From 86db36a347b4ea030ee3e6c73ce04e35e4732999 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Nov 2019 02:11:54 +0200 Subject: [PATCH] net: dsa: sja1105: Implement state machine for TAS with PTP clock source Tested using the following bash script and the tc from iproute2-next: #!/bin/bash set -e -u -o pipefail NSEC_PER_SEC="1000000000" gatemask() { local tc_list="$1" local mask=0 for tc in ${tc_list}; do mask=$((${mask} | (1 << ${tc}))) done printf "%02x" ${mask} } if ! systemctl is-active --quiet ptp4l; then echo "Please start the ptp4l service" exit fi now=$(phc_ctl /dev/ptp1 get | gawk '/clock time is/ { print $5; }') # Phase-align the base time to the start of the next second. sec=$(echo "${now}" | gawk -F. '{ print $1; }') base_time="$(((${sec} + 1) * ${NSEC_PER_SEC}))" tc qdisc add dev swp5 parent root handle 100 taprio \ num_tc 8 \ map 0 1 2 3 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time ${base_time} \ sched-entry S $(gatemask 7) 100000 \ sched-entry S $(gatemask "0 1 2 3 4 5 6") 400000 \ clockid CLOCK_TAI flags 2 The "state machine" is a workqueue invoked after each manipulation command on the PTP clock (reset, adjust time, set time, adjust frequency) which checks over the state of the time-aware scheduler. So it is not monitored periodically, only in reaction to a PTP command typically triggered from a userspace daemon (linuxptp). Otherwise there is no reason for things to go wrong. Now that the timecounter/cyclecounter has been replaced with hardware operations on the PTP clock, the TAS Kconfig now depends upon PTP and the standalone clocksource operating mode has been removed. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/Kconfig | 1 + drivers/net/dsa/sja1105/sja1105.h | 2 + drivers/net/dsa/sja1105/sja1105_ptp.c | 30 +- drivers/net/dsa/sja1105/sja1105_ptp.h | 12 + drivers/net/dsa/sja1105/sja1105_spi.c | 4 + drivers/net/dsa/sja1105/sja1105_tas.c | 428 +++++++++++++++++++++++++- drivers/net/dsa/sja1105/sja1105_tas.h | 27 ++ 7 files changed, 487 insertions(+), 17 deletions(-) diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig index ffac0ea4e8d5..0fe1ae173aa1 100644 --- a/drivers/net/dsa/sja1105/Kconfig +++ b/drivers/net/dsa/sja1105/Kconfig @@ -28,6 +28,7 @@ config NET_DSA_SJA1105_TAS bool "Support for the Time-Aware Scheduler on NXP SJA1105" depends on NET_DSA_SJA1105 && NET_SCH_TAPRIO depends on NET_SCH_TAPRIO=y || NET_DSA_SJA1105=m + depends on NET_DSA_SJA1105_PTP help This enables support for the TTEthernet-based egress scheduling engine in the SJA1105 DSA driver, which is controlled using a diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index 38340b74249e..29c7ed60cfdc 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -40,6 +40,8 @@ struct sja1105_regs { u64 ptp_control; u64 ptpclkval; u64 ptpclkrate; + u64 ptpclkcorp; + u64 ptpschtm; u64 ptpegr_ts[SJA1105_NUM_PORTS]; u64 pad_mii_tx[SJA1105_NUM_PORTS]; u64 pad_mii_id[SJA1105_NUM_PORTS]; diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c index 00014e836d3f..54258a25031d 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.c +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -201,6 +201,8 @@ void sja1105et_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, u64 valid = 1; sja1105_packing(buf, &valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->ptpstrtsch, 30, 30, size, op); + sja1105_packing(buf, &cmd->ptpstopsch, 29, 29, size, op); sja1105_packing(buf, &cmd->resptp, 2, 2, size, op); sja1105_packing(buf, &cmd->corrclk4ts, 1, 