forked from luck/tmp_suning_uos_patched
omapfb: add support for the ZOOM MDK LCD
Add glue to control the OMAP_LDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Patch updated for mainline kernel. Note that the drivers/video/omap should be updated to pass omap_lcd_config in platform_data. The patch should also be updated to compile if twl4030 is not selected, and eventually to use the regulator framework. Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Stanley.Miao
Linus Torvalds
parent
be481941c6
commit
8fea8844a7
@ -690,6 +690,7 @@ CONFIG_GPIOLIB=y
|
||||
# CONFIG_GPIO_MAX732X is not set
|
||||
# CONFIG_GPIO_PCA953X is not set
|
||||
# CONFIG_GPIO_PCF857X is not set
|
||||
CONFIG_GPIO_TWL4030=y
|
||||
|
||||
#
|
||||
# PCI GPIO expanders:
|
||||
@ -742,6 +743,7 @@ CONFIG_SSB_POSSIBLE=y
|
||||
# CONFIG_MFD_SM501 is not set
|
||||
# CONFIG_HTC_EGPIO is not set
|
||||
# CONFIG_HTC_PASIC3 is not set
|
||||
CONFIG_TWL4030_CORE=y
|
||||
# CONFIG_MFD_TMIO is not set
|
||||
# CONFIG_MFD_T7L66XB is not set
|
||||
# CONFIG_MFD_TC6387XB is not set
|
||||
@ -767,8 +769,46 @@ CONFIG_DAB=y
|
||||
#
|
||||
# CONFIG_VGASTATE is not set
|
||||
CONFIG_VIDEO_OUTPUT_CONTROL=m
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
CONFIG_FB=y
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
# CONFIG_FB_DDC is not set
|
||||
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
||||
# CONFIG_FB_SYS_FILLRECT is not set
|
||||
# CONFIG_FB_SYS_COPYAREA is not set
|
||||
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
||||
# CONFIG_FB_FOREIGN_ENDIAN is not set
|
||||
# CONFIG_FB_SYS_FOPS is not set
|
||||
# CONFIG_FB_SVGALIB is not set
|
||||
# CONFIG_FB_MACMODES is not set
|
||||
# CONFIG_FB_BACKLIGHT is not set
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_TILEBLITTING=y
|
||||
|
||||
#
|
||||
# Frame buffer hardware drivers
|
||||
#
|
||||
# CONFIG_FB_S1D13XXX is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
# CONFIG_FB_METRONOME is not set
|
||||
CONFIG_FB_OMAP=y
|
||||
CONFIG_FB_OMAP_LCD_VGA=y
|
||||
# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
|
||||
# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
|
||||
CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
# CONFIG_LCD_LTV350QV is not set
|
||||
# CONFIG_LCD_ILI9320 is not set
|
||||
# CONFIG_LCD_TDO24M is not set
|
||||
# CONFIG_LCD_VGG2432A4 is not set
|
||||
CONFIG_LCD_PLATFORM=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_CORGI is not set
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
@ -780,6 +820,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||
# CONFIG_FONTS is not set
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_8x16=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_LOGO_LINUX_MONO=y
|
||||
CONFIG_LOGO_LINUX_VGA16=y
|
||||
CONFIG_LOGO_LINUX_CLUT224=y
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
# CONFIG_SND_SEQUENCER is not set
|
||||
|
||||
@ -7,6 +7,10 @@ config FB_OMAP
|
||||
help
|
||||
Frame buffer driver for OMAP based boards.
|
||||
|
||||
config FB_OMAP_LCD_VGA
|
||||
bool "Use LCD in VGA mode"
|
||||
depends on MACH_OMAP_3430SDP || MACH_OMAP_LDP
|
||||
|
||||
choice
|
||||
depends on FB_OMAP && MACH_OVERO
|
||||
prompt "Screen resolution"
|
||||
|
||||
@ -29,6 +29,7 @@ objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
|
||||
objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
|
||||
objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
|
||||
objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
|
||||
objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o
|
||||
objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o
|
||||
objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
|
||||
objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
|
||||
|
||||
200
drivers/video/omap/lcd_ldp.c
Normal file
200
drivers/video/omap/lcd_ldp.c
Normal file
@ -0,0 +1,200 @@
|
||||
/*
|
||||
* LCD panel support for the TI LDP board
|
||||
*
|
||||
* Copyright (C) 2007 WindRiver
|
||||
* Author: Stanley Miao <stanley.miao@windriver.com>
|
||||
*
|
||||
* Derived from drivers/video/omap/lcd-2430sdp.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c/twl4030.h>
|
||||
|
||||
#include <mach/gpio.h>
|
||||
#include <mach/mux.h>
|
||||
#include <mach/omapfb.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES)
|
||||
#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
|
||||
|
||||
#define LCD_PANEL_RESET_GPIO 55
|
||||
#define LCD_PANEL_QVGA_GPIO 56
|
||||
|
||||
#ifdef CONFIG_FB_OMAP_LCD_VGA
|
||||
#define LCD_XRES 480
|
||||
#define LCD_YRES 640
|
||||
#define LCD_PIXCLOCK_MAX 41700
|
||||
#else
|
||||
#define LCD_XRES 240
|
||||
