ARC updates for 4.11 rc1

- Intc imporvements [Yuriy]
 
  - VDK platform updates [Alexey]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrci0AAoJEGnX8d3iisJeNYcQAI3QH6jYnqb27viEqZ0jmTcC
 ItrxiD6L6oeiSYRZg9lY/4FwwiQUDhM3/Kt/+hGhLz1SBqjXGJ79DgtVyRTdHh+m
 nNiNrDVbFuiV6P8KbZX85tjW5QJI2HuahUoxyGNvnFG1k6vujmHuKBYm7eNz7XuM
 +18t89xqeQs7oluPX/MhuhfGwMzxscK69hT100WclYv/k2+mpU1fN/19Ygaw+IKJ
 p5HpxWj8WjyZ+4yODaqrZhFSwyOp8a+2nIMSPu0LIq+tg3a+kj+yACZfdmV+WbuD
 WncqI+tVzevk45BjSOH/3s1WOmNqAJswADpLS7AjVs/UmrK77UkQwRNo1jtEIz6Y
 XaCRuebCtWtoTDd1B44eHQNVStrQCnapjuUlTy7iFDwd/ldexrKFRO0DrvUvx652
 XFgSY0BWyc3rnlckDugKixG6RnqY0jsGEaJAe2hNaMS3t87Pt1vNZ6y+75v0917F
 cG+rShA6GQ1vBaed+vWG8ocnKCfrzYsAODOBSko16KUdZsKTDIXCTMunFASr7Erg
 Z2wY4ntXVgRRhVCZX7poICwPnlvxKZrQfbbR7i+Z0Jmnuog1yEMMkUwK6Cn3cHoX
 mvQgPF1+XNGL0/8cXDuFGYyVKSpD6/Vc1z3bTjkjxy43Amys4faPFinXvZH7nJLK
 I/4jBW4+0QI38PxQFcfA
 =WPBu
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - Intc imporvements [Yuriy]

 - VDK platform updates [Alexey]

* tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant
  ARCv2: intc: Delete useless comments in Device Trees
  ARCv2: IDU-intc: Delete deprecated parameters in Device Trees
  ARCv2: IDU-intc: mask all common interrupts by default
  ARCv2: IDU-intc: Use build registers for getting numbers of interrupts
  ARCv2: intc: Set default priority for all core interrupts
  ARCv2: intc: Use runtime value of irq count for setting up intc
  ARCv2: intc: Rework the build time irq count information
  ARC: [intc-*]: confine NR_CPU_IRQS to intc code
  ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg
  arc: vdk: Add support of UIO
  arc: vdk: Add support of MMC controller
  arc: vdk: Disable halt on reset

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -8,15 +8,11 @@ Properties:
 - compatible: "snps,archs-idu-intc"
 - interrupt-controller: This is an interrupt controller.
 - interrupt-parent: <reference to parent core intc>
-- #interrupt-cells: Must be <2>.
+- #interrupt-cells: Must be <1>.
-- interrupts: <...> specifies the upstream core irqs
 
-  First cell specifies the "common" IRQ from peripheral to IDU
+  Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
-  Second cell specifies the irq distribution mode to cores
+  of the particular interrupt line of IDU corresponds to the line N+24 of the
-     0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+  core interrupt controller.
-
-  The second cell in interrupts property is deprecated and may be ignored by
-  the kernel.
 
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
@@ -32,18 +28,10 @@ Example:
 		compatible = "snps,archs-idu-intc";
 		interrupt-controller;
 		interrupt-parent = <&core_intc>;
-
+		#interrupt-cells = <1>;
-		/*
-		 * <hwirq  distribution>
-		 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-		 */
-		#interrupt-cells = <2>;
-
-		/* upstream core irqs: downstream these are "COMMON" irq 0,1..  */
-		interrupts = <24 25 26 27 28 29 30 31>;
 	};
 
 	some_device: serial@c0fc1000 {
 		interrupt-parent = <&idu_intc>;
-		interrupts = <0 0>;	/* upstream idu IRQ #24, Round Robin */
+		interrupts = <0>;	/* upstream idu IRQ #24 */
 	};

arch/arc/Kconfig

@@ -180,16 +180,12 @@ config CPU_BIG_ENDIAN
 config SMP
 	bool "Symmetric Multi-Processing"
 	default n
-	select ARC_HAS_COH_CACHES if ISA_ARCV2
 	select ARC_MCIP if ISA_ARCV2
 	help
 	  This enables support for systems with more than one CPU.
 
