AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

sh: add support for sh7366 processor

Browse Source 
This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm 2008-02-08 17:31:24 +09:00 committed by Paul Mundt
parent d847afe7d4
commit 9109a30e5a
11 changed files with 215 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/sh/Kconfig
View File

@ -315,6 +315,13 @@ config CPU_SUBTYPE_SH7722
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101

2
arch/sh/Kconfig.debug
View File

@ -30,7 +30,7 @@ config EARLY_SCIF_CONSOLE_PORT
hex
depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
default "0xffe00000" if CPU_SUBTYPE_SH7722
default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263

6
arch/sh/kernel/cpu/sh4/probe.c
View File

@ -132,6 +132,12 @@ int __init detect_cpu_and_cache_system(void)
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
else if (prr == 0x70) {
boot_cpu_data.type = CPU_SH7366;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */

2
arch/sh/kernel/cpu/sh4a/Makefile
View File

@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# SMP setup
@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
obj-y += $(clock-y)

10
arch/sh/kernel/cpu/sh4a/clock-sh7722.c
View File

@ -1,7 +1,7 @@
/*
* arch/sh/kernel/cpu/sh4a/clock-sh7722.c
*
* SH7722 support for the clock framework
* SH7722 & SH7366 support for the clock framework
*
* Copyright (c) 2006-2007 Nomad Global Solutions Inc
* Based on code for sh7343 by Paul Mundt
@ -417,15 +417,19 @@ static int sh7722_siu_which(struct clk *clk)
return 0;
if (!strcmp(clk->name, "siu_b_clk"))
return 1;
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
if (!strcmp(clk->name, "irda_clk"))
return 2;
#endif
return -EINVAL;
}
static unsigned long sh7722_siu_regs[] = {
[0] = SCLKACR,
[1] = SCLKBCR,
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
[2] = IrDACLKCR,
#endif
};
static int sh7722_siu_start_stop(struct clk *clk, int enable)
@ -571,10 +575,12 @@ static struct clk sh7722_siu_b_clock = {
.ops = &sh7722_siu_clk_ops,
};
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
static struct clk sh7722_irda_clock = {
.name = "irda_clk",
.ops = &sh7722_siu_clk_ops,
};
#endif
static struct clk sh7722_video_clock = {
.name = "video_clk",
@ -588,7 +594,9 @@ static struct clk *sh7722_clocks[] = {
&sh7722_sdram_clock,
&sh7722_siu_a_clock,
&sh7722_siu_b_clock,
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
&sh7722_irda_clock,
#endif
&sh7722_video_clock,
};

177
arch/sh/kernel/cpu/sh4a/setup-sh7366.c Normal file
View File

@ -0,0 +1,177 @@
/*
* SH7366 Setup
*
* Copyright (C) 2008 Renesas Solutions
*
* Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7366_devices[] __initdata = {
&sci_device,
};
static int __init sh7366_devices_setup(void)
{
return platform_add_devices(sh7366_devices,
ARRAY_SIZE(sh7366_devices));
}
__initcall(sh7366_devices_setup);
enum {
UNUSED=0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
ICB,
DMAC0, DMAC1, DMAC2, DMAC3,
VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
MFI, VPU, USB,
MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
DMAC4, DMAC5, DMAC_DADERR,
SCIF, SCIFA1, SCIFA2,
DENC, MSIOF,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
SDHI0, SDHI1, SDHI2, SDHI3,
CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
VEU2, LCDC,
/* interrupt groups */
DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
INTC_VECT(ICB, 0x700),
INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
INTC_VECT(MMC_MMC3I, 0xb40),
INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
INTC_VECT(DMAC_DADERR, 0xbc0),
INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
INTC_VECT(SCIFA2, 0xc40),
INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440),
INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ } },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
{ 0, 0, 0, VPU, 0, 0, 0, MFI } },
{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
{ 0, 0, 0, ICB } },
{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
{ 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
{ 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
{ 0, 0, 0, 0, 0, 0, 0, MSIOF } },
{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
{ SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
{ 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
{ 0, 0, 0, 0, 0, 0, 0, TSIF } },
{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
{ 0xa4080008, 0, 16, 4, /* IPRC */ { } },
{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
{ 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
{ 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
{ 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
{ 0xa408002c, 0, 16, 4, /* IPRL */ { } },
{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa414001c, 16, 2, /* ICR1 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
mask_registers, prio_registers, sense_registers);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
void __init plat_mem_setup(void)
{
/* TODO: Register Node 1 */
}

2
arch/sh/kernel/setup.c
View File

@ -333,7 +333,7 @@ static const char *cpu_name[] = {
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_SH_NONE] = "Unknown"
[CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)

2
drivers/serial/sh-sci.c
View File

@ -393,7 +393,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
/* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \

8
drivers/serial/sh-sci.h
View File

@ -97,6 +97,12 @@
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
# define PORT_PSCR 0xA405011E
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@ -577,7 +583,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)

4
include/asm-sh/cpu-sh4/freq.h
View File

@ -10,12 +10,14 @@
#ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
#define FRQCR 0xa4150000
#define VCLKCR 0xa4150004
#define SCLKACR 0xa4150008
#define SCLKBCR 0xa415000c
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#define IrDACLKCR 0xa4150010
#endif
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000

2
include/asm-sh/processor.h
View File

@ -33,7 +33,7 @@ enum cpu_type {
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722,
CPU_SH7343, CPU_SH7722, CPU_SH7366,
/* SH-5 types */
CPU_SH5_101, CPU_SH5_103,