forked from luck/tmp_suning_uos_patched
pinctrl: tegra: add a driver for Tegra210
Tegra210's pinmux supports a different set of pins/options than earlier SoCs, so requires its own driver (well, table of pin-specific data). Cc: devicetree@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
ec654e50c6
commit
9184f75690
|
@ -0,0 +1,166 @@
|
|||
NVIDIA Tegra210 pinmux controller
|
||||
|
||||
Required properties:
|
||||
- compatible: "nvidia,tegra210-pinmux"
|
||||
- reg: Should contain a list of base address and size pairs for:
|
||||
- first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
|
||||
- second entry: The PINMUX_AUX_* registers (pinmux)
|
||||
|
||||
Please refer to pinctrl-bindings.txt in this directory for details of the
|
||||
common pinctrl bindings used by client devices, including the meaning of the
|
||||
phrase "pin configuration node".
|
||||
|
||||
Tegra's pin configuration nodes act as a container for an arbitrary number of
|
||||
subnodes. Each of these subnodes represents some desired configuration for a
|
||||
pin, a group, or a list of pins or groups. This configuration can include the
|
||||
mux function to select on those pin(s)/group(s), and various pin configuration
|
||||
parameters, such as pull-up, tristate, drive strength, etc.
|
||||
|
||||
The name of each subnode is not important; all subnodes should be enumerated
|
||||
and processed purely based on their content.
|
||||
|
||||
Each subnode only affects those parameters that are explicitly listed. In
|
||||
other words, a subnode that lists a mux function but no pin configuration
|
||||
parameters implies no information about any pin configuration parameters.
|
||||
Similarly, a pin subnode that describes a pullup parameter implies no
|
||||
information about e.g. the mux function or tristate parameter. For this
|
||||
reason, even seemingly boolean values are actually tristates in this binding:
|
||||
unspecified, off, or on. Unspecified is represented as an absent property,
|
||||
and off/on are represented as integer values 0 and 1.
|
||||
|
||||
See the TRM to determine which properties and values apply to each pin/group.
|
||||
Macro values for property values are defined in
|
||||
include/dt-binding/pinctrl/pinctrl-tegra.h.
|
||||
|
||||
Required subnode-properties:
|
||||
- nvidia,pins : An array of strings. Each string contains the name of a pin or
|
||||
group. Valid values for these names are listed below.
|
||||
|
||||
Optional subnode-properties:
|
||||
- nvidia,function: A string containing the name of the function to mux to the
|
||||
pin or group.
|
||||
- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
|
||||
0: none, 1: down, 2: up.
|
||||
- nvidia,tristate: Integer.
|
||||
0: drive, 1: tristate.
|
||||
- nvidia,enable-input: Integer. Enable the pin's input path.
|
||||
enable :TEGRA_PIN_ENABLE0 and
|
||||
disable or output only: TEGRA_PIN_DISABLE.
|
||||
- nvidia,open-drain: Integer.
|
||||
enable: TEGRA_PIN_ENABLE.
|
||||
disable: TEGRA_PIN_DISABLE.
|
||||
- nvidia,lock: Integer. Lock the pin configuration against further changes
|
||||
until reset.
|
||||
enable: TEGRA_PIN_ENABLE.
|
||||
disable: TEGRA_PIN_DISABLE.
|
||||
- nvidia,io-hv: Integer. Select high-voltage receivers.
|
||||
normal: TEGRA_PIN_DISABLE
|
||||
high: TEGRA_PIN_ENABLE
|
||||
- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
|
||||
normal: TEGRA_PIN_DISABLE
|
||||
high: TEGRA_PIN_ENABLE
|
||||
- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
|
||||
normal: TEGRA_PIN_DISABLE
|
||||
high: TEGRA_PIN_ENABLE
|
||||
- nvidia,drive-type: Integer. Valid range 0...3.
|
||||
- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
|
||||
The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
|
||||
Tegra TRM.
|
||||
- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
|
||||
The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
|
||||
Tegra TRM.