1, size, op); sja1105_packing(buf, &cmd->ptpclkadd, 0, 0, size, op); @@ -214,15 +216,17 @@ void sja1105pqrs_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, u64 valid = 1; sja1105_packing(buf, &valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->ptpstrtsch, 30, 30, size, op); + sja1105_packing(buf, &cmd->ptpstopsch, 29, 29, size, op); sja1105_packing(buf, &cmd->resptp, 3, 3, size, op); sja1105_packing(buf, &cmd->corrclk4ts, 2, 2, size, op); sja1105_packing(buf, &cmd->ptpclkadd, 0, 0, size, op); } -static int sja1105_ptp_commit(struct sja1105_private *priv, - struct sja1105_ptp_cmd *cmd, - sja1105_spi_rw_mode_t rw) +int sja1105_ptp_commit(struct dsa_switch *ds, struct sja1105_ptp_cmd *cmd, + sja1105_spi_rw_mode_t rw) { + const struct sja1105_private *priv = ds->priv; const struct sja1105_regs *regs = priv->info->regs; u8 buf[SJA1105_SIZE_PTP_CMD] = {0}; int rc; @@ -448,7 +452,9 @@ static int sja1105_ptp_reset(struct dsa_switch *ds) cmd.resptp = 1; dev_dbg(ds->dev, "Resetting PTP clock\n"); - rc = sja1105_ptp_commit(priv, &cmd, SPI_WRITE); + rc = sja1105_ptp_commit(ds, &cmd, SPI_WRITE); + + sja1105_tas_clockstep(priv->ds); mutex_unlock(&ptp_data->lock); @@ -504,7 +510,7 @@ static int sja1105_ptp_mode_set(struct sja1105_private *priv, ptp_data->cmd.ptpclkadd = mode; - return sja1105_ptp_commit(priv, &ptp_data->cmd, SPI_WRITE); + return sja1105_ptp_commit(priv->ds, &ptp_data->cmd, SPI_WRITE); } /* Write to PTPCLKVAL while PTPCLKADD is 0 */ @@ -521,7 +527,11 @@ int __sja1105_ptp_settime(struct dsa_switch *ds, u64 ns, return rc; } - return sja1105_ptpclkval_write(priv, ticks, ptp_sts); + rc = sja1105_ptpclkval_write(priv, ticks, ptp_sts); + + sja1105_tas_clockstep(priv->ds); + + return rc; } static int sja1105_ptp_settime(struct ptp_clock_info *ptp, @@ -563,6 +573,8 @@ static int sja1105_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) rc = sja1105_xfer_u32(priv, SPI_WRITE, regs->ptpclkrate, &clkrate32, NULL); + sja1105_tas_adjfreq(priv->ds); + mutex_unlock(&ptp_data->lock); return rc; @@ -581,7 +593,11 @@ int __sja1105_ptp_adjtime(struct dsa_switch *ds, s64 delta) return rc; } - return sja1105_ptpclkval_write(priv, ticks, NULL); + rc = sja1105_ptpclkval_write(priv, ticks, NULL); + + sja1105_tas_clockstep(priv->ds); + + return rc; } static int sja1105_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h index 83d9d4ae6d3a..470f44b76318 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.h +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -22,6 +22,8 @@ static inline s64 sja1105_ticks_to_ns(s64 ticks) } struct sja1105_ptp_cmd { + u64 ptpstrtsch; /* start schedule */ + u64 ptpstopsch; /* stop schedule */ u64 resptp; /* reset */ u64 corrclk4ts; /* use the corrected clock for timestamps */ u64 ptpclkadd; /* enum sja1105_ptp_clk_mode */ @@ -69,6 +71,9 @@ int __sja1105_ptp_settime(struct dsa_switch *ds, u64 ns, int __sja1105_ptp_adjtime(struct dsa_switch *ds, s64 delta); +int sja1105_ptp_commit(struct dsa_switch *ds, struct sja1105_ptp_cmd *cmd, + sja1105_spi_rw_mode_t rw); + #else struct sja1105_ptp_cmd; @@ -110,6 +115,13 @@ static inline int __sja1105_ptp_adjtime(struct dsa_switch *ds, s64 delta) return 0; } +static inline int sja1105_ptp_commit(struct dsa_switch *ds, + struct sja1105_ptp_cmd *cmd, + sja1105_spi_rw_mode_t rw) +{ + return 0; +} + #define sja1105et_ptp_cmd_packing NULL #define sja1105pqrs_ptp_cmd_packing NULL diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index ba245bd98124..fca3a973764b 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -539,9 +539,11 @@ static struct sja1105_regs sja1105et_regs = { .