forked from luck/tmp_suning_uos_patched
drivers/video: add support for the Solomon SSD1307 OLED Controller
Add support for the Solomon SSD1307 OLED controller found on the Crystalfontz CFA10036 board. This controller can drive a display with a resolution up to 128x39 and can operate over I2C or SPI. The current driver has only been tested on the CFA-10036, that is using this controller over I2C to driver a 96x16 OLED screen. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Greg KH <gregkh@linux-foundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Thomas Petazzoni <thomas@free-electrons.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This commit is contained in:
Maxime Ripard
Tomi Valkeinen
parent
8f22e8eaba
commit
a2ed00da50
24
Documentation/devicetree/bindings/video/ssd1307fb.txt
Normal file
24
Documentation/devicetree/bindings/video/ssd1307fb.txt
Normal file
|
|
@ -0,0 +1,24 @@
|
|||
* Solomon SSD1307 Framebuffer Driver
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for
|
||||
now is i2c.
|
||||
- reg: Should contain address of the controller on the I2C bus. Most likely
|
||||
0x3c or 0x3d
|
||||
- pwm: Should contain the pwm to use according to the OF device tree PWM
|
||||
specification [0]
|
||||
- reset-gpios: Should contain the GPIO used to reset the OLED display
|
||||
|
||||
Optional properties:
|
||||
- reset-active-low: Is the reset gpio is active on physical low?
|
||||
|
||||
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
|
||||
|
||||
Examples:
|
||||
ssd1307: oled@3c {
|
||||
compatible = "solomon,ssd1307fb-i2c";
|
||||
reg = <0x3c>;
|
||||
pwms = <&pwm 4 3000>;
|
||||
reset-gpios = <&gpio2 7>;
|
||||
reset-active-low;
|
||||
};
|
||||
|
|
@ -2442,4 +2442,19 @@ config FB_SH_MOBILE_MERAM
|
|||
Up to 4 memory channels can be configured, allowing 4 RGB or
|
||||
2 YCbCr framebuffers to be configured.
|
||||
|
||||
config FB_SSD1307
|
||||
tristate "Solomon SSD1307 framebuffer support"
|
||||
depends on FB && I2C
|
||||
depends on OF
|
||||
depends on GENERIC_GPIO
|
||||
select FB_SYS_FOPS
|
||||
select FB_SYS_FILLRECT
|
||||
select FB_SYS_COPYAREA
|
||||
select FB_SYS_IMAGEBLIT
|
||||
select FB_DEFERRED_IO
|
||||
select PWM
|
||||
help
|
||||
This driver implements support for the Solomon SSD1307
|
||||
OLED controller over I2C.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -161,6 +161,7 @@ obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
|
|||
obj-$(CONFIG_FB_MX3) += mx3fb.o
|
||||
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
|
||||
obj-$(CONFIG_FB_MXS) += mxsfb.o
|
||||
obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
|
||||
|
||||
# the test framebuffer is last
|
||||
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
|
||||
|
|
|
|||
396
drivers/video/ssd1307fb.c
Normal file
396
drivers/video/ssd1307fb.c
Normal file
|
|
@ -0,0 +1,396 @@
|
|||
/*
|
||||
* Driver for the Solomon SSD1307 OLED controler
|
||||
*
|
||||
* Copyright 2012 Free Electrons
|
||||
*
|
||||
* Licensed under the GPLv2 or later.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#define SSD1307FB_WIDTH 96
