forked from luck/tmp_suning_uos_patched
dt-bindings: Add Pervasive Displays RePaper bindings
Add device-tree binding documentation for the 1.44", 1.9", 2.0" and 2.7" display panels. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496934875-51984-3-git-send-email-noralf@tronnes.org
This commit is contained in:
parent
d432d6922b
commit
7f0dc77772
52
Documentation/devicetree/bindings/display/repaper.txt
Normal file
52
Documentation/devicetree/bindings/display/repaper.txt
Normal file
|
@ -0,0 +1,52 @@
|
|||
Pervasive Displays RePaper branded e-ink displays
|
||||
|
||||
Required properties:
|
||||
- compatible: "pervasive,e1144cs021" for 1.44" display
|
||||
"pervasive,e1190cs021" for 1.9" display
|
||||
"pervasive,e2200cs021" for 2.0" display
|
||||
"pervasive,e2271cs021" for 2.7" display
|
||||
|
||||
- panel-on-gpios: Timing controller power control
|
||||
- discharge-gpios: Discharge control
|
||||
- reset-gpios: RESET pin
|
||||
- busy-gpios: BUSY pin
|
||||
|
||||
Required property for e2271cs021:
|
||||
- border-gpios: Border control
|
||||
|
||||
The node for this driver must be a child node of a SPI controller, hence
|
||||
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
||||
|
||||
Optional property:
|
||||
- pervasive,thermal-zone: name of thermometer's thermal zone
|
||||
|
||||
Example:
|
||||
|
||||
display_temp: lm75@48 {
|
||||
compatible = "lm75b";
|
||||
reg = <0x48>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
display {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&display_temp>;
|
||||
};
|
||||
};
|
||||
|
||||
papirus27@0{
|
||||
compatible = "pervasive,e2271cs021";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <8000000>;
|
||||
|
||||
panel-on-gpios = <&gpio 23 0>;
|
||||
border-gpios = <&gpio 14 0>;
|
||||
discharge-gpios = <&gpio 15 0>;
|
||||
reset-gpios = <&gpio 24 0>;
|
||||
busy-gpios = <&gpio 25 0>;
|
||||
|
||||
pervasive,thermal-zone = "display";
|
||||
};
|
Loading…
Reference in New Issue
Block a user