AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

phy: for 4.6

Browse Source 
*) Add driver for rockchip Display Port PHY
 *) Add driver for the Rockchip SoC internal eMMC PHY
 *) Add usb-uart functionality in rockchip-usb
 *) cleanup rcar usb2 PHY driver
 *) Fix for randconfig error
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJW1oAnAAoJEA5ceFyATYLZo6QP/3gZP5FBMJFNhwKSWiu9o0J3
 /GtnpoD/SsgVQ0zGu7KJE3nO2wB0qZS26CrKbKkpF5nP2+ySjMs3X5NXTbgd0Ayo
 rLY4TeqYbYi5Xrahcl6Zf2HdszpKVZY1hHjp8OZV/PvcOqDMqtVZYUgDjh078c6U
 5R4TwokyMfScJuYguBfz6XFX+Aj8Du56Iz846gsAeV05aIRXDolY0kKUyLUN3cDW
 jCWnoDgPvFCGBpU/n8n0xA9bNX7uf/0fjp8otomznDeMtJTW+VnzT0KwPpJ0wc4M
 uL/o6zw6a1wuW1iv9XxYZhbmhLlSyrgHKCcD+MMTssAf1xwpwBI7cQ6mEYrMxnFC
 nBSSDu6iklS7p8x8iRTxFJq6zAqMC7y/hCLXRzlI3A3hKqAglEnth4TWOx/QRVgP
 Lz4pAk/pdJtU573LsInE7gBnGmZnHQOQMPD2CXfNOt8vczPiRs8o4GRgkMs2VQPU
 PmMK1IaPIPBHgz+RdGfGxSckIaXILyCwDYMnytR0GodPidarbbfaMZCrBQg/Qo0a
 eFRZKpYXF21EQSjGEXOLTI4FeGxDTeGAIPW7K/v6Zx9M8BfsEBtwTGS9WaiAqqe4
 eD/woa600w/TBOnE7eFcooR6d0uugbJAiUZdlPrCwlGZQqy5gMf87OkVwqxFNcVW
 pGQujRqVkYNmTNFRtoHW
 =mp9/
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing

Kishon writes:

phy: for 4.6

*) Add driver for rockchip Display Port PHY
*) Add driver for the Rockchip SoC internal eMMC PHY
*) Add usb-uart functionality in rockchip-usb
*) cleanup rcar usb2 PHY driver
*) Fix for randconfig error

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Greg Kroah-Hartman 2016-03-05 12:22:41 -08:00
commit a567500598
10 changed files with 658 additions and 122 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
View File

@ -7,33 +7,26 @@ Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
- reg: offset and length of the partial USB 2.0 Host register block.
- reg-names: must be "usb2_host".
- clocks: clock phandle and specifier pair(s).
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
Optional properties:
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
combined, the device tree node should set HSUSB properties to reg and reg-names
properties. This is because HSUSB has registers to select USB 2.0 host or
peripheral at that channel:
- reg: offset and length of the partial HSUSB register block.
- reg-names: must be "hsusb".
combined, the device tree node should set interrupt properties to use the
channel as USB OTG:
- interrupts: interrupt specifier for the PHY.
Example (R-Car H3):
usb-phy@ee080200 {
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
reg-names = "usb2_host", "hsusb";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
<&mstp7_clks R8A7795_CLK_HSUSB>;
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
};
usb-phy@ee0a0200 {
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee0a0200 0 0x700>;
reg-names = "usb2_host";
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
};

22
Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt Normal file
View File

@ -0,0 +1,22 @@
Rockchip specific extensions to the Analogix Display Port PHY
------------------------------------
Required properties:
- compatible : should be one of the following supported values:
- "rockchip.rk3288-dp-phy"
- clocks: from common clock binding: handle to dp clock.
of memory mapped region.
- clock-names: from common clock binding:
Required elements: "24m"
- rockchip,grf: phandle to the syscon managing the "general register files"
- #phy-cells : from the generic PHY bindings, must be 0;
Example:
edp_phy: edp-phy {
compatible = "rockchip,rk3288-dp-phy";
rockchip,grf = <&grf>;
clocks = <&cru SCLK_EDP_24M>;
clock-names = "24m";
#phy-cells = <0>;
};

