powerpc fixes for 4.11 #7

Headed to stable:
  - disable HFSCR[TM] if TM is not supported, fixes a potential host kernel crash
    triggered by a hostile guest, but only in configurations that no one uses
  - don't try to fix up misaligned load-with-reservation instructions
  - fix flush_(d|i)cache_range() called from modules on little endian kernels
  - add missing global TLB invalidate if cxl is active
  - fix missing preempt_disable() in crc32c-vpmsum
 
 And a fix for selftests build changes that went in this release:
  - selftests/powerpc: Fix standalone powerpc build
 
 Thanks to:
   Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran, Paul Mackerras.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY6LIKAAoJEFHr6jzI4aWAhfcQAKORHx/tJf9w8KqcfSfKfeEL
 O8cZEl5/N3ArNXVM5J5QK5KnMVHnoWWR3FWYwntOjt3RJywjJYJ02YvhOVvt4q+M
 YinRS34KzAhnT1f526zx97v0BGqi//UJamrcFBUBTd4rLuHGbol7fdtWHVrsMYa0
 KWQ+ooPLEpGDk4I3sDz37yeJBQXVpyhC/UF8vzHpvHGPvIQ8Dw8rfWwOZ0HooJuZ
 ewKdkeIsYF8SrM461c1GhOI0VXB0q+CMn9mzIaEKMuZMhHDKyiaM5rm8mWXapzcT
 HsCQKlF9X9YHAbhbSbz9DGvNCEYaW7T4vnudSNHjQaAJlA4HsmeRwWXy4+zqZuPc
 rIbRIFZAyV3wYowN7j3P6Se3lLBDMmlHZvVkygJnwoaR4rmoujePGwdAv8ZH4Udn
 hrbieC41HKVxcm5t3whIDOcHmxaAo1MDqmrVhyxJSjgnkdBtN/gnZXvHDb0VeOJV
 9wFGGE8WvMXnTKEcjM2l+a14CuOrV/wRbHQ1B1O0Kfk613cPrukMYab6eLPqyJzF
 lmkCm1o46bib5oBOmvlqK+5oVuwNyfHmJSzvL+VOylhLVbJPmFJUhHQFssCvsTUf
 k36ZAUxH4fbz1TzAPipXl+wrkE/yzthGmA9FTC9hLkYE/rzvrZt9IKowFw1mq5n/
 2zFabXQBl5JBQ4hdL54f
 =bTuf
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.11:

  Headed to stable:

   - disable HFSCR[TM] if TM is not supported, fixes a potential host
     kernel crash triggered by a hostile guest, but only in
     configurations that no one uses

   - don't try to fix up misaligned load-with-reservation instructions

   - fix flush_(d|i)cache_range() called from modules on little endian
     kernels

   - add missing global TLB invalidate if cxl is active

   - fix missing preempt_disable() in crc32c-vpmsum

  And a fix for selftests build changes that went in this release:

   - selftests/powerpc: Fix standalone powerpc build

  Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
  Paul Mackerras"

* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
  powerpc/mm: Add missing global TLB invalidate if cxl is active
  powerpc/64: Fix flush_(d|i)cache_range() called from modules
  powerpc: Don't try to fix up misaligned load-with-reservation instructions
  powerpc: Disable HFSCR[TM] if TM is not supported
  selftests/powerpc: Fix standalone powerpc build

arch/powerpc/crypto/crc32c-vpmsum_glue.c

@@ -33,10 +33,13 @@ static u32 crc32c_vpmsum(u32 crc, unsigned char const *p, size_t len)
 	}
 
 	if (len & ~VMX_ALIGN_MASK) {
+		preempt_disable();
 		pagefault_disable();
 		enable_kernel_altivec();
 		crc = __crc32c_vpmsum(crc, p, len & ~VMX_ALIGN_MASK);
+		disable_kernel_altivec();
 		pagefault_enable();
+		preempt_enable();
 	}
 
 	tail = len & VMX_ALIGN_MASK;

arch/powerpc/kernel/align.c

@@ -807,14 +807,25 @@ int fix_alignment(struct pt_regs *regs)
 	nb = aligninfo[instr].len;
 	flags = aligninfo[instr].flags;
 