 if SMP
 
-config ARC_HAS_COH_CACHES
-	def_bool n
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
@@ -219,8 +215,6 @@ config ARC_MCIP
 menuconfig ARC_CACHE
 	bool "Enable Cache Support"
 	default y
-	# if SMP, cache enabled ONLY if ARC implementation has cache coherency
-	depends on !SMP || ARC_HAS_COH_CACHES
 
 if ARC_CACHE
 
@@ -412,17 +406,6 @@ config ARC_HAS_DIV_REM
 	bool "Insn: div, divu, rem, remu"
 	default y
 
-config ARC_NUMBER_OF_INTERRUPTS
-	int "Number of interrupts"
-	range 8 240
-	default 32
-	help
-	  This defines the number of interrupts on the ARCv2HS core.
-	  It affects the size of vector table.
-	  The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
-	  in hardware, it keep things simple for Linux to assume they are always
-	  present.
-
 endif	# ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"

arch/arc/boot/dts/axc003_idu.dtsi

@@ -40,18 +40,7 @@ idu_intc: idu-interrupt-controller {
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25>;
 		};
 
 		/*
@@ -73,12 +62,7 @@ ictl_intc: gpio-controller@0 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupt-parent = <&idu_intc>;
-
+				interrupts = <1>;
-				/*
-				 * cmn irq 1 -> cpu irq 25
-				 * Distribute to cpu0 only
-				 */
-				interrupts = <1 1>;
 			};
 		};
 
@@ -119,8 +103,7 @@ mb_intc: dw-apb-ictl@0xe0012000 {
 		reg = < 0xe0012000 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&idu_intc>;
-		interrupts = <0 1>;	/* cmn irq 0 -> cpu irq 24
+		interrupts = <0>;
-					   distribute to cpu0 only */
 	};
 
 	memory {

arch/arc/boot/dts/haps_hs_idu.dts

@@ -47,18 +47,13 @@ core_intc: interrupt-controller {
 			compatible = "snps,archs-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-/*			interrupts = <16 17 18 19 20 21 22 23 24 25>; */
 		};
 
 		idu_intc: idu-interrupt-controller {
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-			/* <hwirq  distribution>
+			#interrupt-cells = <1>;
-			distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 */
-			#interrupt-cells = <2>;
-			interrupts = <24 25 26 27 28 29 30 31>;
-
 		};
 
 		uart0: serial@f0000000 {
@@ -66,9 +61,7 @@ uart0: serial@f0000000 {
 			compatible = "ns16550a";
 			reg = <0xf0000000 0x2000>;
 			interrupt-parent = <&idu_intc>;
-			/* interrupts = <0 1>;  DEST=1*/
+			interrupts = <0>;
-			/* interrupts = <0 2>;  DEST=2*/
-			interrupts = <0 0>;  /* RR*/
 			clock-frequency = <50000000>;
 			baud = <115200>;
 			reg-shift = <2>;

arch/arc/boot/dts/nsim_hs_idu.dts

@@ -46,25 +46,14 @@ idu_intc: idu-interrupt-controller {
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25 26 27 28 29 30 31>;
 		};
 
 		arcuart0: serial@c0fc1000 {
 			compatible = "snps,arc-uart";
 			reg = <0xc0fc1000 0x100>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <0 0>;
+			interrupts = <0>;
 			clock-frequency = <80000000>;
 			current-speed = <115200>;
 			status = "okay";