19
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt Normal file
View File

@ -0,0 +1,19 @@
Rockchip EMMC PHY
-----------------------
Required properties:
- compatible: rockchip,rk3399-emmc-phy
- rockchip,grf : phandle to the syscon managing the "general
register files"
- #phy-cells: must be 0
- reg: PHY configure reg address offset in "general
register files"
Example:
emmcphy: phy {
compatible = "rockchip,rk3399-emmc-phy";
rockchip,grf = <&grf>;
reg = <0xf780>;
#phy-cells = <0>;
};

6
Documentation/kernel-parameters.txt
View File

@ -3491,6 +3491,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
ro [KNL] Mount root device read-only on boot
rockchip.usb_uart
Enable the uart passthrough on the designated usb port
on Rockchip SoCs. When active, the signals of the
debug-uart get routed to the D+ and D- pins of the usb
port and the regular usb controller gets disabled.
root= [KNL] Root filesystem
See name_to_dev_t comment in init/do_mounts.c.

16
drivers/phy/Kconfig
View File

@ -32,7 +32,7 @@ config PHY_BERLIN_SATA
config ARMADA375_USBCLUSTER_PHY
def_bool y
depends on MACH_ARMADA_375 || COMPILE_TEST
depends on OF
depends on OF && HAS_IOMEM
select GENERIC_PHY
config PHY_DM816X_USB
@ -337,6 +337,20 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
config PHY_ROCKCHIP_EMMC
tristate "Rockchip EMMC PHY Driver"
depends on ARCH_ROCKCHIP && OF
select GENERIC_PHY
help
Enable this to support the Rockchip EMMC PHY.
config PHY_ROCKCHIP_DP
tristate "Rockchip Display Port PHY Driver"
depends on ARCH_ROCKCHIP && OF
select GENERIC_PHY
help
Enable this to support the Rockchip Display Port PHY.
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY

2
drivers/phy/Makefile
View File

@ -37,6 +37,8 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o

83
drivers/phy/phy-rcar-gen3-usb2.c
View File

@ -74,20 +74,6 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
/******* HSUSB registers (original offset is +0x100) *******/
#define HSUSB_LPSTS 0x02
#define HSUSB_UGCTRL2 0x84
/* Low Power Status register (LPSTS) */
#define HSUSB_LPSTS_SUSPM 0x4000
/* USB General control register 2 (UGCTRL2) */
#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */
#define HSUSB_UGCTRL2_USB0SEL 0x00000030
#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010
#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020
#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030
struct rcar_gen3_data {
void __iomem *base;
struct clk *clk;
@ -95,8 +81,8 @@ struct rcar_gen3_data {
struct rcar_gen3_chan {
struct rcar_gen3_data usb2;
struct rcar_gen3_data hsusb;
struct phy *phy;
bool has_otg;
};
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
@ -202,24 +188,15 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->usb2.base;
void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
/* Initialize USB2 part */
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
/* Initialize HSUSB part */
if (hsusb_base) {
val = readl(hsusb_base + HSUSB_UGCTRL2);
val = (val & ~HSUSB_UGCTRL2_USB0SEL) |
HSUSB_UGCTRL2_USB0SEL_OTG;
writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2);
/* Initialize otg part */
/* Initialize otg part */
if (channel->has_otg)
rcar_gen3_init_otg(channel);
}
return 0;
}
@ -237,7 +214,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->usb2.base;
void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
val = readl(usb2_base + USB2_USBCTR);
@ -246,33 +222,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
val &= ~USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
/*
* TODO: To reduce power consuming, this driver should set the SUSPM
* after the PHY detects ID pin as peripheral.
*/
if (hsusb_base) {
/* Power on HSUSB PHY */
val = readw(hsusb_base + HSUSB_LPSTS);
val |= HSUSB_LPSTS_SUSPM;
writew(val, hsusb_base + HSUSB_LPSTS);
}
return 0;
}
static int rcar_gen3_phy_usb2_power_off(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
if (hsusb_base) {
/* Power off HSUSB PHY */
val = readw(hsusb_base + HSUSB_LPSTS);
val &= ~HSUSB_LPSTS_SUSPM;
writew(val, hsusb_base + HSUSB_LPSTS);
}
return 0;
}
@ -280,7 +229,6 @@ static struct phy_ops rcar_gen3_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.power_on = rcar_gen3_phy_usb2_power_on,
.power_off = rcar_gen3_phy_usb2_power_off,
.owner = THIS_MODULE,
};
@ -313,6 +261,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
struct rcar_gen3_chan *channel;
struct phy_provider *provider;
struct resource *res;
int irq;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
@ -323,29 +272,19 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (!channel)
return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
channel->usb2.base = devm_ioremap_resource(dev, res);
if (IS_ERR(channel->usb2.base))
return PTR_ERR(channel->usb2.base);
/* "hsusb" memory resource is optional */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb");
/* To avoid error message by devm_ioremap_resource() */
if (res) {
int irq;
channel->hsusb.base = devm_ioremap_resource(dev, res);
if (IS_ERR(channel->hsusb.base))
