AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

spi: clps711x: Add support for 1-8 BPW transfers

Browse Source 
This patch adds support for 1 to 8 BPW to driver and removes
excess BPW validation since this is already checked by SPI core.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Alexander Shiyan 2014-02-02 10:59:49 +04:00 committed by Mark Brown
parent c7a26f121d
commit 8dda9d9a48
1 changed files with 16 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
drivers/spi/spi-clps711x.c
View File

@ -32,6 +32,7 @@ struct spi_clps711x_data {
u8 *tx_buf;
u8 *rx_buf;
unsigned int bpw;
int len;
int chipselect[0];
@ -57,18 +58,12 @@ static void spi_clps711x_setup_mode(struct spi_device *spi)
clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCKNSEN, SYSCON3);
}
static int spi_clps711x_setup_xfer(struct spi_device *spi,
static void spi_clps711x_setup_xfer(struct spi_device *spi,
struct spi_transfer *xfer)
{
u32 speed = xfer->speed_hz ? : spi->max_speed_hz;
u8 bpw = xfer->bits_per_word;
struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
if (bpw != 8) {
dev_err(&spi->dev, "Unsupported master bus width %i\n", bpw);
return -EINVAL;
}
/* Setup SPI frequency divider */
if (!speed || (speed >= hw->max_speed_hz))
clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
@ -82,38 +77,36 @@ static int spi_clps711x_setup_xfer(struct spi_device *spi,
else
clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
SYSCON1_ADCKSEL(0), SYSCON1);
return 0;
}
static int spi_clps711x_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
struct spi_device *spi = msg->spi;
struct spi_transfer *xfer;
int status = 0, cs = hw->chipselect[msg->spi->chip_select];
int cs = hw->chipselect[spi->chip_select];
spi_clps711x_setup_mode(msg->spi);
spi_clps711x_setup_mode(spi);
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
u8 data;
if (spi_clps711x_setup_xfer(msg->spi, xfer)) {
status = -EINVAL;
goto out_xfr;
}
spi_clps711x_setup_xfer(spi, xfer);
gpio_set_value(cs, !!(msg->spi->mode & SPI_CS_HIGH));
gpio_set_value(cs, !!(spi->mode & SPI_CS_HIGH));
reinit_completion(&hw->done);
hw->len = xfer->len;
hw->bpw = xfer->bits_per_word ? : spi->bits_per_word;
hw->tx_buf = (u8 *)xfer->tx_buf;
hw->rx_buf = (u8 *)xfer->rx_buf;
/* Initiate transfer */
data = hw->tx_buf ? *hw->tx_buf++ : 0;
clps_writel(data | SYNCIO_FRMLEN(8) | SYNCIO_TXFRMEN, SYNCIO);
clps_writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
SYNCIO);
wait_for_completion(&hw->done);
@ -122,13 +115,12 @@ static int spi_clps711x_transfer_one_message(struct spi_master *master,
if (xfer->cs_change ||
list_is_last(&xfer->transfer_list, &msg->transfers))
gpio_set_value(cs, !(msg->spi->mode & SPI_CS_HIGH));
gpio_set_value(cs, !(spi->mode & SPI_CS_HIGH));
msg->actual_length += xfer->len;
}
out_xfr:
msg->status = status;
msg->status = 0;
spi_finalize_current_message(master);
return 0;
@ -147,7 +139,8 @@ static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
/* Handle TX */
if (--hw->len > 0) {
data = hw->tx_buf ? *hw->tx_buf++ : 0;
clps_writel(data | SYNCIO_FRMLEN(8) | SYNCIO_TXFRMEN, SYNCIO);
clps_writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
SYNCIO);
} else
complete(&hw->done);
@ -181,7 +174,7 @@ static int spi_clps711x_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8);
master->num_chipselect = pdata->num_chipselect;
master->setup = spi_clps711x_setup;
master->transfer_one_message = spi_clps711x_transfer_one_message;