|
||||
#define SSD1307FB_HEIGHT 16
|
||||
|
||||
#define SSD1307FB_DATA 0x40
|
||||
#define SSD1307FB_COMMAND 0x80
|
||||
|
||||
#define SSD1307FB_CONTRAST 0x81
|
||||
#define SSD1307FB_SEG_REMAP_ON 0xa1
|
||||
#define SSD1307FB_DISPLAY_OFF 0xae
|
||||
#define SSD1307FB_DISPLAY_ON 0xaf
|
||||
#define SSD1307FB_START_PAGE_ADDRESS 0xb0
|
||||
|
||||
struct ssd1307fb_par {
|
||||
struct i2c_client *client;
|
||||
struct fb_info *info;
|
||||
struct pwm_device *pwm;
|
||||
u32 pwm_period;
|
||||
int reset;
|
||||
};
|
||||
|
||||
static struct fb_fix_screeninfo ssd1307fb_fix __devinitdata = {
|
||||
.id = "Solomon SSD1307",
|
||||
.type = FB_TYPE_PACKED_PIXELS,
|
||||
.visual = FB_VISUAL_MONO10,
|
||||
.xpanstep = 0,
|
||||
.ypanstep = 0,
|
||||
.ywrapstep = 0,
|
||||
.line_length = SSD1307FB_WIDTH / 8,
|
||||
.accel = FB_ACCEL_NONE,
|
||||
};
|
||||
|
||||
static struct fb_var_screeninfo ssd1307fb_var __devinitdata = {
|
||||
.xres = SSD1307FB_WIDTH,
|
||||
.yres = SSD1307FB_HEIGHT,
|
||||
.xres_virtual = SSD1307FB_WIDTH,
|
||||
.yres_virtual = SSD1307FB_HEIGHT,
|
||||
.bits_per_pixel = 1,
|
||||
};
|
||||
|
||||
static int ssd1307fb_write_array(struct i2c_client *client, u8 type, u8 *cmd, u32 len)
|
||||
{
|
||||
u8 *buf;
|
||||
int ret = 0;
|
||||
|
||||
buf = kzalloc(len + 1, GFP_KERNEL);
|
||||
if (!buf) {
|
||||
dev_err(&client->dev, "Couldn't allocate sending buffer.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
buf[0] = type;
|
||||
memcpy(buf + 1, cmd, len);
|
||||
|
||||
ret = i2c_master_send(client, buf, len + 1);
|
||||
if (ret != len + 1) {
|
||||
dev_err(&client->dev, "Couldn't send I2C command.\n");
|
||||
goto error;
|
||||
}
|
||||
|
||||
error:
|
||||
kfree(buf);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline int ssd1307fb_write_cmd_array(struct i2c_client *client, u8 *cmd, u32 len)
|
||||
{
|
||||
return ssd1307fb_write_array(client, SSD1307FB_COMMAND, cmd, len);
|
||||
}
|
||||
|
||||
static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
|
||||
{
|
||||
return ssd1307fb_write_cmd_array(client, &cmd, 1);
|
||||
}
|
||||
|
||||
static inline int ssd1307fb_write_data_array(struct i2c_client *client, u8 *cmd, u32 len)
|
||||
{
|
||||
return ssd1307fb_write_array(client, SSD1307FB_DATA, cmd, len);
|
||||
}
|
||||
|
||||
static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data)
|
||||
{
|
||||
return ssd1307fb_write_data_array(client, &data, 1);
|
||||
}
|
||||
|
||||
static void ssd1307fb_update_display(struct ssd1307fb_par *par)
|
||||
{
|
||||
u8 *vmem = par->info->screen_base;
|
||||
int i, j, k;
|
||||
|
||||
/*
|
||||
* The screen is divided in pages, each having a height of 8
|
||||
* pixels, and the width of the screen. When sending a byte of
|
||||
* data to the controller, it gives the 8 bits for the current
|
||||
* column. I.e, the first byte are the 8 bits of the first
|
||||
* column, then the 8 bits for the second column, etc.
|
||||
*
|
||||
*
|
||||
* Representation of the screen, assuming it is 5 bits
|
||||
* wide. Each letter-number combination is a bit that controls
|
||||
* one pixel.