channel->hsusb.base = NULL;
/* call request_irq for OTG */
irq = platform_get_irq(pdev, 0);
if (irq >= 0)
irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
IRQF_SHARED, dev_name(dev),
channel);
/* call request_irq for OTG */
irq = platform_get_irq(pdev, 0);
if (irq >= 0) {
irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
IRQF_SHARED, dev_name(dev), channel);
if (irq < 0)
dev_err(dev, "No irq handler (%d)\n", irq);
channel->has_otg = true;
}
/* devm_phy_create() will call pm_runtime_enable(dev); */

151
drivers/phy/phy-rockchip-dp.c Normal file
View File

@ -0,0 +1,151 @@
/*
* Rockchip DP PHY driver
*
* Copyright (C) 2016 FuZhou Rockchip Co., Ltd.
* Author: Yakir Yang <ykk@@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#define GRF_SOC_CON12 0x0274
#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
#define GRF_EDP_PHY_SIDDQ_ON 0
#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
struct rockchip_dp_phy {
struct device *dev;
struct regmap *grf;
struct clk *phy_24m;
};
static int rockchip_set_phy_state(struct phy *phy, bool enable)
{
struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
int ret;
if (enable) {
ret = regmap_write(dp->grf, GRF_SOC_CON12,
GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
GRF_EDP_PHY_SIDDQ_ON);
if (ret < 0) {
dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
return ret;
}
ret = clk_prepare_enable(dp->phy_24m);
} else {
clk_disable_unprepare(dp->phy_24m);
ret = regmap_write(dp->grf, GRF_SOC_CON12,
GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
GRF_EDP_PHY_SIDDQ_OFF);
}
return ret;
}
static int rockchip_dp_phy_power_on(struct phy *phy)
{
return rockchip_set_phy_state(phy, true);
}
static int rockchip_dp_phy_power_off(struct phy *phy)
{
return rockchip_set_phy_state(phy, false);
}
static const struct phy_ops rockchip_dp_phy_ops = {
.power_on = rockchip_dp_phy_power_on,
.power_off = rockchip_dp_phy_power_off,
.owner = THIS_MODULE,
};
static int rockchip_dp_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
struct rockchip_dp_phy *dp;
struct phy *phy;
int ret;
if (!np)
return -ENODEV;
dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
if (IS_ERR(dp))
return -ENOMEM;
dp->dev = dev;
dp->phy_24m = devm_clk_get(dev, "24m");
if (IS_ERR(dp->phy_24m)) {
dev_err(dev, "cannot get clock 24m\n");
return PTR_ERR(dp->phy_24m);
}
ret = clk_set_rate(dp->phy_24m, 24000000);
if (ret < 0) {
dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
return ret;
}
dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
if (IS_ERR(dp->grf)) {
dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
return PTR_ERR(dp->grf);
}
ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK);
if (ret != 0) {
dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
return ret;
}
phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create phy\n");
return PTR_ERR(phy);
}
phy_set_drvdata(phy, dp);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
{ .compatible = "rockchip,rk3288-dp-phy" },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
static struct platform_driver rockchip_dp_phy_driver = {
.probe = rockchip_dp_phy_probe,
.driver = {
.name = "rockchip-dp-phy",
.of_match_table = rockchip_dp_phy_dt_ids,
},
};
module_platform_driver(rockchip_dp_phy_driver);
MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip DP PHY driver");
MODULE_LICENSE("GPL v2");

