AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[PATCH] bcm43xx: workaround init_board vs. IRQ race

Browse Source 
Place the Init-vs-IRQ workaround before any card register
access, because we might not have the wireless core mapped
at all times in init. So this will result in a Machine Check
caused by a bus error.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Michael Buesch 2006-06-17 15:19:05 +02:00 committed by Jeff Garzik
parent e8d5969722
commit a1d79aaaa5
1 changed files with 14 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
drivers/net/wireless/bcm43xx/bcm43xx_main.c
View File

@ -1885,6 +1885,15 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re
spin_lock(&bcm->irq_lock);
/* Only accept IRQs, if we are initialized properly.
* This avoids an RX race while initializing.
* We should probably not enable IRQs before we are initialized
* completely, but some careful work is needed to fix this. I think it
* is best to stay with this cheap workaround for now... .
*/
if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED))
goto out;
reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) {
/* irq not for us (shared irq) */
@ -1906,19 +1915,11 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re
bcm43xx_interrupt_ack(bcm, reason);
/* Only accept IRQs, if we are initialized properly.
* This avoids an RX race while initializing.
* We should probably not enable IRQs before we are initialized
* completely, but some careful work is needed to fix this. I think it
* is best to stay with this cheap workaround for now... .
*/
if (likely(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)) {
/* disable all IRQs. They are enabled again in the bottom half. */
bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
/* save the reason code and call our bottom half. */
bcm->irq_reason = reason;
tasklet_schedule(&bcm->isr_tasklet);
}
/* disable all IRQs. They are enabled again in the bottom half. */
bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
/* save the reason code and call our bottom half. */
bcm->irq_reason = reason;
tasklet_schedule(&bcm->isr_tasklet);
out:
mmiowb();