forked from luck/tmp_suning_uos_patched
hwmon: Support ADI Fan Control IP
The purpose of this IP Core is to control the fan used for the cooling of a Xilinx Zynq Ultrascale+ MPSoC without the need of any external temperature sensors. To achieve this, the IP core uses the PL SYSMONE4 primitive to obtain the PL temperature and, based on those readings, it then outputs a PWM signal to control the fan rotation accordingly. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20191009102806.262241-1-nuno.sa@analog.com [groeck: adi,pulses-per-revolution -> pulses-per-revolution; dropped unused 'res' from probe function] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Nuno Sá
Guenter Roeck
parent
2c523b344d
commit
8412b410fa
|
|
@ -2957,6 +2957,13 @@ S: Maintained
|
|||
F: Documentation/devicetree/bindings/sound/axentia,*
|
||||
F: sound/soc/atmel/tse850-pcm5142.c
|
||||
|
||||
AXI-FAN-CONTROL HARDWARE MONITOR DRIVER
|
||||
M: Nuno Sá <nuno.sa@analog.com>
|
||||
W: http://ez.analog.com/community/linux-device-drivers
|
||||
L: linux-hwmon@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/hwmon/axi-fan-control.c
|
||||
|
||||
AXXIA I2C CONTROLLER
|
||||
M: Krzysztof Adamski <krzysztof.adamski@nokia.com>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
|
|
|
|||
|
|
@ -280,6 +280,15 @@ config SENSORS_ASC7621
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called asc7621.
|
||||
|
||||
config SENSORS_AXI_FAN_CONTROL
|
||||
tristate "Analog Devices FAN Control HDL Core driver"
|
||||
help
|
||||
If you say yes here you get support for the Analog Devices
|
||||
AXI HDL FAN monitoring core.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called axi-fan-control
|
||||
|
||||
config SENSORS_K8TEMP
|
||||
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
||||
depends on X86 && PCI
|
||||
|
|
|
|||
|
|
@ -52,6 +52,7 @@ obj-$(CONFIG_SENSORS_AS370) += as370-hwmon.o
|
|||
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
|
||||
obj-$(CONFIG_SENSORS_ASPEED) += aspeed-pwm-tacho.o
|
||||
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
|
||||
obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
|
||||
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
|
||||
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
|
||||
obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
|
||||
|
|
|
|||
469
drivers/hwmon/axi-fan-control.c
Normal file
469
drivers/hwmon/axi-fan-control.c
Normal file
|
|
@ -0,0 +1,469 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Fan Control HDL CORE driver
|
||||
*
|
||||
* Copyright 2019 Analog Devices Inc.
|
||||
*/
|
||||
#include <linux/bits.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/fpga/adi-axi-common.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define ADI_AXI_PCORE_VER_MAJOR(version) (((version) >> 16) & 0xff)
|
||||
#define ADI_AXI_PCORE_VER_MINOR(version) (((version) >> 8) & 0xff)
|
||||
#define ADI_AXI_PCORE_VER_PATCH(version) ((version) & 0xff)
|
||||
|
||||
/* register map */
|
||||
#define ADI_REG_RSTN 0x0080
|
||||
#define ADI_REG_PWM_WIDTH 0x0084
|
||||
#define ADI_REG_TACH_PERIOD 0x0088
|
||||
#define ADI_REG_TACH_TOLERANCE 0x008c
|
||||
