alim15x3: fix handling of DMA timings

Stop depending on the BIOS setup.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2010-01-18 07:21:19 +00:00 committed by David S. Miller
parent 5740345b87
commit a345c7856e

View File

@ -61,6 +61,25 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
pci_write_config_byte(pdev, pio_fifo, fifo);
}
static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
struct ide_timing *t)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
int port = hwif->channel ? 0x5c : 0x58;
u8 unit = drive->dn & 1;
t->setup = clamp_val(t->setup, 1, 8) & 7;
t->act8b = clamp_val(t->act8b, 1, 8) & 7;
t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
t->active = clamp_val(t->active, 1, 8) & 7;
t->recover = clamp_val(t->recover, 1, 16) & 15;
pci_write_config_byte(dev, port, t->setup);
pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b);
pci_write_config_byte(dev, port + unit + 2,
(t->active << 4) | t->recover);
}
/**
* ali_set_pio_mode - set host controller for PIO mode
* @hwif: port
@ -71,12 +90,9 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *pair = ide_get_pair_dev(drive);
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
unsigned long T = 1000000 / bus_speed; /* PCI clock based */
int port = hwif->channel ? 0x5c : 0x58;
u8 unit = drive->dn & 1;
struct ide_timing t;
ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
@ -93,21 +109,12 @@ static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
}
}
t.setup = clamp_val(t.setup, 1, 8) & 7;
t.act8b = clamp_val(t.act8b, 1, 8) & 7;
t.rec8b = clamp_val(t.rec8b, 1, 16) & 15;
t.active = clamp_val(t.active, 1, 8) & 7;
t.recover = clamp_val(t.recover, 1, 16) & 15;
/*
* PIO mode => ATA FIFO on, ATAPI FIFO off
*/
ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
pci_write_config_byte(dev, port, t.setup);
pci_write_config_byte(dev, port + 1, (t.act8b << 4) | t.rec8b);
pci_write_config_byte(dev, port + unit + 2,
(t.active << 4) | t.recover);
ali_program_timings(hwif, drive, &t);
}
/**
@ -146,11 +153,15 @@ static u8 ali_udma_filter(ide_drive_t *drive)
static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *pair = ide_get_pair_dev(drive);
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
unsigned long T = 1000000 / bus_speed; /* PCI clock based */
const u8 speed = drive->dma_mode;
u8 speed1 = speed;
u8 unit = drive->dn & 1;
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
struct ide_timing t;
if (speed == XFER_UDMA_6)
speed1 = 0x47;
@ -164,9 +175,21 @@ static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
tmpbyte &= ultra_enable;
pci_write_config_byte(dev, m5229_udma, tmpbyte);
/*
* FIXME: Oh, my... DMA timings are never set.
*/
ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
if (pair) {
struct ide_timing p;
ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
ide_timing_merge(&p, &t, &t,
IDE_TIMING_SETUP | IDE_TIMING_8BIT);
if (pair->dma_mode) {
ide_timing_compute(pair, pair->dma_mode,
&p, T, 1);
ide_timing_merge(&p, &t, &t,
IDE_TIMING_SETUP | IDE_TIMING_8BIT);
}
}
ali_program_timings(hwif, drive, &t);
} else {
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
tmpbyte &= (0x0f << ((1-unit) << 2));