229
drivers/phy/phy-rockchip-emmc.c Normal file
View File

@ -0,0 +1,229 @@
/*
* Rockchip emmc PHY driver
*
* Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
* Copyright (C) 2016 ROCKCHIP, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
/*
* The higher 16-bit of this register is used for write protection
* only if BIT(x + 16) set to 1 the BIT(x) can be written.
*/
#define HIWORD_UPDATE(val, mask, shift) \
((val) << (shift) | (mask) << ((shift) + 16))
/* Register definition */
#define GRF_EMMCPHY_CON0 0x0
#define GRF_EMMCPHY_CON1 0x4
#define GRF_EMMCPHY_CON2 0x8
#define GRF_EMMCPHY_CON3 0xc
#define GRF_EMMCPHY_CON4 0x10
#define GRF_EMMCPHY_CON5 0x14
#define GRF_EMMCPHY_CON6 0x18
#define GRF_EMMCPHY_STATUS 0x20
#define PHYCTRL_PDB_MASK 0x1
#define PHYCTRL_PDB_SHIFT 0x0
#define PHYCTRL_PDB_PWR_ON 0x1
#define PHYCTRL_PDB_PWR_OFF 0x0
#define PHYCTRL_ENDLL_MASK 0x1
#define PHYCTRL_ENDLL_SHIFT 0x1
#define PHYCTRL_ENDLL_ENABLE 0x1
#define PHYCTRL_ENDLL_DISABLE 0x0
#define PHYCTRL_CALDONE_MASK 0x1
#define PHYCTRL_CALDONE_SHIFT 0x6
#define PHYCTRL_CALDONE_DONE 0x1
#define PHYCTRL_CALDONE_GOING 0x0
#define PHYCTRL_DLLRDY_MASK 0x1
#define PHYCTRL_DLLRDY_SHIFT 0x5
#define PHYCTRL_DLLRDY_DONE 0x1
#define PHYCTRL_DLLRDY_GOING 0x0
struct rockchip_emmc_phy {
unsigned int reg_offset;
struct regmap *reg_base;
};
static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
bool on_off)
{
unsigned int caldone;
unsigned int dllrdy;
/*
* Keep phyctrl_pdb and phyctrl_endll low to allow
* initialization of CALIO state M/C DFFs
*/
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF,
PHYCTRL_PDB_MASK,
PHYCTRL_PDB_SHIFT));
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE,
PHYCTRL_ENDLL_MASK,
PHYCTRL_ENDLL_SHIFT));
/* Already finish power_off above */
if (on_off == PHYCTRL_PDB_PWR_OFF)
return 0;
/*
* According to the user manual, calpad calibration
* cycle takes more than 2us without the minimal recommended
* value, so we may need a little margin here
*/
udelay(3);
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON,
PHYCTRL_PDB_MASK,
PHYCTRL_PDB_SHIFT));
/*
* According to the user manual, it asks driver to
* wait 5us for calpad busy trimming
*/
udelay(5);
regmap_read(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
&caldone);
caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
if (caldone != PHYCTRL_CALDONE_DONE) {
pr_err("rockchip_emmc_phy_power: caldone timeout.\n");
return -ETIMEDOUT;
}
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
PHYCTRL_ENDLL_MASK,
PHYCTRL_ENDLL_SHIFT));
/*
* After enable analog DLL circuits, we need extra 10.2us
* for dll to be ready for work.
*/
udelay(11);
regmap_read(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
&dllrdy);
dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK;
if (dllrdy != PHYCTRL_DLLRDY_DONE) {
pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n");
return -ETIMEDOUT;
}
return 0;
}
static int rockchip_emmc_phy_power_off(struct phy *phy)
{
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
int ret = 0;
/* Power down emmc phy analog blocks */
ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF);
if (ret)
return ret;
return 0;
}
static int rockchip_emmc_phy_power_on(struct phy *phy)
{
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
int ret = 0;
/* Power up emmc phy analog blocks */
ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON);
if (ret)
return ret;
return 0;
}
static const struct phy_ops ops = {
.power_on = rockchip_emmc_phy_power_on,
.power_off = rockchip_emmc_phy_power_off,
.owner = THIS_MODULE,
};
static int rockchip_emmc_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rockchip_emmc_phy *rk_phy;
struct phy *generic_phy;
struct phy_provider *phy_provider;
struct regmap *grf;
unsigned int reg_offset;
grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
if (IS_ERR(grf)) {
dev_err(dev, "Missing rockchip,grf property\n");
return PTR_ERR(grf);
}
rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
if (!rk_phy)
return -ENOMEM;
if (of_property_read_u32(dev->of_node, "reg", &reg_offset)) {
dev_err(dev, "missing reg property in node %s\n",
dev->of_node->name);
return -EINVAL;
}
rk_phy->reg_offset = reg_offset;
rk_phy->reg_base = grf;
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
if (IS_ERR(generic_phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(generic_phy);
}
phy_set_drvdata(generic_phy, rk_phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id rockchip_emmc_phy_dt_ids[] = {
{ .compatible = "rockchip,rk3399-emmc-phy" },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids);
static struct platform_driver rockchip_emmc_driver = {
.probe = rockchip_emmc_phy_probe,
.driver = {
.name = "rockchip-emmc-phy",
.of_match_table = rockchip_emmc_phy_dt_ids,
},
};
module_platform_driver(rockchip_emmc_driver);
MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip EMMC PHY driver");
MODULE_LICENSE("GPL v2");