|
||||
*
|
||||
* A0 A1 A2 A3 A4
|
||||
* B0 B1 B2 B3 B4
|
||||
* C0 C1 C2 C3 C4
|
||||
* D0 D1 D2 D3 D4
|
||||
* E0 E1 E2 E3 E4
|
||||
* F0 F1 F2 F3 F4
|
||||
* G0 G1 G2 G3 G4
|
||||
* H0 H1 H2 H3 H4
|
||||
*
|
||||
* If you want to update this screen, you need to send 5 bytes:
|
||||
* (1) A0 B0 C0 D0 E0 F0 G0 H0
|
||||
* (2) A1 B1 C1 D1 E1 F1 G1 H1
|
||||
* (3) A2 B2 C2 D2 E2 F2 G2 H2
|
||||
* (4) A3 B3 C3 D3 E3 F3 G3 H3
|
||||
* (5) A4 B4 C4 D4 E4 F4 G4 H4
|
||||
*/
|
||||
|
||||
for (i = 0; i < (SSD1307FB_HEIGHT / 8); i++) {
|
||||
ssd1307fb_write_cmd(par->client, SSD1307FB_START_PAGE_ADDRESS + (i + 1));
|
||||
ssd1307fb_write_cmd(par->client, 0x00);
|
||||
ssd1307fb_write_cmd(par->client, 0x10);
|
||||
|
||||
for (j = 0; j < SSD1307FB_WIDTH; j++) {
|
||||
u8 buf = 0;
|
||||
for (k = 0; k < 8; k++) {
|
||||
u32 page_length = SSD1307FB_WIDTH * i;
|
||||
u32 index = page_length + (SSD1307FB_WIDTH * k + j) / 8;
|
||||
u8 byte = *(vmem + index);
|
||||
u8 bit = byte & (1 << (7 - (j % 8)));
|
||||
bit = bit >> (7 - (j % 8));
|
||||
buf |= bit << k;
|
||||
}
|
||||
ssd1307fb_write_data(par->client, buf);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf,
|
||||
size_t count, loff_t *ppos)
|
||||
{
|
||||
struct ssd1307fb_par *par = info->par;
|
||||
unsigned long total_size;
|
||||
unsigned long p = *ppos;
|
||||
u8 __iomem *dst;
|
||||
|
||||
total_size = info->fix.smem_len;
|
||||
|
||||
if (p > total_size)
|
||||
return -EINVAL;
|
||||
|
||||
if (count + p > total_size)
|
||||
count = total_size - p;
|
||||
|
||||
if (!count)
|
||||
return -EINVAL;
|
||||
|
||||
dst = (void __force *) (info->screen_base + p);
|
||||
|
||||
if (copy_from_user(dst, buf, count))
|
||||
return -EFAULT;
|
||||
|
||||
ssd1307fb_update_display(par);
|
||||
|
||||
*ppos += count;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
||||
{
|
||||
struct ssd1307fb_par *par = info->par;
|
||||
sys_fillrect(info, rect);
|
||||
ssd1307fb_update_display(par);
|
||||
}
|
||||
|
||||
static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
|
||||
{
|
||||
struct ssd1307fb_par *par = info->par;
|
||||
sys_copyarea(info, area);
|
||||
ssd1307fb_update_display(par);
|
||||
}
|
||||
|
||||
static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image)
|
||||
{
|
||||
struct ssd1307fb_par *par = info->par;
|
||||
sys_imageblit(info, image);
|
||||
ssd1307fb_update_display(par);
|
||||
}
|
||||
|
||||
static struct fb_ops ssd1307fb_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.fb_read = fb_sys_read,
|
||||
.fb_write = ssd1307fb_write,
|
||||
.fb_fillrect = ssd1307fb_fillrect,
|
||||
.fb_copyarea = ssd1307fb_copyarea,
|
||||
.fb_imageblit = ssd1307fb_imageblit,
|
||||
};
|
||||
|
||||
static void ssd1307fb_deferred_io(struct fb_info *info,
|
||||
struct list_head *pagelist)
|
||||
{
|
||||
ssd1307fb_update_display(info->par);
|
||||
}
|
||||
|
||||
static struct fb_deferred_io ssd1307fb_defio = {
|
||||
.delay = HZ,
|
||||
.deferred_io = ssd1307fb_deferred_io,
|
||||
};
|
||||
|
||||
static int __devinit ssd1307fb_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
{
|
||||
struct fb_info *info;
|
||||
u32 vmem_size = SSD1307FB_WIDTH * SSD1307FB_HEIGHT / 8;
|
||||
struct ssd1307fb_par *par;
|
||||
u8 *vmem;
|
||||
int ret;
|
||||
|
||||
if (!client->dev.of_node) {
|
||||
dev_err(&client->dev, "No device tree data found!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev);
|
||||
if (!info) {
|
||||
dev_err(&client->dev, "Couldn't allocate framebuffer.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
vmem = devm_kzalloc(&client->dev, vmem_size, GFP_KERNEL);
|
||||
if (!vmem) {
|
||||
dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
|
||||
ret = -ENOMEM;
|
||||
goto fb_alloc_error;
|
||||
}
|
||||
|
||||
info->fbops = &ssd1307fb_ops;
|
||||
info->fix = ssd1307fb_fix;
|
||||
info->fbdefio = &ssd1307fb_defio;
|
||||
|
||||
info->var = ssd1307fb_var;
