i2c: iproc: fix race between client unreg and isr

When i2c client unregisters, synchronize irq before setting
iproc_i2c->slave to NULL.

(1) disable_irq()
(2) Mask event enable bits in control reg
(3) Erase slave address (avoid further writes to rx fifo)
(4) Flush tx and rx FIFOs
(5) Clear pending event (interrupt) bits in status reg
(6) enable_irq()
(7) Set client pointer to NULL

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000318

[  371.020421] pc : bcm_iproc_i2c_isr+0x530/0x11f0
[  371.025098] lr : __handle_irq_event_percpu+0x6c/0x170
[  371.030309] sp : ffff800010003e40
[  371.033727] x29: ffff800010003e40 x28: 0000000000000060
[  371.039206] x27: ffff800010ca9de0 x26: ffff800010f895df
[  371.044686] x25: ffff800010f18888 x24: ffff0008f7ff3600
[  371.050165] x23: 0000000000000003 x22: 0000000001600000
[  371.055645] x21: ffff800010f18888 x20: 0000000001600000
[  371.061124] x19: ffff0008f726f080 x18: 0000000000000000
[  371.066603] x17: 0000000000000000 x16: 0000000000000000
[  371.072082] x15: 0000000000000000 x14: 0000000000000000
[  371.077561] x13: 0000000000000000 x12: 0000000000000001
[  371.083040] x11: 0000000000000000 x10: 0000000000000040
[  371.088519] x9 : ffff800010f317c8 x8 : ffff800010f317c0
[  371.093999] x7 : ffff0008f805b3b0 x6 : 0000000000000000
[  371.099478] x5 : ffff0008f7ff36a4 x4 : ffff8008ee43d000
[  371.104957] x3 : 0000000000000000 x2 : ffff8000107d64c0
[  371.110436] x1 : 00000000c00000af x0 : 0000000000000000

[  371.115916] Call trace:
[  371.118439]  bcm_iproc_i2c_isr+0x530/0x11f0
[  371.122754]  __handle_irq_event_percpu+0x6c/0x170
[  371.127606]  handle_irq_event_percpu+0x34/0x88
[  371.132189]  handle_irq_event+0x40/0x120
[  371.136234]  handle_fasteoi_irq+0xcc/0x1a0
[  371.140459]  generic_handle_irq+0x24/0x38
[  371.144594]  __handle_domain_irq+0x60/0xb8
[  371.148820]  gic_handle_irq+0xc0/0x158
[  371.152687]  el1_irq+0xb8/0x140
[  371.155927]  arch_cpu_idle+0x10/0x18
[  371.159615]  do_idle+0x204/0x290
[  371.162943]  cpu_startup_entry+0x24/0x60
[  371.166990]  rest_init+0xb0/0xbc
[  371.170322]  arch_call_rest_init+0xc/0x14
[  371.174458]  start_kernel+0x404/0x430

Fixes: c245d94ed1 ("i2c: iproc: Add multi byte read-write support for slave mode")

Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This commit is contained in:
Dhananjay Phadke 2020-08-10 17:42:40 -07:00 committed by Wolfram Sang
parent 82c8eb2209
commit b1eef236f5

View File

@ -1078,7 +1078,7 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
if (!iproc_i2c->slave)
return -EINVAL;
iproc_i2c->slave = NULL;
disable_irq(iproc_i2c->irq);
/* disable all slave interrupts */
tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
@ -1091,6 +1091,17 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
/* flush TX/RX FIFOs */
tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp);
/* clear all pending slave interrupts */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
iproc_i2c->slave = NULL;
enable_irq(iproc_i2c->irq);
return 0;
}