237
drivers/phy/phy-rockchip-usb.c
View File

@ -30,21 +30,23 @@
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
/*
* The higher 16-bit of this register is used for write protection
* only if BIT(13 + 16) set to 1 the BIT(13) can be written.
*/
#define SIDDQ_WRITE_ENA BIT(29)
#define SIDDQ_ON BIT(13)
#define SIDDQ_OFF (0 << 13)
static int enable_usb_uart;
#define HIWORD_UPDATE(val, mask) \
((val) | (mask) << 16)
#define UOC_CON0_SIDDQ BIT(13)
struct rockchip_usb_phys {
int reg;
const char *pll_name;
};
struct rockchip_usb_phy_base;
struct rockchip_usb_phy_pdata {
struct rockchip_usb_phys *phys;
int (*init_usb_uart)(struct regmap *grf);
int usb_uart_phy;
};
struct rockchip_usb_phy_base {
@ -61,13 +63,15 @@ struct rockchip_usb_phy {
struct clk *clk480m;
struct clk_hw clk480m_hw;
struct phy *phy;
bool uart_enabled;
};
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
bool siddq)
{
return regmap_write(phy->base->reg_base, phy->reg_offset,
SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF));
u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ);
return regmap_write(phy->base->reg_base, phy->reg_offset, val);
}
static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
@ -108,7 +112,7 @@ static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
if (ret < 0)
return ret;
return (val & SIDDQ_ON) ? 0 : 1;
return (val & UOC_CON0_SIDDQ) ? 0 : 1;
}
static const struct clk_ops rockchip_usb_phy480m_ops = {
@ -122,6 +126,9 @@ static int rockchip_usb_phy_power_off(struct phy *_phy)
{
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
if (phy->uart_enabled)
return -EBUSY;
clk_disable_unprepare(phy->clk480m);
return 0;
@ -131,6 +138,9 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
{
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
if (phy->uart_enabled)
return -EBUSY;
return clk_prepare_enable(phy->clk480m);
}
@ -144,8 +154,10 @@ static void rockchip_usb_phy_action(void *data)
{
struct rockchip_usb_phy *rk_phy = data;
of_clk_del_provider(rk_phy->np);
clk_unregister(rk_phy->clk480m);
if (!rk_phy->uart_enabled) {
of_clk_del_provider(rk_phy->np);
clk_unregister(rk_phy->clk480m);
}
if (rk_phy->clk)
clk_put(rk_phy->clk);
@ -194,31 +206,36 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
return -EINVAL;
}
if (rk_phy->clk) {
clk_name = __clk_get_name(rk_phy->clk);
init.flags = 0;
init.parent_names = &clk_name;
init.num_parents = 1;
if (enable_usb_uart && base->pdata->usb_uart_phy == i) {
dev_dbg(base->dev, "phy%d used as uart output\n", i);
rk_phy->uart_enabled = true;
} else {
init.flags = CLK_IS_ROOT;
init.parent_names = NULL;
init.num_parents = 0;
if (rk_phy->clk) {
clk_name = __clk_get_name(rk_phy->clk);
init.flags = 0;
init.parent_names = &clk_name;
init.num_parents = 1;
} else {
init.flags = CLK_IS_ROOT;
init.parent_names = NULL;
init.num_parents = 0;
}
init.ops = &rockchip_usb_phy480m_ops;
rk_phy->clk480m_hw.init = &init;
rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
if (IS_ERR(rk_phy->clk480m)) {
err = PTR_ERR(rk_phy->clk480m);
goto err_clk;
}
err = of_clk_add_provider(child, of_clk_src_simple_get,
rk_phy->clk480m);
if (err < 0)
goto err_clk_prov;
}
init.ops = &rockchip_usb_phy480m_ops;
rk_phy->clk480m_hw.init = &init;
rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
if (IS_ERR(rk_phy->clk480m)) {
err = PTR_ERR(rk_phy->clk480m);
goto err_clk;
}
err = of_clk_add_provider(child, of_clk_src_simple_get,
rk_phy->clk480m);
if (err < 0)
goto err_clk_prov;
err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy);
if (err)
goto err_devm_action;
@ -230,13 +247,21 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
}
phy_set_drvdata(rk_phy->phy, rk_phy);
/* only power up usb phy when it use, so disable it when init*/
return rockchip_usb_phy_power(rk_phy, 1);
/*
* When acting as uart-pipe, just keep clock on otherwise
* only power up usb phy when it use, so disable it when init
*/
if (rk_phy->uart_enabled)
return clk_prepare_enable(rk_phy->clk);
else
return rockchip_usb_phy_power(rk_phy, 1);
err_devm_action:
of_clk_del_provider(child);
if (!rk_phy->uart_enabled)