#define ADI_REG_PWM_PERIOD 0x00c0
|
||||
#define ADI_REG_TACH_MEASUR 0x00c4
|
||||
#define ADI_REG_TEMPERATURE 0x00c8
|
||||
|
||||
#define ADI_REG_IRQ_MASK 0x0040
|
||||
#define ADI_REG_IRQ_PENDING 0x0044
|
||||
#define ADI_REG_IRQ_SRC 0x0048
|
||||
|
||||
/* IRQ sources */
|
||||
#define ADI_IRQ_SRC_PWM_CHANGED BIT(0)
|
||||
#define ADI_IRQ_SRC_TACH_ERR BIT(1)
|
||||
#define ADI_IRQ_SRC_TEMP_INCREASE BIT(2)
|
||||
#define ADI_IRQ_SRC_NEW_MEASUR BIT(3)
|
||||
#define ADI_IRQ_SRC_MASK GENMASK(3, 0)
|
||||
#define ADI_IRQ_MASK_OUT_ALL 0xFFFFFFFFU
|
||||
|
||||
#define SYSFS_PWM_MAX 255
|
||||
|
||||
struct axi_fan_control_data {
|
||||
void __iomem *base;
|
||||
struct device *hdev;
|
||||
unsigned long clk_rate;
|
||||
int irq;
|
||||
/* pulses per revolution */
|
||||
u32 ppr;
|
||||
bool hw_pwm_req;
|
||||
bool update_tacho_params;
|
||||
u8 fan_fault;
|
||||
};
|
||||
|
||||
static inline void axi_iowrite(const u32 val, const u32 reg,
|
||||
const struct axi_fan_control_data *ctl)
|
||||
{
|
||||
iowrite32(val, ctl->base + reg);
|
||||
}
|
||||
|
||||
static inline u32 axi_ioread(const u32 reg,
|
||||
const struct axi_fan_control_data *ctl)
|
||||
{
|
||||
return ioread32(ctl->base + reg);
|
||||
}
|
||||
|
||||
static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
|
||||
{
|
||||
u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
|
||||
u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
|
||||
/*
|
||||
* PWM_PERIOD is a RO register set by the core. It should never be 0.
|
||||
* For now we are trusting the HW...
|
||||
*/
|
||||
return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
|
||||
}
|
||||
|
||||
static int axi_fan_control_set_pwm_duty(const long val,
|
||||
struct axi_fan_control_data *ctl)
|
||||
{
|
||||
u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
|
||||
u32 new_width;
|
||||
long __val = clamp_val(val, 0, SYSFS_PWM_MAX);
|
||||
|
||||
new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);
|
||||
|
||||
axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
|
||||
{
|
||||
const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
|
||||
|
||||
if (tach == 0)
|
||||
/* should we return error, EAGAIN maybe? */
|
||||
return 0;
|
||||
/*
|
||||
* The tacho period should be:
|
||||
* TACH = 60/(ppr * rpm), where rpm is revolutions per second
|
||||
* and ppr is pulses per revolution.
|
||||
* Given the tacho period, we can multiply it by the input clock
|
||||
* so that we know how many clocks we need to have this period.
|
||||
* From this, we can derive the RPM value.
|
||||
*/
|
||||
return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
|
||||
}
|
||||
|
||||
static int axi_fan_control_read_temp(struct device *dev, u32 attr, long *val)
|
||||
{
|
||||
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
||||
long raw_temp;
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_temp_input:
|
||||
raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
|
||||
/*
|
||||
* The formula for the temperature is:
|
||||
* T = (ADC * 501.3743 / 2^bits) - 273.6777
|
||||
* It's multiplied by 1000 to have millidegrees as
|
||||
* specified by the hwmon sysfs interface.
