AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Browse Source 
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata-rb532-cf: remove set_irq_type from finish_io
  [libata] pata_via: support VX855, future chips whose IDE controller use 0x0571
  sata_mv: no longer experimental (v2)
  sata_mv: msi masking fix (v2)
  sata_mv: Properly initialize main irq mask
  sata_mv: remove bogus nsect restriction
  sata_mv: don't read hc_irq_cause
  sata_mv: fix 8-port timeouts on 508x/6081 chips
  sata_nv: fix MCP5x reset
  sata_nv: rename nv_nf2_hardreset()
  libata: set NODEV_HINT for 0x7f status
  libata-sff: fix incorrect EH message
This commit is contained in:
Linus Torvalds 2009-01-27 07:47:22 -08:00
commit 8c022fdd5f
8 changed files with 104 additions and 68 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

0
arch/arm/mach-integrator/clock.h
View File

6
drivers/ata/Kconfig
View File

@ -112,11 +112,11 @@ config ATA_PIIX
If unsure, say N.
config SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
depends on EXPERIMENTAL
tristate "Marvell SATA support"
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] chips.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
as well as the newer [67]042 PCI-X/PCIe and SOC devices.
If unsure, say N.

12
drivers/ata/libata-sff.c
View File

@ -1322,7 +1322,7 @@ int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
* condition. Mark hint.
*/
ata_ehi_push_desc(ehi, "ST-ATA: "
"DRQ=1 with device error, "
"DRQ=0 without device error, "
"dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
@ -1358,6 +1358,16 @@ int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
qc->err_mask |= AC_ERR_HSM;
}
/* There are oddball controllers with
* status register stuck at 0x7f and
* lbal/m/h at zero which makes it
* pass all other presence detection
* mechanisms we have. Set NODEV_HINT
* for it. Kernel bz#7241.
*/
if (status == 0x7f)
qc->err_mask |= AC_ERR_NODEV_HINT;
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
* is changed after ata_pio_sectors().

2
drivers/ata/pata_rb532_cf.c
View File

@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
ata_sff_sync might be sufficient. */
ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
static void rb532_pata_exec_command(struct ata_port *ap,

22
drivers/ata/pata_via.c
View File

@ -86,6 +86,10 @@ enum {
VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */
};
enum {
VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
};
/*
* VIA SouthBridge chips.
*/
@ -97,8 +101,12 @@ static const struct via_isa_bridge {
u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
{ "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f,
VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 |
VIA_BAD_AST | VIA_SATA_PATA },
{ "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f,
VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@ -122,6 +130,8 @@ static const struct via_isa_bridge {
{ "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
{ "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
{ "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
{ "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f,
VIA_UDMA_133 | VIA_BAD_AST },
{ NULL }
};
@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static int printed_version;
u8 enable;
u32 timing;
unsigned long flags = id->driver_data;
int rc;
if (!printed_version++)
@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
if (flags & VIA_IDFLAG_SINGLE)
ppi[1] = &ata_dummy_port_info;
/* To find out how the IDE will behave and what features we
actually have to look at the bridge not the IDE controller */
for (config = via_isa_bridges; config->id; config++)
for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
config++)
if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_dev_put(isa);
}
if (!config->id) {
printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
return -ENODEV;
}
pci_dev_put(isa);
if (!(config->flags & VIA_NO_ENABLES)) {
@ -587,6 +598,7 @@ static const struct pci_device_id via[] = {
{ PCI_VDEVICE(VIA, 0x1571), },
{ PCI_VDEVICE(VIA, 0x3164), },
{ PCI_VDEVICE(VIA, 0x5324), },
{ PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
{ },
};