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8}, + .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */ .ptp_control = 0x17, .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */ .ptpclkrate = 0x1A, + .ptpclkcorp = 0x1D, }; static struct sja1105_regs sja1105pqrs_regs = { @@ -569,9 +571,11 @@ static struct sja1105_regs sja1105pqrs_regs = { .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, .qlevel = {0x604, 0x614, 0x624, 0x634, 0x644}, .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0}, + .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */ .ptp_control = 0x18, .ptpclkval = 0x19, .ptpclkrate = 0x1B, + .ptpclkcorp = 0x1E, }; struct sja1105_info sja1105e_info = { diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c index d846fb5c4e4d..26b925b5dace 100644 --- a/drivers/net/dsa/sja1105/sja1105_tas.c +++ b/drivers/net/dsa/sja1105/sja1105_tas.c @@ -10,6 +10,11 @@ #define SJA1105_TAS_MAX_DELTA BIT(19) #define SJA1105_GATE_MASK GENMASK_ULL(SJA1105_NUM_TC - 1, 0) +#define work_to_sja1105_tas(d) \ + container_of((d), struct sja1105_tas_data, tas_work) +#define tas_to_sja1105(d) \ + container_of((d), struct sja1105_private, tas_data) + /* This is not a preprocessor macro because the "ns" argument may or may not be * s64 at caller side. This ensures it is properly type-cast before div_s64. */ @@ -18,6 +23,100 @@ static s64 ns_to_sja1105_delta(s64 ns) return div_s64(ns, 200); } +static s64 sja1105_delta_to_ns(s64 delta) +{ + return delta * 200; +} + +/* Calculate the first base_time in the future that satisfies this + * relationship: + * + * future_base_time = base_time + N x cycle_time >= now, or + * + * now - base_time + * N >= --------------- + * cycle_time + * + * Because N is an integer, the ceiling value of the above "a / b" ratio + * is in fact precisely the floor value of "(a + b - 1) / b", which is + * easier to calculate only having integer division tools. + */ +static s64 future_base_time(s64 base_time, s64 cycle_time, s64 now) +{ + s64 a, b, n; + + if (base_time >= now) + return base_time; + + a = now - base_time; + b = cycle_time; + n = div_s64(a + b - 1, b); + + return base_time + n * cycle_time; +} + +static int sja1105_tas_set_runtime_params(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct dsa_switch *ds = priv->ds; + s64 earliest_base_time = S64_MAX; + s64 latest_base_time = 0; + s64 its_cycle_time = 0; + s64 max_cycle_time = 0; + int port; + + tas_data->enabled = false; + + for (port = 0; port < SJA1105_NUM_PORTS; port++) { + const struct tc_taprio_qopt_offload *offload; + + offload = tas_data->offload[port]; + if (!offload) + continue; + + tas_data->enabled = true; + + if (max_cycle_time < offload->cycle_time) + max_cycle_time = offload->cycle_time; + if (latest_base_time < offload->base_time) + latest_base_time = offload->base_time; + if (earliest_base_time > offload->base_time) { + earliest_base_time = offload->base_time; + its_cycle_time = offload->cycle_time; + } + } + + if (!tas_data->enabled) + return 0; + + /* Roll the earliest base time over until it is in a comparable + * time base with the latest, then compare their deltas. + * We want to enforce that all ports' base times are within + * SJA1105_TAS_MAX_DELTA 200ns cycles of one another. + */ + earliest_base_time = future_base_time(earliest_base_time, + its_cycle_time, + latest_base_time); + while (earliest_base_time > latest_base_time) + earliest_base_time -= its_cycle_time; + if (latest_base_time - earliest_base_time > + sja1105_delta_to_ns(SJA1105_TAS_MAX_DELTA)) { + dev_err(ds->dev, + "Base times too far apart: min %llu max %llu\n", + earliest_base_time, latest_base_time); + return -ERANGE; + } + + tas_data->earliest_base_time = earliest_base_time; + tas_data->max_cycle_time = max_cycle_time; + + dev_dbg(ds->dev, "earliest base time %lld ns\n", earliest_base_time); + dev_dbg(ds->dev, "latest base time %lld ns\n", latest_base_time); + dev_dbg(ds->dev, "longest cycle time %lld ns\n", max_cycle_time); + + return 0; +} + /* Lo and behold: the egress scheduler from hell. * * At the hardware level, the Time-Aware Shaper holds a global linear arrray of @@ -99,7 +198,11 @@ static int sja1105_init_scheduling(struct sja1105_private *priv) int num_cycles = 0; int cycle = 0; int i, k = 0; - int port; + int port, rc; + + rc = sja1105_tas_set_runtime_params(priv); + if (rc < 0) + return rc; /* Discard previous Schedule Table */ table = &priv->static_config.tables[BLK_IDX_SCHEDULE]; @@ -184,11 +287,13 @@ static int sja1105_init_scheduling(struct sja1105_private *priv) schedule_entry_points = table->entries; /* Finally start populating the static config tables */ - schedule_entry_points_params->clksrc = SJA1105_TAS_CLKSRC_STANDALONE; + schedule_entry_points_params->clksrc = SJA1105_TAS_CLKSRC_PTP; schedule_entry_points_params->actsubsch = num_cycles - 1; for (port = 0; port < SJA1105_NUM_PORTS; port++) { const struct tc_taprio_qopt_offload *offload; + /* Relative base time */ + s64 rbt; offload = tas_data->offload[port]; if (!offload) @@ -196,15 +301,21 @@ static int sja1105_init_scheduling(struct sja1105_private *priv) schedule_start_idx = k; schedule_end_idx = k + offload->num_entries - 1; - /* TODO this is the base time for the port's subschedule, - * relative to PTPSCHTM. But as we're using the standalone - * clock source and not PTP clock as time reference, there's - * little point in even trying to put more logic into this, - * like preserving the phases between the subschedules of - * different ports. We'll get all of that when switching to the - * PTP clock source. + /* This is the base time expressed as a number of TAS ticks + * relative to PTPSCHTM, which we'll (perhaps improperly) call + * the operational base time. */ - entry_point_delta = 1; + rbt = future_base_time(offload->base_time, + offload->cycle_time, + tas_data->earliest_base_time); + rbt -= tas_data->earliest_base_time; + /* UM10944.pdf 4.2.2. Schedule Entry Points table says that + * delta cannot be zero, which is shitty. Advance all relative + * base times by 1 TAS delta, so that even the earliest base + * time becomes 1 in relative terms. Then start the operational + * base time (PTPSCHTM) one TAS delta earlier than planned. + */ + entry_point_delta = ns_to_sja1105_delta(rbt) + 1; schedule_entry_points[cycle].subschindx = cycle; schedule_entry_points[cycle].delta = entry_point_delta; @@ -403,8 +514,303 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port, return sja1105_static_config_reload(priv, SJA1105_SCHEDULING); } +static int sja1105_tas_check_running(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct dsa_switch *ds = priv->ds; + struct sja1105_ptp_cmd cmd = {0}; + int rc; + + rc = sja1105_ptp_commit(ds, &cmd, SPI_READ); + if (rc < 0) + return rc; + + if (cmd.ptpstrtsch == 1) + /* Schedule successfully started */ + tas_data->state = SJA1105_TAS_STATE_RUNNING; + else if (cmd.ptpstopsch == 1) + /* Schedule is stopped */ + tas_data->state = SJA1105_TAS_STATE_DISABLED; + else + /* Schedule is probably not configured with PTP clock source */ + rc = -EINVAL; + + return rc; +} + +/* Write to PTPCLKCORP */ +static int sja1105_tas_adjust_drift(struct sja1105_private *priv, + u64 correction) +{ + const struct sja1105_regs *regs = priv->info->regs; + u32 ptpclkcorp = ns_to_sja1105_ticks(correction); + + return sja1105_xfer_u32(priv, SPI_WRITE, regs->ptpclkcorp, + &ptpclkcorp, NULL); +} + +/* Write to PTPSCHTM */ +static int sja1105_tas_set_base_time(struct sja1105_private *priv, + u64 base_time) +{ + const struct sja1105_regs *regs = priv->info->regs; + u64 ptpschtm = ns_to_sja1105_ticks(base_time); + + return sja1105_xfer_u64(priv, SPI_WRITE, regs->ptpschtm, + &ptpschtm, NULL); +} + +static int sja1105_tas_start(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct sja1105_ptp_cmd *cmd = &priv->ptp_data.cmd; + struct dsa_switch *ds = priv->ds; + int rc; + + dev_dbg(ds->dev, "Starting the TAS\n"); + + if (tas_data->state == SJA1105_TAS_STATE_ENABLED_NOT_RUNNING || + tas_data->state == SJA1105_TAS_STATE_RUNNING) { + dev_err(ds->dev, "TAS already started\n"); + return -EINVAL; + } + + cmd->ptpstrtsch = 1; + cmd->ptpstopsch = 0; + + rc = sja1105_ptp_commit(ds, cmd, SPI_WRITE); + if (rc < 0) + return rc; + + tas_data->state = SJA1105_TAS_STATE_ENABLED_NOT_RUNNING; + + return 0; +} + +static int sja1105_tas_stop(struct sja1105_private *priv) +{ + struct sja1105_tas_data *tas_data = &priv->tas_data; + struct sja1105_ptp_cmd *cmd = &priv->ptp_data.cmd; + struct dsa_switch *ds = priv->ds; + int rc; + + dev_dbg(ds->dev, "Stopping the TAS\n"); + + if (tas_data->state == SJA1105_TAS_STATE_DISABLED) { + dev_err(ds->dev, "TAS already disabled\n"); + return -EINVAL; + } + + cmd->ptpstopsch = 1; + cmd->ptpstrtsch = 0; + + rc = sja1105_ptp_commit(ds, cmd, SPI_WRITE); + if (rc < 0) + return rc; + + tas_data->state = SJA1105_TAS_STATE_DISABLED; + + return 0; +} + +/* The schedule engine and the PTP clock are driven by the same oscillator, and + * they run in parallel. But whilst the PTP clock can keep an absolute + * time-of-day, the schedule engine is only running in 'ticks' (25 ticks make + * up a delta, which is 200ns), and wrapping around at the end of each cycle. + * The schedule engine is started when the PTP clock reaches the PTPSCHTM time + * (in PTP domain). + * Because the PTP clock can be rate-corrected (accelerated or slowed down) by + * a software servo, and the schedule engine clock runs in parallel to the PTP + * clock, there is logic internal to the switch that periodically keeps the + * schedule engine from drifting away. The frequency with which this internal + * syntonization happens is the PTP clock correction period (PTPCLKCORP). It is + * a value also in the PTP clock domain, and is also rate-corrected. + * To be precise, during a correction period, there is logic to determine by + * how many scheduler clock ticks has the PTP clock drifted. At the end of each + * correction period/beginning of new one, the length of a delta is shrunk or + * expanded with an integer number of ticks, compared with the typical 25. + * So a delta lasts for 200ns (or 25 ticks) only on average. + * Sometimes it is longer, sometimes it is shorter. The internal syntonization + * logic can adjust for at most 5 ticks each 20 ticks. + * + * The first implication is that you should choose your schedule correction + * period to be an integer multiple of the schedule length. Preferably one. + * In