forked from luck/tmp_suning_uos_patched
powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU
- 2 GB of DDR2 onboard memory
- Four Gigabit Ethernets
- Five 16550 compatible UARTs
- One USB 2.0 port
- Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots
- A DS1375 Real Time Clock (RTC)
- 512 KB of Non-Volatile Memory (NVRAM)
- Two 64 KB EEPROMs
- 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations:
This patch covers only models 171 and 173
No plans to support CPLD timers
Know issues:
All four PHYs work in polling mode
Configuration is missing for:
PCI IDSEL and PCI Interrupt definition
Support is missing for:
Cache and memory controllers (which are very similar to the 85xx ones
but right now I don't know if we can re-use their support)
Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <oss@buserror.net>
This commit is contained in:
Alessio Igor Bogani
Scott Wood
parent
ae9ac1d329
commit
97493e2e9e
|
|
@ -113,6 +113,7 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
|
|||
src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
|
||||
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
|
||||
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
|
||||
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
|
||||
|
||||
src-wlib := $(sort $(src-wlib-y))
|
||||
src-plat := $(sort $(src-plat-y))
|
||||
|
|
@ -296,6 +297,9 @@ image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
|||
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
||||
image-$(CONFIG_KSI8560) += cuImage.ksi8560
|
||||
|
||||
# Board ports in arch/powerpc/platform/86xx/Kconfig
|
||||
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
|
||||
|
||||
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
|
||||
image-$(CONFIG_STORCENTER) += cuImage.storcenter
|
||||
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
|
||||
|
|
|
|||
153
arch/powerpc/boot/dts/fsl/mvme7100.dts
Normal file
153
arch/powerpc/boot/dts/fsl/mvme7100.dts
Normal file
|
|
@ -0,0 +1,153 @@
|
|||
/*
|
||||
* Device tree source for the Emerson/Artesyn MVME7100
|
||||
*
|
||||
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
|
||||
*
|
||||
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
/include/ "mpc8641si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MVME7100";
|
||||
compatible = "artesyn,MVME7100";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x80000000>;
|
||||
};
|
||||
|
||||
soc: soc@f1000000 {
|
||||
ranges = <0x00000000 0xf1000000 0x00100000>;
|
||||
|
||||
i2c@3000 {
|
||||
hwmon@4c {
|
||||
compatible = "dallas,max6649";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
phy0: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
phy1: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
phy2: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
phy3: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
phy-handle = <&phy2>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet3: ethernet@27000 {
|
||||
phy-handle = <&phy3>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
mdio@27520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
lbc: localbus@f1005000 {
|
||||
reg = <0xf1005000 0x1000>;
|
||||
|
||||
ranges = <0 0 0xf8000000 0x08000000 // NOR Flash (128MB)
|
||||
2 0 0xf2030000 0x00010000 // NAND Flash (8GB)
|
||||
3 0 0xf2400000 0x00080000 // MRAM (512KB)
|
||||
4 0 0xf2000000 0x00010000 // BCSR
|
||||
5 0 0xf2010000 0x00010000>; // QUART
|
||||
|
||||
bcsr@4,0 {
|
||||
compatible = "artesyn,mvme7100-bcsr";
|
||||
reg = <4 0 0x10000>;
|
||||
};
|
||||
|
||||
serial@5,1000 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <5 0x1000 0x100>;
|
||||
clock-frequency = <1843200>;
|
||||
interrupts = <11 1 0 0>;
|
||||
};
|
||||
|
||||
serial@5,2000 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <5 0x2000 0x100>;
|
||||
clock-frequency = <1843200>;
|
||||
interrupts = <11 1 0 0>;
|
||||
};
|
||||
|
||||
serial@5,3000 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <5 0x3000 0x100>;
