sparc: Delete bare sbus char bpp driver, obsoleted by parport_sunbpp

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2008-08-26 22:25:03 -07:00
parent 51e0f004a9
commit 902663f6ea
8 changed files with 0 additions and 1141 deletions

View File

@ -22,7 +22,6 @@ header-y += unistd_64.h
header-y += apc.h
header-y += asi.h
header-y += bpp.h
header-y += display7seg.h
header-y += envctrl.h
header-y += fbio.h

View File

@ -1,73 +0,0 @@
#ifndef _SPARC_BPP_H
#define _SPARC_BPP_H
/*
* Copyright (c) 1995 Picture Elements
* Stephen Williams
* Gus Baldauf
*
* Linux/SPARC port by Peter Zaitcev.
* Integration into SPARC tree by Tom Dyas.
*/
#include <linux/ioctl.h>
/*
* This is a driver that supports IEEE Std 1284-1994 communications
* with compliant or compatible devices. It will use whatever features
* the device supports, prefering those that are typically faster.
*
* When the device is opened, it is left in COMPATIBILITY mode, and
* writes work like any printer device. The driver only attempt to
* negotiate 1284 modes when needed so that plugs can be pulled,
* switch boxes switched, etc., without disrupting things. It will
* also leave the device in compatibility mode when closed.
*/
/*
* This driver also supplies ioctls to manually manipulate the
* pins. This is great for testing devices, or writing code to deal
* with bizzarro-mode of the ACME Special TurboThingy Plus.
*
* NOTE: These ioctl currently do not interact well with
* read/write. Caveat emptor.
*
* PUT_PINS allows us to assign the sense of all the pins, including
* the data pins if being driven by the host. The GET_PINS returns the
* pins that the peripheral drives, including data if appropriate.
*/
# define BPP_PUT_PINS _IOW('B', 1, int)
# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
# define BPP_PUT_DATA _IOW('B', 3, int)
# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
/*
* Set the data bus to input mode. Disengage the data bin driver and
* be prepared to read values from the peripheral. If the arg is 0,
* then revert the bus to output mode.
*/
# define BPP_SET_INPUT _IOW('B', 5, int)
/*
* These bits apply to the PUT operation...
*/
# define BPP_PP_nStrobe 0x0001
# define BPP_PP_nAutoFd 0x0002
# define BPP_PP_nInit 0x0004
# define BPP_PP_nSelectIn 0x0008
/*
* These apply to the GET operation, which also reads the current value
* of the previously put values. A bit mask of these will be returned
* as a bit mask in the return code of the ioctl().
*/
# define BPP_GP_nAck 0x0100
# define BPP_GP_Busy 0x0200
# define BPP_GP_PError 0x0400
# define BPP_GP_Select 0x0800
# define BPP_GP_nFault 0x1000
#endif

View File

@ -20,7 +20,6 @@
#include <asm/io.h>
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/bpp.h>
struct linux_ebus *ebus_chain = NULL;

View File

@ -21,7 +21,6 @@
#include <asm/ebus.h>
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/bpp.h>
#include <asm/irq.h>
#include <asm/io.h>

View File

@ -30,14 +30,6 @@ config OBP_FLASH
The OpenBoot PROM on Ultra systems is flashable. If you want to be
able to upgrade the OBP firmware, say Y here.
config SUN_BPP
tristate "Bidirectional parallel port support (OBSOLETE)"
depends on EXPERIMENTAL
help
Say Y here to support Sun's obsolete variant of IEEE1284
bidirectional parallel port protocol as /dev/bppX. Can be built on
x86 machines.
config SUN_VIDEOPIX
tristate "Videopix Frame Grabber (EXPERIMENTAL)"
depends on EXPERIMENTAL && (BROKEN || !64BIT)

View File

@ -17,7 +17,6 @@ obj-$(CONFIG_WATCHDOG_RIO) += riowatchdog.o
obj-$(CONFIG_OBP_FLASH) += flash.o
obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o
obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o
obj-$(CONFIG_SUN_BPP) += bpp.o
obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o
obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o
obj-$(CONFIG_SUN_JSFLASH) += jsflash.o

File diff suppressed because it is too large Load Diff

View File

@ -14,7 +14,6 @@
#include <asm/dma.h>
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/bpp.h>
#include <asm/irq.h>
static ssize_t