case there are schedules of multiple ports active, then the correction + * period needs to be a multiple of them all. Given the restriction that the + * cycle times have to be multiples of one another anyway, this means the + * correction period can simply be the largest cycle time, hence the current + * choice. This way, the updates are always synchronous to the transmission + * cycle, and therefore predictable. + * + * The second implication is that at the beginning of a correction period, the + * first few deltas will be modulated in time, until the schedule engine is + * properly phase-aligned with the PTP clock. For this reason, you should place + * your best-effort traffic at the beginning of a cycle, and your + * time-triggered traffic afterwards. + * + * The third implication is that once the schedule engine is started, it can + * only adjust for so much drift within a correction period. In the servo you + * can only change the PTPCLKRATE, but not step the clock (PTPCLKADD). If you + * want to do the latter, you need to stop and restart the schedule engine, + * which is what the state machine handles. + */ +static void sja1105_tas_state_machine(struct work_struct *work) +{ + struct sja1105_tas_data *tas_data = work_to_sja1105_tas(work); + struct sja1105_private *priv = tas_to_sja1105(tas_data); + struct sja1105_ptp_data *ptp_data = &priv->ptp_data; + struct timespec64 base_time_ts, now_ts; + struct dsa_switch *ds = priv->ds; + struct timespec64 diff; + s64 base_time, now; + int rc = 0; + + mutex_lock(&ptp_data->lock); + + switch (tas_data->state) { + case SJA1105_TAS_STATE_DISABLED: + /* Can't do anything at all if clock is still being stepped */ + if (tas_data->last_op != SJA1105_PTP_ADJUSTFREQ) + break; + + rc = sja1105_tas_adjust_drift(priv, tas_data->max_cycle_time); + if (rc < 0) + break; + + rc = __sja1105_ptp_gettimex(ds, &now, NULL); + if (rc < 0) + break; + + /* Plan to start the earliest schedule first. The others + * will be started in hardware, by way of their respective + * entry points delta. + * Try our best to avoid fringe cases (race condition between + * ptpschtm and ptpstrtsch) by pushing the oper_base_time at + * least one second in the future from now. This is not ideal, + * but this only needs to buy us time until the + * sja1105_tas_start command below gets executed. + */ + base_time = future_base_time(tas_data->earliest_base_time, + tas_data->max_cycle_time, + now + 1ull * NSEC_PER_SEC); + base_time -= sja1105_delta_to_ns(1); + + rc = sja1105_tas_set_base_time(priv, base_time); + if (rc < 0) + break; + + tas_data->oper_base_time = base_time; + + rc = sja1105_tas_start(priv); + if (rc < 0) + break; + + base_time_ts = ns_to_timespec64(base_time); + now_ts = ns_to_timespec64(now); + + dev_dbg(ds->dev, "OPER base time %lld.%09ld (now %lld.%09ld)\n", + base_time_ts.tv_sec, base_time_ts.tv_nsec, + now_ts.tv_sec, now_ts.tv_nsec); + + break; + + case SJA1105_TAS_STATE_ENABLED_NOT_RUNNING: + if (tas_data->last_op != SJA1105_PTP_ADJUSTFREQ) { + /* Clock was stepped.. bad news for TAS */ + sja1105_tas_stop(priv); + break; + } + + /* Check if TAS has actually started, by comparing the + * scheduled start time with the SJA1105 PTP clock + */ + rc = __sja1105_ptp_gettimex(ds, &now, NULL); + if (rc < 0) + break; + + if (now < tas_data->oper_base_time) { + /* TAS has not started yet */ + diff = ns_to_timespec64(tas_data->oper_base_time - now); + dev_dbg(ds->dev, "time to start: [%lld.