);
+		goto fail;
+	}
+
+	ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
+	if (ret) {
+		dev_err(dev, "mux-ext-port missing or invalid\n");
+		goto fail;
+	}
+	if (ext_port > MUX_PORT_MAX || ext_port == 0) {
+		dev_err(dev, "mux-ext-port: hardware only has %d mux ports\n",
+			MUX_PORT_MAX);
+		goto fail;
+	}
+
+	/*
+	 * The port numbering in the hardware manual starts at 1, while
+	 * the audmux API expects it starts at 0.
+	 */
+	int_port--;
+	ext_port--;
+	ret = imx_audmux_v2_configure_port(int_port,
+			IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
+	if (ret) {
+		dev_err(dev, "audmux internal port setup failed\n");
+		return ret;
+	}
+	ret = imx_audmux_v2_configure_port(ext_port,
+			IMX_AUDMUX_V2_PTCR_SYN,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
+	if (ret) {
+		dev_err(dev, "audmux external port setup failed\n");
+		return ret;
+	}
+
+	ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0);
+	codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
+	if (!ssi_np || !codec_np) {
+		dev_err(dev, "phandle missing or invalid\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	ssi_pdev = of_find_device_by_node(ssi_np);
+	if (!ssi_pdev) {
+		dev_err(dev, "failed to find SSI platform device\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	data->dev = dev;
+
+	data->jack_gpio = of_get_named_gpio(pdev->dev.of_node, "jack-gpio", 0);
+
+	data->dai.name = "hifi";
+	data->dai.stream_name = "hifi";
+	data->dai.codec_dai_name = "es8328-hifi-analog";
+	data->dai.codec_of_node = codec_np;
+	data->dai.cpu_of_node = ssi_np;
+	data->dai.platform_of_node = ssi_np;
+	data->dai.init = &imx_es8328_dai_init;
+	data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+			    SND_SOC_DAIFMT_CBM_CFM;
+
+	data->card.dev = dev;
+	data->card.dapm_widgets = imx_es8328_dapm_widgets;
+	data->card.num_dapm_widgets = ARRAY_SIZE(imx_es8328_dapm_widgets);
+	ret = snd_soc_of_parse_card_name(&data->card, "model");
+	if (ret) {
+		dev_err(dev, "Unable to parse card name\n");
+		goto fail;
+	}
+	ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
+	if (ret) {
+		dev_err(dev, "Unable to parse routing: %d\n", ret);
+		goto fail;
+	}
+	data->card.num_links = 1;
+	data->card.owner = THIS_MODULE;
+	data->card.dai_link = &data->dai;
+
+	ret = snd_soc_register_card(&data->card);
+	if (ret) {
+		dev_err(dev, "Unable to register: %d\n", ret);
+		goto fail;
+	}
+
+	platform_set_drvdata(pdev, data);
+fail:
+	of_node_put(ssi_np);
+	of_node_put(codec_np);
+
+	return ret;
+}
+
+static int imx_es8328_remove(struct platform_device *pdev)
+{
+	struct imx_es8328_data *data = platform_get_drvdata(pdev);
+
+	snd_soc_jack_free_gpios(&headset_jack, ARRAY_SIZE(headset_jack_gpios),
+				headset_jack_gpios);
+
+	snd_soc_unregister_card(&data->card);
+
+	return 0;
+}
+
+static const struct of_device_id imx_es8328_dt_ids[] = {
+	{ .compatible = "fsl,imx-audio-es8328", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_es8328_dt_ids);
+
+static struct platform_driver imx_es8328_driver = {
+	.driver = {
+		.name = "imx-es8328",
+		.of_match_table = imx_es8328_dt_ids,
+	},
+	.probe = imx_es8328_probe,
+	.remove = imx_es8328_remove,
+};
+module_platform_driver(imx_es8328_driver);
+
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_DESCRIPTION("Kosagi i.MX6 ES8328 ASoC machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-audio-es8328");