|
||||
- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
|
||||
fastest. The range of valid values depends on the pingroup. See
|
||||
"DRVDN_SLWR" in the Tegra TRM.
|
||||
- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
|
||||
fastest. The range of valid values depends on the pingroup. See
|
||||
"DRVUP_SLWF" in the Tegra TRM.
|
||||
|
||||
Valid values for pin and group names (nvidia,pin) are:
|
||||
|
||||
Mux groups:
|
||||
|
||||
These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property
|
||||
that exists in those registers may be set for the following pin names.
|
||||
|
||||
In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL
|
||||
register. Where that is true, and property that exists in that register
|
||||
may also be set on the following pin names.
|
||||
|
||||
als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7,
|
||||
aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1,
|
||||
button_power_on_px5, button_slide_sw_py0, button_vol_down_px7,
|
||||
button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1,
|
||||
cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6,
|
||||
cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in,
|
||||
clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
|
||||
dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3,
|
||||
dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4,
|
||||
dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3,
|
||||
dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
|
||||
gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3,
|
||||
gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4,
|
||||
gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck,
|
||||
lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2,
|
||||
lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1,
|
||||
pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
|
||||
pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2,
|
||||
pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4,
|
||||
pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
|
||||
qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
|
||||
sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5,
|
||||
sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0,
|
||||
sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
|
||||
sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3,
|
||||
spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7,
|
||||
spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6,
|
||||
spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
|
||||
touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1,
|
||||
uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0,
|
||||
uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7,
|
||||
uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
|
||||
usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2
|
||||
|
||||
Drive groups:
|
||||
|
||||
These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control)
|
||||
registers. Note that where one of these registers controls a single pin
|
||||
for which a PINMUX_AUX_* exists, see the list above for the pin name to
|
||||
use when configuring the pinmux.
|
||||
|
||||
pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
|
||||
pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4
|
||||
|
||||
Valid values for nvidia,functions are:
|
||||
|
||||
aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb,
|
||||
dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi,
|
||||
i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0,
|
||||
pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
|
||||
sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4,
|
||||
sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4,
|
||||
vgp5, vgp6, vimclk, vimclk2
|
||||
|
||||
Example:
|
||||
|
||||
pinmux: pinmux@70000800 {
|
||||
compatible = "nvidia,tegra210-pinmux";
|
||||
reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */
|
||||
<0x0 0x70003000 0x0 0x1000>; /* Mux registers */
|
||||
|
||||
pinctrl-names = "boot";
|
||||
pinctrl-0 = <&state_boot>;
|
||||
|
||||
state_boot: pinmux {
|
||||
gen1_i2c_scl_pj1 {
|
||||
nvidia,pins = "gen1_i2c_scl_pj1",
|
||||
nvidia,function = "i2c1";
|
||||
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
||||
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
||||
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
||||
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
||||
nvidia,io-hv = <TEGRA_PIN_ENABLE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
|
@ -154,6 +154,10 @@ config PINCTRL_TEGRA124
|
|||
bool
|
||||
select PINCTRL_TEGRA
|
||||
|
||||
config PINCTRL_TEGRA210
|
||||
bool
|
||||
select PINCTRL_TEGRA
|
||||
|
||||
config PINCTRL_TEGRA_XUSB
|
||||
def_bool y if ARCH_TEGRA
|
||||
select GENERIC_PHY
|
||||
|
|
|
@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
|
|||
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
|
||||
obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o
|
||||
obj-$(CONFIG_PINCTRL_TEGRA124) += pinctrl-tegra124.o
|
||||
obj-$(CONFIG_PINCTRL_TEGRA210) += pinctrl-tegra210.o
|
||||
obj-$(CONFIG_PINCTRL_TEGRA_XUSB) += pinctrl-tegra-xusb.o
|
||||
obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o
|
||||
obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o
|
||||
|
|
1588
drivers/pinctrl/pinctrl-tegra210.c
Normal file
1588
drivers/pinctrl/pinctrl-tegra210.c
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user