#define LCD_YRES 320
|
||||
#define LCD_PIXCLOCK_MAX 185186
|
||||
#endif
|
||||
|
||||
#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
|
||||
#define ENABLE_VAUX2_DEDICATED 0x09
|
||||
#define ENABLE_VAUX2_DEV_GRP 0x20
|
||||
#define ENABLE_VAUX3_DEDICATED 0x03
|
||||
#define ENABLE_VAUX3_DEV_GRP 0x20
|
||||
|
||||
#define ENABLE_VPLL2_DEDICATED 0x05
|
||||
#define ENABLE_VPLL2_DEV_GRP 0xE0
|
||||
#define TWL4030_VPLL2_DEV_GRP 0x33
|
||||
#define TWL4030_VPLL2_DEDICATED 0x36
|
||||
|
||||
#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
|
||||
|
||||
|
||||
static int ldp_panel_init(struct lcd_panel *panel,
|
||||
struct omapfb_device *fbdev)
|
||||
{
|
||||
gpio_request(LCD_PANEL_RESET_GPIO, "lcd reset");
|
||||
gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga");
|
||||
gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd panel");
|
||||
gpio_request(LCD_PANEL_BACKLIGHT_GPIO, "lcd backlight");
|
||||
|
||||
gpio_direction_output(LCD_PANEL_QVGA_GPIO, 0);
|
||||
gpio_direction_output(LCD_PANEL_RESET_GPIO, 0);
|
||||
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
|
||||
gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
|
||||
|
||||
#ifdef CONFIG_FB_OMAP_LCD_VGA
|
||||
gpio_set_value(LCD_PANEL_QVGA_GPIO, 0);
|
||||
#else
|
||||
gpio_set_value(LCD_PANEL_QVGA_GPIO, 1);
|
||||
#endif
|
||||
gpio_set_value(LCD_PANEL_RESET_GPIO, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ldp_panel_cleanup(struct lcd_panel *panel)
|
||||
{
|
||||
gpio_free(LCD_PANEL_BACKLIGHT_GPIO);
|
||||
gpio_free(LCD_PANEL_ENABLE_GPIO);
|
||||
gpio_free(LCD_PANEL_QVGA_GPIO);
|
||||
gpio_free(LCD_PANEL_RESET_GPIO);
|
||||
}
|
||||
|
||||
static int ldp_panel_enable(struct lcd_panel *panel)
|
||||
{
|
||||
if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
|
||||
TWL4030_VPLL2_DEDICATED))
|
||||
return -EIO;
|
||||
if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
|
||||
TWL4030_VPLL2_DEV_GRP))
|
||||
return -EIO;
|
||||
|
||||
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
|
||||
gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 1);
|
||||
|
||||
if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEDICATED,
|
||||
TWL4030_VAUX3_DEDICATED))
|
||||
return -EIO;
|
||||
if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEV_GRP,
|
||||
TWL4030_VAUX3_DEV_GRP))
|
||||
return -EIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ldp_panel_disable(struct lcd_panel *panel)
|
||||
{
|
||||
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
|
||||
gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
|
||||
|
||||
t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
|
||||
t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
|
||||
msleep(4);
|
||||
}
|
||||
|
||||
static unsigned long ldp_panel_get_caps(struct lcd_panel *panel)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct lcd_panel ldp_panel = {
|
||||
.name = "ldp",
|
||||
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
|
||||
OMAP_LCDC_INV_HSYNC,
|
||||
|
||||
.bpp = 16,
|
||||
.data_lines = 18,
|
||||
.x_res = LCD_XRES,
|
||||
.y_res = LCD_YRES,
|
||||
.hsw = 3, /* hsync_len (4) - 1 */
|
||||
.hfp = 3, /* right_margin (4) - 1 */
|
||||
.hbp = 39, /* left_margin (40) - 1 */
|
||||
.vsw = 1, /* vsync_len (2) - 1 */
|
||||
.vfp = 2, /* lower_margin */
|
||||
.vbp = 7, /* upper_margin (8) - 1 */
|
||||
|
||||
.pixel_clock = LCD_PIXCLOCK_MAX,
|
||||
|
||||
.init = ldp_panel_init,
|
||||
.cleanup = ldp_panel_cleanup,
|
||||
.enable = ldp_panel_enable,
|
||||
.disable = ldp_panel_disable,
|
||||
.get_caps = ldp_panel_get_caps,
|
||||
};
|
||||
|
||||
static int ldp_panel_probe(struct platform_device *pdev)
|
||||
{
|
||||
omapfb_register_panel(&ldp_panel);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ldp_panel_remove(struct platform_device *pdev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ldp_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ldp_panel_resume(struct platform_device *pdev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct platform_driver ldp_panel_driver = {
|
||||
.probe = ldp_panel_probe,
|
||||
.remove = ldp_panel_remove,
|
||||
.suspend = ldp_panel_suspend,
|
||||
.resume = ldp_panel_resume,
|
||||
.driver = {
|
||||
.name = "ldp_lcd",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ldp_panel_drv_init(void)
|
||||
{
|
||||
return platform_driver_register(&ldp_panel_driver);
|
||||
}
|
||||
|
||||
static void __exit ldp_panel_drv_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ldp_panel_driver);
|
||||
}
|
||||
|
||||
module_init(ldp_panel_drv_init);
|
||||
module_exit(ldp_panel_drv_exit);
|
||||
Loading…
Reference in New Issue
Block a user