From 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Thu, 6 Sep 2012 15:45:37 +0300 Subject: [PATCH] serial: omap: fix software flow control Software flow control register bits were not defined correctly. Also clarify the IXON and IXOFF logic to reflect what userspace wants. Cc: stable@vger.kernel.org Tested-by: Shubhrajyoti D Signed-off-by: Vikram Pandita Signed-off-by: Shubhrajyoti D Acked-by: Tony Lindgren Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- arch/arm/plat-omap/include/plat/omap-serial.h | 4 ++-- drivers/tty/serial/omap-serial.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 90d2d74d1682..a79ed8b17d9b 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -42,10 +42,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 +#define OMAP_UART_SW_TX 0x8 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 +#define OMAP_UART_SW_RX 0x2 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 6a58f4f64f81..1ba1f439a5b0 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -617,19 +617,19 @@ serial_omap_configure_xonxoff /* * IXON Flag: - * Enable XON/XOFF flow control on output. - * Transmit XON1, XOFF1 + * Flow control for OMAP.TX + * OMAP.RX should listen for XON/XOFF */ if (termios->c_iflag & IXON) - up->efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_RX; /* * IXOFF Flag: - * Enable XON/XOFF flow control on input. - * Receiver compares XON1, XOFF1. + * Flow control for OMAP.RX + * OMAP.TX should send XON/XOFF */ if (termios->c_iflag & IXOFF) - up->efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_TX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);