|
||||
clock-frequency = <1843200>;
|
||||
interrupts = <11 1 0 0>;
|
||||
};
|
||||
|
||||
serial@5,4000 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <5 0x4000 0x100>;
|
||||
clock-frequency = <1843200>;
|
||||
interrupts = <11 1 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@f1008000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@f1009000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = &serial0;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "mpc8641si-post.dtsi"
|
||||
11
arch/powerpc/boot/motload-head.S
Normal file
11
arch/powerpc/boot/motload-head.S
Normal file
|
|
@ -0,0 +1,11 @@
|
|||
#include "ppc_asm.h"
|
||||
|
||||
.text
|
||||
.globl _zimage_start
|
||||
_zimage_start:
|
||||
mfmsr r10
|
||||
rlwinm r10,r10,0,~(1<<15) /* Clear MSR_EE */
|
||||
sync
|
||||
mtmsr r10
|
||||
isync
|
||||
b _zimage_start_lib
|
||||
59
arch/powerpc/boot/mvme7100.c
Normal file
59
arch/powerpc/boot/mvme7100.c
Normal file
|
|
@ -0,0 +1,59 @@
|
|||
/*
|
||||
* Motload compatibility for the Emerson/Artesyn MVME7100
|
||||
*
|
||||
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
|
||||
*
|
||||
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "ops.h"
|
||||
#include "stdio.h"
|
||||
#include "cuboot.h"
|
||||
|
||||
#define TARGET_86xx
|
||||
#define TARGET_HAS_ETH1
|
||||
#define TARGET_HAS_ETH2
|
||||
#define TARGET_HAS_ETH3
|
||||
#include "ppcboot.h"
|
||||
|
||||
static bd_t bd;
|
||||
|
||||
BSS_STACK(16384);
|
||||
|
||||
static void mvme7100_fixups(void)
|
||||
{
|
||||
void *devp;
|
||||
unsigned long busfreq = bd.bi_busfreq * 1000000;
|
||||
|
||||
dt_fixup_cpu_clocks(bd.bi_intfreq * 1000000, busfreq / 4, busfreq);
|
||||
|
||||
devp = finddevice("/soc@f1000000");
|
||||
if (devp)
|
||||
setprop(devp, "bus-frequency", &busfreq, sizeof(busfreq));
|
||||
|
||||
devp = finddevice("/soc/serial@4500");
|
||||
if (devp)
|
||||
setprop(devp, "clock-frequency", &busfreq, sizeof(busfreq));
|
||||
|
||||
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
||||
|
||||
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
|
||||
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
|
||||
dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
|
||||
dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
|
||||
}
|
||||
|
||||
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
unsigned long r6, unsigned long r7)
|
||||
{
|
||||
CUBOOT_INIT();
|
||||
fdt_init(_dtb_start);
|
||||
serial_console_init();
|
||||
platform_ops.fixups = mvme7100_fixups;
|
||||
}
|
||||
|
|
@ -43,7 +43,7 @@ typedef struct bd_info {
|
|||
unsigned long bi_sramstart; /* start of SRAM memory */
|
||||
unsigned long bi_sramsize; /* size of SRAM memory */
|
||||
#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
|
||||
defined(TARGET_83xx)
|
||||
defined(TARGET_83xx) || defined(TARGET_86xx)
|
||||
unsigned long bi_immr_base; /* base of IMMR register */
|
||||
#endif
|
||||
#if defined(TARGET_PPC_MPC52xx)
|
||||
|
|
|
|||
|
|
@ -302,6 +302,11 @@ mvme5100)
|
|||
platformo="$object/fixed-head.o $object/mvme5100.o"
|
||||
binary=y
|
||||
;;
|
||||
mvme7100)
|
||||
platformo="$object/motload-head.o $object/mvme7100.o"
|
||||
link_address='0x4000000'
|
||||
binary=y
|
||||
;;
|
||||
esac
|
||||
|
||||
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
|
||||
|
|
|
|||
|
|
@ -74,9 +74,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
|
|||
CONFIG_SERIAL_8250_DETECT_IRQ=y
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_MANY_PORTS=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=2
|
||||
CONFIG_SERIAL_8250_NR_UARTS=5
|
||||
CONFIG_SERIAL_8250_RSA=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
|
|
|
|||
|
|
@ -8,3 +8,4 @@ CONFIG_GEF_SBC610=y
|
|||
CONFIG_MPC8610_HPCD=y
|
||||
CONFIG_MPC8641_HPCN=y
|
||||
CONFIG_SBC8641D=y
|
||||
CONFIG_MVME7100=y
|
||||
|
|
|
|||
|
|
@ -61,6 +61,11 @@ config GEF_SBC610
|
|||
help
|
||||
This option enables support for the GE SBC610.