56
drivers/ata/sata_mv.c
View File

@ -33,10 +33,6 @@
*
* --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
*
* --> Investigate problems with PCI Message Signalled Interrupts (MSI).
*
* --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
*
* --> Develop a low-power-consumption strategy, and implement it.
*
* --> [Experiment, low priority] Investigate interrupt coalescing.
@ -72,7 +68,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
#define DRV_VERSION "1.24"
#define DRV_VERSION "1.25"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@ -351,8 +347,6 @@ enum {
EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
MV_HP_ERRATA_50XXB0 = (1 << 1),
@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
struct mv_host_priv *hpriv = ap->host->private_data;
int hardport = mv_hardport_from_port(ap->port_no);
void __iomem *hc_mmio = mv_hc_base_from_port(
mv_host_base(ap->host), hardport);
u32 hc_irq_cause, ipending;
mv_host_base(ap->host), ap->port_no);
u32 hc_irq_cause;
/* clear EDMA event indicators, if any */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* clear EDMA interrupt indicator, if any */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
ipending = (DEV_IRQ | DMA_IRQ) << hardport;
if (hc_irq_cause & ipending) {
writelfl(hc_irq_cause & ~ipending,
hc_mmio + HC_IRQ_CAUSE_OFS);
}
/* clear pending irq events */
hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
mv_edma_cfg(ap, want_ncq);
@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev)
*
* Gen-II does not support NCQ over a port multiplier
* (no FIS-based switching).
*
* We don't have hob_nsect when doing NCQ commands on Gen-II.
* See mv_qc_prep() for more info.
*/
if (adev->flags & ATA_DFLAG_NCQ) {
if (sata_pmp_attached(adev->link->ap)) {
adev->flags &= ~ATA_DFLAG_NCQ;
ata_dev_printk(adev, KERN_INFO,
"NCQ disabled for command-based switching\n");
} else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
ata_dev_printk(adev, KERN_INFO,
"max_sectors limited to %u for NCQ\n",
adev->max_sectors);
}
}
}
@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
* only 11 bytes...so we must pick and choose required
* registers based on the command. So, we drop feature and
* hob_feature for [RW] DMA commands, but they are needed for
* NCQ. NCQ will drop hob_nsect.
* NCQ. NCQ will drop hob_nsect, which is not needed there
* (nsect is used only for the tag; feat/hob_feat hold true nsect).
*/
switch (tf->command) {
case ATA_CMD_READ:
@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
struct ata_host *host = dev_instance;
struct mv_host_priv *hpriv = host->private_data;
unsigned int handled = 0;
int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
u32 main_irq_cause, pending_irqs;
spin_lock(&host->lock);
/* for MSI: block new interrupts while in here */
if (using_msi)
writel(0, hpriv->main_irq_mask_addr);
main_irq_cause = readl(hpriv->main_irq_cause_addr);
pending_irqs = main_irq_cause & hpriv->main_irq_mask;
/*
@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
handled = mv_host_intr(host, pending_irqs);
}
spin_unlock(&host->lock);
/* for MSI: unmask; interrupt cause bits will retrigger now */
if (using_msi)
writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
return IRQ_RETVAL(handled);
}
@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap)
writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* clear pending irq events */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
mv_enable_port_irqs(ap, ERR_IRQ);
@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
/* initialize shadow irq mask with register's value */
hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
/* global interrupt mask: 0 == mask everything */
mv_set_main_irq_mask(host, ~0, 0);
@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev,
if (rc)
return rc;
/* Enable interrupts */
if (msi && pci_enable_msi(pdev))
pci_intx(pdev, 1);
/* Enable message-switched interrupts, if requested */
if (msi && pci_enable_msi(pdev) == 0)
hpriv->hp_flags |= MV_HP_FLAG_MSI;
mv_dump_pci_cfg(pdev, 0x68);
mv_print_info(host);

70
drivers/ata/sata_nv.c
View File

@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static int nv_adma_slave_config(struct scsi_device *sdev);
@ -352,6 +352,7 @@ enum nv_host_type
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
CK804,
ADMA,
MCP5x,
SWNCQ,
};
@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
@ -432,7 +433,7 @@ static struct ata_port_operations nv_nf2_ops = {
.inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
.hardreset = nv_nf2_hardreset,
.hardreset = nv_noclassify_hardreset,
};
/* CK804 finally gets hardreset right */
@ -467,8 +468,19 @@ static struct ata_port_operations nv_adma_ops = {
.host_stop = nv_adma_host_stop,
};
/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
* work, hardreset should be used and hardreset can't report proper
* signature, which suggests that mcp5x is closer to nf2 as long as
* reset quirkiness is concerned. Define separate ops for mcp5x with
* nv_noclassify_hardreset().
*/
static struct ata_port_operations nv_mcp5x_ops = {
.inherits = &nv_common_ops,
.hardreset = nv_noclassify_hardreset,
};
static struct ata_port_operations nv_swncq_ops = {
.inherits = &nv_generic_ops,
.inherits = &nv_mcp5x_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
@ -531,6 +543,15 @@ static const struct ata_port_info nv_port_info[] = {
.port_ops = &nv_adma_ops,
.private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
},
/* MCP5x */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_mcp5x_ops,
.private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
},
/* SWNCQ */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@ -1530,6 +1551,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
return 0;
}
static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
bool online;
int rc;
rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
&online, NULL);
return online ? -EAGAIN : rc;
}
static void nv_nf2_freeze(struct ata_port *ap)
{
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
@ -1554,17 +1586,6 @@ static void nv_nf2_thaw(struct ata_port *ap)
iowrite8(mask, scr_addr + NV_INT_ENABLE);
}
static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
bool online;
int rc;
rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
&online, NULL);
return online ? -EAGAIN : rc;
}
static void nv_ck804_freeze(struct ata_port *ap)
{
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@ -2355,14 +2376,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (type == CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
type = ADMA;
}
if (type == SWNCQ) {
if (swncq_enabled)
dev_printk(KERN_NOTICE, &pdev->dev,
"Using SWNCQ mode\n");
else
type = GENERIC;
} else if (type == MCP5x && swncq_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
type = SWNCQ;
}
ppi[0] = &nv_port_info[type];

4
include/linux/pci_ids.h
View File

@ -1357,6 +1357,7 @@
#define PCI_DEVICE_ID_VIA_8783_0 0x3208
#define PCI_DEVICE_ID_VIA_8237 0x3227
#define PCI_DEVICE_ID_VIA_8251 0x3287
#define PCI_DEVICE_ID_VIA_8261 0x3402
#define PCI_DEVICE_ID_VIA_8237A 0x3337
#define PCI_DEVICE_ID_VIA_8237S 0x3372
#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324
@ -1366,10 +1367,13 @@
#define PCI_DEVICE_ID_VIA_CX700 0x8324
#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581
#define PCI_DEVICE_ID_VIA_VX800 0x8353
#define PCI_DEVICE_ID_VIA_VX855 0x8409
#define PCI_DEVICE_ID_VIA_8371_1 0x8391
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409
#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102