|
||||
info->var.red.length = 1;
|
||||
info->var.red.offset = 0;
|
||||
info->var.green.length = 1;
|
||||
info->var.green.offset = 0;
|
||||
info->var.blue.length = 1;
|
||||
info->var.blue.offset = 0;
|
||||
|
||||
info->screen_base = (u8 __force __iomem *)vmem;
|
||||
info->fix.smem_start = (unsigned long)vmem;
|
||||
info->fix.smem_len = vmem_size;
|
||||
|
||||
fb_deferred_io_init(info);
|
||||
|
||||
par = info->par;
|
||||
par->info = info;
|
||||
par->client = client;
|
||||
|
||||
par->reset = of_get_named_gpio(client->dev.of_node,
|
||||
"reset-gpios", 0);
|
||||
if (!gpio_is_valid(par->reset)) {
|
||||
ret = -EINVAL;
|
||||
goto reset_oled_error;
|
||||
}
|
||||
|
||||
ret = devm_gpio_request_one(&client->dev, par->reset,
|
||||
GPIOF_OUT_INIT_HIGH,
|
||||
"oled-reset");
|
||||
if (ret) {
|
||||
dev_err(&client->dev,
|
||||
"failed to request gpio %d: %d\n",
|
||||
par->reset, ret);
|
||||
goto reset_oled_error;
|
||||
}
|
||||
|
||||
par->pwm = pwm_get(&client->dev, NULL);
|
||||
if (IS_ERR(par->pwm)) {
|
||||
dev_err(&client->dev, "Could not get PWM from device tree!\n");
|
||||
ret = PTR_ERR(par->pwm);
|
||||
goto pwm_error;
|
||||
}
|
||||
|
||||
par->pwm_period = pwm_get_period(par->pwm);
|
||||
|
||||
dev_dbg(&client->dev, "Using PWM%d with a %dns period.\n", par->pwm->pwm, par->pwm_period);
|
||||
|
||||
ret = register_framebuffer(info);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "Couldn't register the framebuffer\n");
|
||||
goto fbreg_error;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, info);
|
||||
|
||||
/* Reset the screen */
|
||||
gpio_set_value(par->reset, 0);
|
||||
udelay(4);
|
||||
gpio_set_value(par->reset, 1);
|
||||
udelay(4);
|
||||
|
||||
/* Enable the PWM */
|
||||
pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
|
||||
pwm_enable(par->pwm);
|
||||
|
||||
/* Map column 127 of the OLED to segment 0 */
|
||||
ret = ssd1307fb_write_cmd(client, SSD1307FB_SEG_REMAP_ON);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Couldn't remap the screen.\n");
|
||||
goto remap_error;
|
||||
}
|
||||
|
||||
/* Turn on the display */
|
||||
ret = ssd1307fb_write_cmd(client, SSD1307FB_DISPLAY_ON);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Couldn't turn the display on.\n");
|
||||
goto remap_error;
|
||||
}
|
||||
|
||||
dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
|
||||
|
||||
return 0;
|
||||
|
||||
remap_error:
|
||||
unregister_framebuffer(info);
|
||||
pwm_disable(par->pwm);
|
||||
fbreg_error:
|
||||
pwm_put(par->pwm);
|
||||
pwm_error:
|
||||
reset_oled_error:
|
||||
fb_deferred_io_cleanup(info);
|
||||
fb_alloc_error:
|
||||
framebuffer_release(info);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit ssd1307fb_remove(struct i2c_client *client)
|
||||
{
|
||||
struct fb_info *info = i2c_get_clientdata(client);
|
||||
struct ssd1307fb_par *par = info->par;
|
||||
|
||||
unregister_framebuffer(info);
|
||||
pwm_disable(par->pwm);
|
||||
pwm_put(par->pwm);
|
||||
fb_deferred_io_cleanup(info);
|
||||
framebuffer_release(info);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ssd1307fb_i2c_id[] = {
|
||||
{ "ssd1307fb", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);
|
||||
|
||||
static const struct of_device_id ssd1307fb_of_match[] = {
|
||||
{ .compatible = "solomon,ssd1307fb-i2c" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);
|
||||
|
||||
static struct i2c_driver ssd1307fb_driver = {
|
||||
.probe = ssd1307fb_probe,
|
||||
.remove = __devexit_p(ssd1307fb_remove),
|
||||
.id_table = ssd1307fb_i2c_id,
|
||||
.driver = {
|
||||
.name = "ssd1307fb",
|
||||
.of_match_table = of_match_ptr(ssd1307fb_of_match),
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
module_i2c_driver(ssd1307fb_driver);
|
||||
|
||||
MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controler");
|
||||
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user