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -43,33 +43,20 @@ core_intc: core-interrupt-controller {
 			compatible = "snps,archs-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-/*			interrupts = <16 17 18 19 20 21 22 23 24 25>; */
 		};
 
 		idu_intc: idu-interrupt-controller {
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25 26 27 28 29 30 31>;
 		};
 
 		uart0: serial@f0000000 {
 			compatible = "ns8250";
 			reg = <0xf0000000 0x2000>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <0 0>; /* cmn irq 0 -> cpu irq 24
+			interrupts = <0>;
-						RR distribute to all cpus */
 			clock-frequency = <3686400>;
 			baud = <115200>;
 			reg-shift = <2>;
@@ -93,7 +80,7 @@ pgu@f9000000 {
 		ps2: ps2@f9001000 {
 			compatible = "snps,arc_ps2";
 			reg = <0xf9000400 0x14>;
-			interrupts = <3 0>;
+			interrupts = <3>;
 			interrupt-parent = <&idu_intc>;
 			interrupt-names = "arc_ps2_irq";
 		};
@@ -102,7 +89,7 @@ eth0: ethernet@f0003000 {
 			compatible = "ezchip,nps-mgt-enet";
 			reg = <0xf0003000 0x44>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <1 2>;
+			interrupts = <1>;
 		};
 
 		arcpct0: pct {

arch/arc/boot/dts/vdk_axc003_idu.dtsi

@@ -41,14 +41,7 @@ idu_intc: idu-interrupt-controller {
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			interrupts = <24 25 26 27>;
 		};
 
 		debug_uart: dw-apb-uart@0x5000 {
@@ -56,7 +49,7 @@ debug_uart: dw-apb-uart@0x5000 {
 			reg = <0x5000 0x100>;
 			clock-frequency = <2403200>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <2 0>;
+			interrupts = <2>;
 			baud = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -70,7 +63,7 @@ mb_intc: dw-apb-ictl@0xe0012000 {
 		reg = < 0xe0012000 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&idu_intc>;
-		interrupts = < 0 0 >;
+		interrupts = <0>;
 	};
 
 	memory {

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -23,6 +23,12 @@ apbclk: apbclk {
 				#clock-cells = <0>;
 			};
 
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
 			pguclk: pguclk {
 				#clock-cells = <0>;
 				compatible = "fixed-clock";
@@ -94,5 +100,25 @@ ps2: ps2@e0017400 {
 			interrupts = <5>;
 			interrupt-names = "arc_ps2_irq";
 		};
+
+		mmc@0x15000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x15000 0x400>;
+			num-slots = <1>;
+			fifo-depth = <1024>;
+			card-detect-delay = <200>;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = <7>;
+			bus-width = <4>;
+		};
+
+		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
+		uio_ev: uio@0xD0000000 {
+			compatible = "generic-uio";
+			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+			interrupts = <23>;
+		};
 	};
 };

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -16,6 +16,7 @@ CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
+# CONFIG_ARC_SMP_HALT_ON_RESET is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
@@ -56,7 +57,6 @@ CONFIG_NATIONAL_PHY=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
@@ -78,9 +78,14 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y

arch/arc/include/asm/arcregs.h

@@ -38,6 +38,9 @@
 #define ARC_REG_CLUSTER_BCR	0xcf
 #define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
 
+/* Common for ARCompact and ARCv2 status register */
+#define ARC_REG_STATUS32	0x0A
+
 /* status32 Bits Positions */
 #define STATUS_AE_BIT		5	/* Exception active */
 #define STATUS_DE_BIT		6	/* PC is in delay slot */

arch/arc/include/asm/irq.h

@@ -9,13 +9,19 @@
 #ifndef __ASM_ARC_IRQ_H
 #define __ASM_ARC_IRQ_H
 
-#define NR_CPU_IRQS	32  /* number of interrupt lines of ARC770 CPU */
+/*
-#define NR_IRQS		128 /* allow some CPU external IRQ handling */
+ * ARCv2 can support 240 interrupts in the core interrupts controllers and
+ * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most
+ * configurations of boards.
+ * This doesnt affect ARCompact, but we change it to same value
+ */
+#define NR_IRQS		512
 
 /* Platform Independent IRQs */
 #ifdef CONFIG_ISA_ARCV2
 #define IPI_IRQ		19
 #define SOFTIRQ_IRQ	21
+#define FIRST_EXT_IRQ	24
 #endif
 
 #include <linux/interrupt.h>

arch/arc/kernel/entry-arcv2.S

@@ -14,6 +14,11 @@
 #include <asm/arcregs.h>
 #include <asm/irqflags.h>
 
+; A maximum number of supported interrupts in the core interrupt controller.
+; This number is not equal to the maximum interrupt number (256) because
+; first 16 lines are reserved for exceptions and are not configurable.
+#define NR_CPU_IRQS	240
+
 	.cpu HS
 