%09ld]", + diff.tv_sec, diff.tv_nsec); + break; + } + + /* Time elapsed, what happened? */ + rc = sja1105_tas_check_running(priv); + if (rc < 0) + break; + + if (tas_data->state != SJA1105_TAS_STATE_RUNNING) + /* TAS has started */ + dev_err(ds->dev, + "TAS not started despite time elapsed\n"); + + break; + + case SJA1105_TAS_STATE_RUNNING: + /* Clock was stepped.. bad news for TAS */ + if (tas_data->last_op != SJA1105_PTP_ADJUSTFREQ) { + sja1105_tas_stop(priv); + break; + } + + rc = sja1105_tas_check_running(priv); + if (rc < 0) + break; + + if (tas_data->state != SJA1105_TAS_STATE_RUNNING) + dev_err(ds->dev, "TAS surprisingly stopped\n"); + + break; + + default: + if (net_ratelimit()) + dev_err(ds->dev, "TAS in an invalid state (incorrect use of API)!\n"); + } + + if (rc && net_ratelimit()) + dev_err(ds->dev, "An operation returned %d\n", rc); + + mutex_unlock(&ptp_data->lock); +} + +void sja1105_tas_clockstep(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + + if (!tas_data->enabled) + return; + + tas_data->last_op = SJA1105_PTP_CLOCKSTEP; + schedule_work(&tas_data->tas_work); +} + +void sja1105_tas_adjfreq(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + + if (!tas_data->enabled) + return; + + /* No reason to schedule the workqueue, nothing changed */ + if (tas_data->state == SJA1105_TAS_STATE_RUNNING) + return; + + tas_data->last_op = SJA1105_PTP_ADJUSTFREQ; + schedule_work(&tas_data->tas_work); +} + void sja1105_tas_setup(struct dsa_switch *ds) { + struct sja1105_private *priv = ds->priv; + struct sja1105_tas_data *tas_data = &priv->tas_data; + + INIT_WORK(&tas_data->tas_work, sja1105_tas_state_machine); + tas_data->state = SJA1105_TAS_STATE_DISABLED; + tas_data->last_op = SJA1105_PTP_NONE; } void sja1105_tas_teardown(struct dsa_switch *ds) @@ -413,6 +819,8 @@ void sja1105_tas_teardown(struct dsa_switch *ds) struct tc_taprio_qopt_offload *offload; int port; + cancel_work_sync(&priv->tas_data.tas_work); + for (port = 0; port < SJA1105_NUM_PORTS; port++) { offload = priv->tas_data.offload[port]; if (!offload) diff --git a/drivers/net/dsa/sja1105/sja1105_tas.h b/drivers/net/dsa/sja1105/sja1105_tas.h index 0aad212d88b2..b226c3dfd5b1 100644 --- a/drivers/net/dsa/sja1105/sja1105_tas.h +++ b/drivers/net/dsa/sja1105/sja1105_tas.h @@ -8,8 +8,27 @@ #if IS_ENABLED(CONFIG_NET_DSA_SJA1105_TAS) +enum sja1105_tas_state { + SJA1105_TAS_STATE_DISABLED, + SJA1105_TAS_STATE_ENABLED_NOT_RUNNING, + SJA1105_TAS_STATE_RUNNING, +}; + +enum sja1105_ptp_op { + SJA1105_PTP_NONE, + SJA1105_PTP_CLOCKSTEP, + SJA1105_PTP_ADJUSTFREQ, +}; + struct sja1105_tas_data { struct tc_taprio_qopt_offload *offload[SJA1105_NUM_PORTS]; + enum sja1105_tas_state state; + enum sja1105_ptp_op last_op; + struct work_struct tas_work; + s64 earliest_base_time; + s64 oper_base_time; + u64 max_cycle_time; + bool enabled; }; int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port, @@ -19,6 +38,10 @@ void sja1105_tas_setup(struct dsa_switch *ds); void sja1105_tas_teardown(struct dsa_switch *ds); +void sja1105_tas_clockstep(struct dsa_switch *ds); + +void sja1105_tas_adjfreq(struct dsa_switch *ds); + #else /* C doesn't allow empty structures, bah! */ @@ -36,6 +59,10 @@ static inline void sja1105_tas_setup(struct dsa_switch *ds) { } static inline void sja1105_tas_teardown(struct dsa_switch *ds) { } +static inline void sja1105_tas_clockstep(struct dsa_switch *ds) { } + +static inline void sja1105_tas_adjfreq(struct dsa_switch *ds) { } + #endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_TAS) */ #endif /* _SJA1105_TAS_H */