of_clk_del_provider(child);
err_clk_prov:
clk_unregister(rk_phy->clk480m);
if (!rk_phy->uart_enabled)
clk_unregister(rk_phy->clk480m);
err_clk:
if (rk_phy->clk)
clk_put(rk_phy->clk);
@ -259,6 +284,86 @@ static const struct rockchip_usb_phy_pdata rk3188_pdata = {
},
};
#define RK3288_UOC0_CON0 0x320
#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0)
#define RK3288_UOC0_CON0_DISABLE BIT(4)
#define RK3288_UOC0_CON2 0x328
#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2)
#define RK3288_UOC0_CON3 0x32c
#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0)
#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1)
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6)
#define RK3288_UOC0_CON3_BYPASSSEL BIT(7)
/*
* Enable the bypass of uart2 data through the otg usb phy.
* Original description in the TRM.
* 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1.
* 2. Disable the pull-up resistance on the D+ line by setting
* OPMODE0[1:0] to 2’b01.
* 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend
* mode, set COMMONONN to 1’b1.
* 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0.
* 5. Set BYPASSSEL0 to 1’b1.
* 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0.
* To receive data, monitor FSVPLUS0.
*
* The actual code in the vendor kernel does some things differently.
*/
static int __init rk3288_init_usb_uart(struct regmap *grf)
{
u32 val;
int ret;
/*
* COMMON_ON and DISABLE settings are described in the TRM,
* but were not present in the original code.
* Also disable the analog phy components to save power.
*/
val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N
| RK3288_UOC0_CON0_DISABLE
| UOC_CON0_SIDDQ,
RK3288_UOC0_CON0_COMMON_ON_N
| RK3288_UOC0_CON0_DISABLE
| UOC_CON0_SIDDQ);
ret = regmap_write(grf, RK3288_UOC0_CON0, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL,
RK3288_UOC0_CON2_SOFT_CON_SEL);
ret = regmap_write(grf, RK3288_UOC0_CON2, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED,
RK3288_UOC0_CON3_UTMI_SUSPENDN
| RK3288_UOC0_CON3_UTMI_OPMODE_MASK
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED);
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL
| RK3288_UOC0_CON3_BYPASSDMEN,
RK3288_UOC0_CON3_BYPASSSEL
| RK3288_UOC0_CON3_BYPASSDMEN);
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
if (ret)
return ret;
return 0;
}
static const struct rockchip_usb_phy_pdata rk3288_pdata = {
.phys = (struct rockchip_usb_phys[]){
{ .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
@ -266,6 +371,8 @@ static const struct rockchip_usb_phy_pdata rk3288_pdata = {
{ .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
{ /* sentinel */ }
},
.init_usb_uart = rk3288_init_usb_uart,
.usb_uart_phy = 0,
};
static int rockchip_usb_phy_probe(struct platform_device *pdev)
@ -328,6 +435,60 @@ static struct platform_driver rockchip_usb_driver = {
module_platform_driver(rockchip_usb_driver);
#ifndef MODULE
static int __init rockchip_init_usb_uart(void)
{
const struct of_device_id *match;
const struct rockchip_usb_phy_pdata *data;
struct device_node *np;
struct regmap *grf;
int ret;
if (!enable_usb_uart)
return 0;
np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids,
&match);
if (!np) {
pr_err("%s: failed to find usbphy node\n", __func__);
return -ENOTSUPP;
}
pr_debug("%s: using settings for %s\n", __func__, match->compatible);
data = match->data;
if (!data->init_usb_uart) {
pr_err("%s: usb-uart not available on %s\n",
__func__, match->compatible);
return -ENOTSUPP;
}
grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
if (IS_ERR(grf)) {
pr_err("%s: Missing rockchip,grf property, %lu\n",
__func__, PTR_ERR(grf));
return PTR_ERR(grf);
}
ret = data->init_usb_uart(grf);
if (ret) {
pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
enable_usb_uart = 0;
return ret;
}
return 0;
}
early_initcall(rockchip_init_usb_uart);
static int __init rockchip_usb_uart(char *buf)
{
enable_usb_uart = true;
return 0;
}
early_param("rockchip.usb_uart", rockchip_usb_uart);
#endif
MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
MODULE_LICENSE("GPL v2");