-	/* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
-	if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
-		nb = 8;
-		flags = LD+SW;
-	} else if (IS_XFORM(instruction) &&
-		   ((instruction >> 1) & 0x3ff) == 660) {
-		nb = 8;
-		flags = ST+SW;
+	/*
+	 * Handle some cases which give overlaps in the DSISR values.
+	 */
+	if (IS_XFORM(instruction)) {
+		switch (get_xop(instruction)) {
+		case 532:	/* ldbrx */
+			nb = 8;
+			flags = LD+SW;
+			break;
+		case 660:	/* stdbrx */
+			nb = 8;
+			flags = ST+SW;
+			break;
+		case 20:	/* lwarx */
+		case 84:	/* ldarx */
+		case 116:	/* lharx */
+		case 276:	/* lqarx */
+			return 0;	/* not emulated ever */
+		}
 	}
 
 	/* Byteswap little endian loads and stores */

arch/powerpc/kernel/misc_64.S

@@ -67,7 +67,7 @@ PPC64_CACHES:
  *   flush all bytes from start through stop-1 inclusive
  */
 
-_GLOBAL(flush_icache_range)
+_GLOBAL_TOC(flush_icache_range)
 BEGIN_FTR_SECTION
 	PURGE_PREFETCHED_INS
 	blr
@@ -120,7 +120,7 @@ EXPORT_SYMBOL(flush_icache_range)
  *
  *    flush all bytes from start to stop-1 inclusive
  */
-_GLOBAL(flush_dcache_range)
+_GLOBAL_TOC(flush_dcache_range)
 
 /*
  * Flush the data cache to memory 

arch/powerpc/kernel/setup_64.c

@@ -236,6 +236,15 @@ static void cpu_ready_for_interrupts(void)
 		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
 	}
 
+	/*
+	 * Fixup HFSCR:TM based on CPU features. The bit is set by our
+	 * early asm init because at that point we haven't updated our
+	 * CPU features from firmware and device-tree. Here we have,
+	 * so let's do it.
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE) && !cpu_has_feature(CPU_FTR_TM_COMP))
+		mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
+
 	/* Set IR and DR in PACA MSR */
 	get_paca()->kernel_msr = MSR_KERNEL;
 }

arch/powerpc/mm/hash_native_64.c

@@ -638,6 +638,10 @@ static void native_flush_hash_range(unsigned long number, int local)
 	unsigned long psize = batch->psize;
 	int ssize = batch->ssize;
 	int i;
+	unsigned int use_local;
+
+	use_local = local && mmu_has_feature(MMU_FTR_TLBIEL) &&
+		mmu_psize_defs[psize].tlbiel && !cxl_ctx_in_use();
 
 	local_irq_save(flags);
 
@@ -667,8 +671,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		} pte_iterate_hashed_end();
 	}
 
-	if (mmu_has_feature(MMU_FTR_TLBIEL) &&
-	    mmu_psize_defs[psize].tlbiel && local) {
+	if (use_local) {
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
 			vpn = batch->vpn[i];

tools/testing/selftests/powerpc/Makefile

@@ -34,34 +34,34 @@ endif
 all: $(SUB_DIRS)
 
 $(SUB_DIRS):
-	BUILD_TARGET=$$OUTPUT/$@; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $@ all
+	BUILD_TARGET=$(OUTPUT)/$@; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $@ all
 
 include ../lib.mk
 
 override define RUN_TESTS
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
 	done;
 endef
 
 override define INSTALL_RULE
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install;\
 	done;
 endef
 
 override define EMIT_TESTS
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests;\
 	done;
 endef
 
 clean:
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean; \
 	done;
 	rm -f tags