 #define VECTOR	.word
@@ -52,7 +57,7 @@ VECTOR	handle_interrupt	; unused
 VECTOR	handle_interrupt	; (23) unused
 # End of fixed IRQs
 
-.rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
+.rept NR_CPU_IRQS - 8
 	VECTOR	handle_interrupt
 .endr
 

arch/arc/kernel/intc-arcv2.c

@@ -14,6 +14,16 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>
 
+#define NR_EXCEPTIONS	16
+
+struct bcr_irq_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
+#else
+	unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
+#endif
+};
+
 /*
  * Early Hardware specific Interrupt setup
  * -Called very early (start_kernel -> setup_arch -> setup_processor)
@@ -22,15 +32,8 @@
  */
 void arc_init_IRQ(void)
 {
-	unsigned int tmp, irq_prio;
+	unsigned int tmp, irq_prio, i;
-
+	struct bcr_irq_arcv2 irq_bcr;
-	struct irq_build {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
-#else
-		unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
-#endif
-	} irq_bcr;
 
 	struct aux_irq_ctrl {
 #ifdef CONFIG_CPU_BIG_ENDIAN
@@ -68,8 +71,18 @@ void arc_init_IRQ(void)
 		irq_prio + 1, ARCV2_IRQ_DEF_PRIO,
 		irq_bcr.firq ? " FIRQ (not used)":"");
 
+	/*
+	 * Set a default priority for all available interrupts to prevent
+	 * switching of register banks if Fast IRQ and multiple register banks
+	 * are supported by CPU.
+	 */
+	for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) {
+		write_aux_reg(AUX_IRQ_SELECT, i);
+		write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+	}
+
 	/* setup status32, don't enable intr yet as kernel doesn't want */
-	tmp = read_aux_reg(0xa);
+	tmp = read_aux_reg(ARC_REG_STATUS32);
 	tmp |= STATUS_AD_MASK | (ARCV2_IRQ_DEF_PRIO << 1);
 	tmp &= ~STATUS_IE_MASK;
 	asm volatile("kflag %0	\n"::"r"(tmp));
@@ -115,7 +128,7 @@ static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
 	 * core intc IRQs [16, 23]:
 	 * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
 	 */
-	if (hw < 24) {
+	if (hw < FIRST_EXT_IRQ) {
 		/*
 		 * A subsequent request_percpu_irq() fails if percpu_devid is
 		 * not set. That in turns sets NOAUTOEN, meaning each core needs
@@ -140,11 +153,16 @@ static int __init
 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 {
 	struct irq_domain *root_domain;
+	struct bcr_irq_arcv2 irq_bcr;
+	unsigned int nr_cpu_irqs;
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+	nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS;
 
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS, &arcv2_irq_ops, NULL);
+	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 

arch/arc/kernel/intc-compact.c

@@ -14,6 +14,7 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>
 
+#define NR_CPU_IRQS	32	/* number of irq lines coming in */
 #define TIMER0_IRQ	3	/* Fixed by ISA */
 
 /*

arch/arc/kernel/mcip.c

@@ -156,15 +156,20 @@ static void idu_set_mode(unsigned int cmn_irq, unsigned int lvl,
 	__mcip_cmd_data(CMD_IDU_SET_MODE, cmn_irq, data.word);
 }
 
-static void idu_irq_mask(struct irq_data *data)
+static void idu_irq_mask_raw(irq_hw_number_t hwirq)
 {
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&mcip_lock, flags);
-	__mcip_cmd_data(CMD_IDU_SET_MASK, data->hwirq, 1);
+	__mcip_cmd_data(CMD_IDU_SET_MASK, hwirq, 1);
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
+static void idu_irq_mask(struct irq_data *data)
+{
+	idu_irq_mask_raw(data->hwirq);
+}
+
 static void idu_irq_unmask(struct irq_data *data)
 {
 	unsigned long flags;
@@ -230,14 +235,12 @@ static struct irq_chip idu_irq_chip = {
 
 };
 