|
||||
|
||||
config MVME7100
|
||||
bool "Artesyn MVME7100"
|
||||
help
|
||||
This option enables support for the Emerson/Artesyn MVME7100 board.
|
||||
|
||||
endif
|
||||
|
||||
config MPC8641
|
||||
|
|
@ -69,7 +74,8 @@ config MPC8641
|
|||
select FSL_PCI if PCI
|
||||
select PPC_UDBG_16550
|
||||
select MPIC
|
||||
default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
|
||||
default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
|
||||
|| MVME7100
|
||||
|
||||
config MPC8610
|
||||
bool
|
||||
|
|
|
|||
|
|
@ -10,3 +10,4 @@ obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
|
|||
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
|
||||
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
|
||||
obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
|
||||
obj-$(CONFIG_MVME7100) += mvme7100.o
|
||||
|
|
|
|||
121
arch/powerpc/platforms/86xx/mvme7100.c
Normal file
121
arch/powerpc/platforms/86xx/mvme7100.c
Normal file
|
|
@ -0,0 +1,121 @@
|
|||
/*
|
||||
* Board setup routines for the Emerson/Artesyn MVME7100
|
||||
*
|
||||
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
|
||||
*
|
||||
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
|
||||
*
|
||||
* Based on earlier code by:
|
||||
*
|
||||
* Ajit Prem <ajit.prem@emerson.com>
|
||||
* Copyright 2008 Emerson
|
||||
*
|
||||
* USB host fixup is borrowed by:
|
||||
*
|
||||
* Martyn Welch <martyn.welch@ge.com>
|
||||
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
|
||||
#include "mpc86xx.h"
|
||||
|
||||
#define MVME7100_INTERRUPT_REG_2_OFFSET 0x05
|
||||
#define MVME7100_DS1375_MASK 0x40
|
||||
#define MVME7100_MAX6649_MASK 0x20
|
||||
#define MVME7100_ABORT_MASK 0x10
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init mvme7100_setup_arch(void)
|
||||
{
|
||||
struct device_node *bcsr_node;
|
||||
void __iomem *mvme7100_regs = NULL;
|
||||
u8 reg;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mvme7100_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
/* Remap BCSR registers */
|
||||
bcsr_node = of_find_compatible_node(NULL, NULL,
|
||||
"artesyn,mvme7100-bcsr");
|
||||
if (bcsr_node) {
|
||||
mvme7100_regs = of_iomap(bcsr_node, 0);
|
||||
of_node_put(bcsr_node);
|
||||
}
|
||||
|
||||
if (mvme7100_regs) {
|
||||
/* Disable ds1375, max6649, and abort interrupts */
|
||||
reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
|
||||
reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK
|
||||
| MVME7100_ABORT_MASK;
|
||||
writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
|
||||
} else
|
||||
pr_warn("Unable to map board registers\n");
|
||||
|
||||
pr_info("MVME7100 board from Artesyn\n");
|
||||
}
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init mvme7100_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
return of_flat_dt_is_compatible(root, "artesyn,MVME7100");
|
||||
}
|
||||
|
||||
static void mvme7100_usb_host_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
unsigned int val;
|
||||
|
||||
if (!machine_is(mvme7100))
|
||||
return;
|
||||
|
||||
/* Ensure only ports 1 & 2 are enabled */
|
||||
pci_read_config_dword(pdev, 0xe0, &val);
|
||||
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
|
||||
|
||||
/* System clock is 48-MHz Oscillator and EHCI Enabled. */
|
||||
pci_write_config_dword(pdev, 0xe4, 1 << 5);
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
|
||||
mvme7100_usb_host_fixup);
|
||||
|
||||
machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices);
|
||||
|
||||
define_machine(mvme7100) {
|
||||
.name = "MVME7100",
|
||||
.probe = mvme7100_probe,
|
||||
.setup_arch = mvme7100_setup_arch,
|
||||
.init_IRQ = mpc86xx_init_irq,
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.time_init = mpc86xx_time_init,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user