|
||||
*/
|
||||
*val = ((raw_temp * 501374) >> 16) - 273677;
|
||||
return 0;
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int axi_fan_control_read_fan(struct device *dev, u32 attr, long *val)
|
||||
{
|
||||
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_fan_fault:
|
||||
*val = ctl->fan_fault;
|
||||
/* clear it now */
|
||||
ctl->fan_fault = 0;
|
||||
return 0;
|
||||
case hwmon_fan_input:
|
||||
*val = axi_fan_control_get_fan_rpm(ctl);
|
||||
return 0;
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int axi_fan_control_read_pwm(struct device *dev, u32 attr, long *val)
|
||||
{
|
||||
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
*val = axi_fan_control_get_pwm_duty(ctl);
|
||||
return 0;
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
|
||||
{
|
||||
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
return axi_fan_control_set_pwm_duty(val, ctl);
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int axi_fan_control_read_labels(struct device *dev,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, const char **str)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
*str = "FAN";
|
||||
return 0;
|
||||
case hwmon_temp:
|
||||
*str = "SYSMON4";
|
||||
return 0;
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int axi_fan_control_read(struct device *dev,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long *val)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
return axi_fan_control_read_fan(dev, attr, val);
|
||||
case hwmon_pwm:
|
||||
return axi_fan_control_read_pwm(dev, attr, val);
|
||||
case hwmon_temp:
|
||||
return axi_fan_control_read_temp(dev, attr, val);
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int axi_fan_control_write(struct device *dev,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long val)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_pwm:
|
||||
return axi_fan_control_write_pwm(dev, attr, val);
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static umode_t axi_fan_control_fan_is_visible(const u32 attr)
|
||||
{
|
||||
switch (attr) {
|
||||
case hwmon_fan_input:
|
||||
case hwmon_fan_fault:
|
||||
case hwmon_fan_label:
|
||||
return 0444;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
|
||||
{
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
return 0644;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static umode_t axi_fan_control_temp_is_visible(const u32 attr)
|
||||
{
|
||||
switch (attr) {
|
||||
case hwmon_temp_input:
|
||||
case hwmon_temp_label:
|
||||
return 0444;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static umode_t axi_fan_control_is_visible(const void *data,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
return axi_fan_control_fan_is_visible(attr);
|
||||
case hwmon_pwm:
|
||||
return axi_fan_control_pwm_is_visible(attr);
|
||||
case hwmon_temp:
|
||||
return axi_fan_control_temp_is_visible(attr);
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* This core has two main ways of changing the PWM duty cycle. It is done,
|
||||
* either by a request from userspace (writing on pwm1_input) or by the
|
||||
* core itself. When the change is done by the core, it will use predefined
|
||||
* parameters to evaluate the tach signal and, on that case we cannot set them.
|
||||
* On the other hand, when the request is done by the user, with some arbitrary
|
||||
* value that the core does not now about, we have to provide the tach
|
||||
* parameters so that, the core can evaluate the signal. On the IRQ handler we
|
||||
* distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
|
||||
* us that the CORE requested a new duty cycle. After this, there is 5s delay
|
||||
* on which the core waits for the fan rotation speed to stabilize. After this
|
||||
* we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
|
||||
* the tach parameters or not on the next tach measurement cycle (corresponding
|
||||
* already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
|
||||
*/
|
||||
static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
|
||||
{
|
||||
struct axi_fan_control_data *ctl = (struct axi_fan_control_data *)data;
|
||||
u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
|
||||
u32 clear_mask;
|
||||
|
||||
if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
|
||||
if (ctl->update_tacho_params) {
|
||||
u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
|
||||
|
||||
/* get 25% tolerance */
|
||||
u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
|
||||
/* set new tacho parameters */
|
||||
axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
|
||||
axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
|
||||
ctl->update_tacho_params = false;
|
||||
}
|
||||
}
|
||||
|
||||
if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
|
||||
/*
|
||||
* if the pwm changes on behalf of software,
|
||||
* we need to provide new tacho parameters to the core.
|
||||
* Wait for the next measurement for that...