-static irq_hw_number_t idu_first_hwirq;
-
 static void idu_cascade_isr(struct irq_desc *desc)
 {
 	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
 	struct irq_chip *core_chip = irq_desc_get_chip(desc);
 	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
-	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
+	irq_hw_number_t idu_hwirq = core_hwirq - FIRST_EXT_IRQ;
 
 	chained_irq_enter(core_chip, desc);
 	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
@@ -252,23 +255,8 @@ static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t
 	return 0;
 }
 
-static int idu_irq_xlate(struct irq_domain *d, struct device_node *n,
-			 const u32 *intspec, unsigned int intsize,
-			 irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	/*
-	 * Ignore value of interrupt distribution mode for common interrupts in
-	 * IDU which resides in intspec[1] since setting an affinity using value
-	 * from Device Tree is deprecated in ARC.
-	 */
-	*out_hwirq = intspec[0];
-	*out_type = IRQ_TYPE_NONE;
-
-	return 0;
-}
-
 static const struct irq_domain_ops idu_irq_ops = {
-	.xlate	= idu_irq_xlate,
+	.xlate	= irq_domain_xlate_onecell,
 	.map	= idu_irq_map,
 };
 
@@ -283,33 +271,37 @@ static int __init
 idu_of_init(struct device_node *intc, struct device_node *parent)
 {
 	struct irq_domain *domain;
-	/* Read IDU BCR to confirm nr_irqs */
+	int nr_irqs;
-	int nr_irqs = of_irq_count(intc);
 	int i, virq;
 	struct mcip_bcr mp;
+	struct mcip_idu_bcr idu_bcr;
 
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	if (!mp.idu)
 		panic("IDU not detected, but DeviceTree using it");
 
-	pr_info("MCIP: IDU referenced from Devicetree %d irqs\n", nr_irqs);
+	READ_BCR(ARC_REG_MCIP_IDU_BCR, idu_bcr);
+	nr_irqs = mcip_idu_bcr_to_nr_irqs(idu_bcr);
+
+	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
 
 	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
 
 	/* Parent interrupts (core-intc) are already mapped */
 
 	for (i = 0; i < nr_irqs; i++) {
+		/* Mask all common interrupts by default */
+		idu_irq_mask_raw(i);
+
 		/*
 		 * Return parent uplink IRQs (towards core intc) 24,25,.....
 		 * this step has been done before already
 		 * however we need it to get the parent virq and set IDU handler
 		 * as first level isr
 		 */
-		virq = irq_of_parse_and_map(intc, i);
+		virq = irq_create_mapping(NULL, i + FIRST_EXT_IRQ);
-		if (!i)
+		BUG_ON(!virq);
-			idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq));
-
 		irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
 	}
 

arch/arc/plat-eznps/Kconfig

@@ -5,7 +5,6 @@
 
 menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
-	select ARC_HAS_COH_CACHES if SMP
 	select CPU_BIG_ENDIAN
 	select CLKSRC_NPS
 	select EZNPS_GIC

arch/arc/plat-sim/Kconfig

@@ -8,7 +8,6 @@
 
 menuconfig ARC_PLAT_SIM
 	bool "ARC nSIM based simulation virtual platforms"
-	select ARC_HAS_COH_CACHES if SMP
 	help
 	  Support for nSIM based ARC simulation platforms
 	  This includes the standalone nSIM (uart only) vs. System C OSCI VP

include/soc/arc/mcip.h

@@ -14,6 +14,7 @@
 #include <soc/arc/aux.h>
 
 #define ARC_REG_MCIP_BCR	0x0d0
+#define ARC_REG_MCIP_IDU_BCR	0x0D5
 #define ARC_REG_MCIP_CMD	0x600
 #define ARC_REG_MCIP_WDATA	0x601
 #define ARC_REG_MCIP_READBACK	0x602
@@ -69,6 +70,22 @@ struct mcip_bcr {
 #endif
 };
 
+struct mcip_idu_bcr {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:21, cirqnum:3, ver:8;
+#else
+	unsigned int ver:8, cirqnum:3, pad:21;
+#endif
+};
+
+
+/*
+ * Build register for IDU contains not an actual number of supported common
+ * interrupts but an exponent of 2 which must be multiplied by 4 to
+ * get a number of supported common interrupts.
+ */
+#define mcip_idu_bcr_to_nr_irqs(bcr) (4 * (1 << (bcr).cirqnum))
+
 /*
  * MCIP programming model
  *