|
||||
*/
|
||||
if (!ctl->hw_pwm_req) {
|
||||
ctl->update_tacho_params = true;
|
||||
} else {
|
||||
ctl->hw_pwm_req = false;
|
||||
sysfs_notify(&ctl->hdev->kobj, NULL, "pwm1");
|
||||
}
|
||||
}
|
||||
|
||||
if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
|
||||
/* hardware requested a new pwm */
|
||||
ctl->hw_pwm_req = true;
|
||||
|
||||
if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
|
||||
ctl->fan_fault = 1;
|
||||
|
||||
/* clear all interrupts */
|
||||
clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
|
||||
axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int axi_fan_control_init(struct axi_fan_control_data *ctl,
|
||||
const struct device_node *np)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* get fan pulses per revolution */
|
||||
ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* 1, 2 and 4 are the typical and accepted values */
|
||||
if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
|
||||
return -EINVAL;
|
||||
/*
|
||||
* Enable all IRQs
|
||||
*/
|
||||
axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
|
||||
~(ADI_IRQ_SRC_NEW_MEASUR | ADI_IRQ_SRC_TACH_ERR |
|
||||
ADI_IRQ_SRC_PWM_CHANGED | ADI_IRQ_SRC_TEMP_INCREASE),
|
||||
ADI_REG_IRQ_MASK, ctl);
|
||||
|
||||
/* bring the device out of reset */
|
||||
axi_iowrite(0x01, ADI_REG_RSTN, ctl);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct hwmon_channel_info *axi_fan_control_info[] = {
|
||||
HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
|
||||
HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL),
|
||||
HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct hwmon_ops axi_fan_control_hwmon_ops = {
|
||||
.is_visible = axi_fan_control_is_visible,
|
||||
.read = axi_fan_control_read,
|
||||
.write = axi_fan_control_write,
|
||||
.read_string = axi_fan_control_read_labels,
|
||||
};
|
||||
|
||||
static const struct hwmon_chip_info axi_chip_info = {
|
||||
.ops = &axi_fan_control_hwmon_ops,
|
||||
.info = axi_fan_control_info,
|
||||
};
|
||||
|
||||
static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
|
||||
|
||||
static const struct of_device_id axi_fan_control_of_match[] = {
|
||||
{ .compatible = "adi,axi-fan-control-1.00.a",
|
||||
.data = (void *)&version_1_0_0},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
|
||||
|
||||
static int axi_fan_control_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct axi_fan_control_data *ctl;
|
||||
struct clk *clk;
|
||||
const struct of_device_id *id;
|
||||
const char *name = "axi_fan_control";
|
||||
u32 version;
|
||||
int ret;
|
||||
|
||||
id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
|
||||
if (!id)
|
||||
return -EINVAL;
|
||||
|
||||
ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
|
||||
if (!ctl)
|
||||
return -ENOMEM;
|
||||
|
||||
ctl->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(ctl->base))
|
||||
return PTR_ERR(ctl->base);
|
||||
|
||||
clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(clk)) {
|
||||
dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
|
||||
return PTR_ERR(clk);
|
||||
}
|
||||
|
||||
ctl->clk_rate = clk_get_rate(clk);
|
||||
if (!ctl->clk_rate)
|
||||
return -EINVAL;
|
||||
|
||||
version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
|
||||
if (ADI_AXI_PCORE_VER_MAJOR(version) !=
|
||||
ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data))) {
|
||||
dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
|
||||
ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data)),
|
||||
ADI_AXI_PCORE_VER_MINOR((*(u32 *)id->data)),
|
||||
ADI_AXI_PCORE_VER_PATCH((*(u32 *)id->data)),
|
||||
ADI_AXI_PCORE_VER_MAJOR(version),
|
||||
ADI_AXI_PCORE_VER_MINOR(version),
|
||||
ADI_AXI_PCORE_VER_PATCH(version));
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ctl->irq = platform_get_irq(pdev, 0);
|
||||
if (ctl->irq < 0)
|
||||
return ctl->irq;
|
||||
|
||||
ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
|
||||
axi_fan_control_irq_handler,
|
||||
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
|
||||
pdev->driver_override, ctl);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to request an irq, %d", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = axi_fan_control_init(ctl, pdev->dev.of_node);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "Failed to initialize device\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
|
||||
name,
|
||||
ctl,
|
||||
&axi_chip_info,
|
||||
NULL);
|
||||
|
||||
return PTR_ERR_OR_ZERO(ctl->hdev);
|
||||
}
|
||||
|
||||
static struct platform_driver axi_fan_control_driver = {
|
||||
.driver = {
|
||||
.name = "axi_fan_control_driver",
|
||||
.of_match_table = axi_fan_control_of_match,
|
||||
},
|
||||
.probe = axi_fan_control_probe,
|
||||
};
|
||||
module_platform_driver(axi_fan_control_driver);
|
||||
|
||||
MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
|
||||
MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user