AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

MIPS: MIPSsim: Remove the MIPSsim platform.

Browse Source 
The MIPSsim platform is no longer supported or used.

[ralf@linux-mips.org: Also remove mipssim from arch/mips/Kbuild.platforms
and delete arch/mips/include/asm/mach-mipssim/*.]

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4350/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Steven J. Hill 2012-09-24 09:48:53 -05:00 committed by Ralf Baechle
parent b1c561845d
commit b30fdd6f73
15 changed files with 0 additions and 845 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/mips/Kbuild.platforms
View File

@ -15,7 +15,6 @@ platforms += lantiq
platforms += lasat
platforms += loongson
platforms += loongson1
platforms += mipssim
platforms += mti-malta
platforms += netlogic
platforms += pmc-sierra

19
arch/mips/Kconfig
View File

@ -319,25 +319,6 @@ config MIPS_MALTA
This enables support for the MIPS Technologies Malta evaluation
board.
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
select BOOT_RAW
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_LITTLE_ENDIAN
help
This option enables support for MIPS Technologies MIPSsim software
emulator.
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH

64
arch/mips/configs/mipssim_defconfig
View File

@ -1,64 +0,0 @@
CONFIG_MIPS_SIM=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MIPS_SIM_NET=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
# CONFIG_CRC32 is not set

67
arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
View File

@ -1,67 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2004 Chris Dearman
*/
#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
/*
* CPU feature overrides for MIPS boards
*/
#ifdef CONFIG_CPU_MIPS32
#define cpu_has_tlb 1
#define cpu_has_4kex 1
#define cpu_has_4k_cache 1
#define cpu_has_fpu 0
/* #define cpu_has_32fpr ? */
#define cpu_has_counter 1
/* #define cpu_has_watch ? */
#define cpu_has_divec 1
#define cpu_has_vce 0
/* #define cpu_has_cache_cdex_p ? */
/* #define cpu_has_cache_cdex_s ? */
/* #define cpu_has_prefetch ? */
#define cpu_has_mcheck 1
/* #define cpu_has_ejtag ? */
#define cpu_has_llsc 1
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */
#define cpu_has_clo_clz 1
#define cpu_has_nofpuex 0
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
/* #define cpu_has_inclusive_pcaches ? */
#endif
#ifdef CONFIG_CPU_MIPS64
#define cpu_has_tlb 1
#define cpu_has_4kex 1
#define cpu_has_4k_cache 1
/* #define cpu_has_fpu ? */
/* #define cpu_has_32fpr ? */
#define cpu_has_counter 1
/* #define cpu_has_watch ? */
#define cpu_has_divec 1
#define cpu_has_vce 0
/* #define cpu_has_cache_cdex_p ? */
/* #define cpu_has_cache_cdex_s ? */
/* #define cpu_has_prefetch ? */
#define cpu_has_mcheck 1
/* #define cpu_has_ejtag ? */
#define cpu_has_llsc 1
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */
#define cpu_has_clo_clz 1
#define cpu_has_nofpuex 0
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
/* #define cpu_has_inclusive_pcaches ? */
#endif
#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */

25
arch/mips/include/asm/mach-mipssim/war.h
View File

@ -1,25 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H
#define __ASM_MIPS_MACH_MIPSSIM_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define RM9000_CDEX_SMP_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 0
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */

31
arch/mips/include/asm/mips-boards/simint.h
View File

@ -1,31 +0,0 @@
/*
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#ifndef _MIPS_SIMINT_H
#define _MIPS_SIMINT_H
#include <irq.h>
#define SIM_INT_BASE 0
#define MIPSCPU_INT_MB0 2
#define MIPS_CPU_TIMER_IRQ 7
#define MSC01E_INT_BASE 64
#define MSC01E_INT_CPUCTR 11
#endif

23
arch/mips/mipssim/Makefile
View File

@ -1,23 +0,0 @@
#
# Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
# Copyright (C) 2007 MIPS Technologies, Inc.
# written by Ralf Baechle (ralf@linux-mips.org)
#
# This program is free software; you can distribute it and/or modify it
# under the terms of the GNU General Public License (Version 2) as
# published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#
obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o
obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o

6
arch/mips/mipssim/Platform
View File

@ -1,6 +0,0 @@
#
# MIPS SIM
#
platform-$(CONFIG_MIPS_SIM) += mipssim/
cflags-$(CONFIG_MIPS_SIM) += -I$(srctree)/arch/mips/include/asm/mach-mipssim
load-$(CONFIG_MIPS_SIM) += 0x80100000

40
arch/mips/mipssim/sim_console.c
View File

@ -1,40 +0,0 @@
/*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2007 MIPS Technologies, Inc.
* written by Ralf Baechle
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/serial_reg.h>
static inline unsigned int serial_in(int offset)
{
return inb(0x3f8 + offset);
}
static inline void serial_out(int offset, int value)
{
outb(value, 0x3f8 + offset);
}
void __init prom_putchar(char c)
{
while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
;
serial_out(UART_TX, c);
}

87
arch/mips/mipssim/sim_int.c
View File

@ -1,87 +0,0 @@
/*
* Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <asm/mips-boards/simint.h>
#include <asm/irq_cpu.h>
static inline int clz(unsigned long x)
{
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
: "=r" (x)
: "r" (x));
return x;
}
/*
* Version of ffs that only looks at bits 12..15.
*/
static inline unsigned int irq_ffs(unsigned int pending)
{
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
return -clz(pending) + 31 - CAUSEB_IP;
#else
unsigned int a0 = 7;
unsigned int t0;
t0 = s0 & 0xf000;
t0 = t0 < 1;
t0 = t0 << 2;
a0 = a0 - t0;
s0 = s0 << t0;
t0 = s0 & 0xc000;
t0 = t0 < 1;
t0 = t0 << 1;
a0 = a0 - t0;
s0 = s0 << t0;
t0 = s0 & 0x8000;
t0 = t0 < 1;
/* t0 = t0 << 2; */
a0 = a0 - t0;
/* s0 = s0 << t0; */
return a0;
#endif
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
int irq;
irq = irq_ffs(pending);
if (irq > 0)
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
else
spurious_interrupt();
}
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
}

115
arch/mips/mipssim/sim_mem.c
View File

@ -1,115 +0,0 @@
/*
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/pfn.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/sections.h>
#include <asm/mips-boards/prom.h>
/*#define DEBUG*/
enum simmem_memtypes {
simmem_reserved = 0,
simmem_free,
};
struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
#ifdef DEBUG
static char *mtypes[3] = {
"SIM reserved memory",
"SIM free memory",
};
#endif
struct prom_pmemblock * __init prom_getmdesc(void)
{
unsigned int memsize;
memsize = 0x02000000;
pr_info("Setting default memory size 0x%08x\n", memsize);
memset(mdesc, 0, sizeof(mdesc));
mdesc[0].type = simmem_reserved;
mdesc[0].base = 0x00000000;
mdesc[0].size = 0x00001000;
mdesc[1].type = simmem_free;
mdesc[1].base = 0x00001000;
mdesc[1].size = 0x000ff000;
mdesc[2].type = simmem_reserved;
mdesc[2].base = 0x00100000;
mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base;
mdesc[3].type = simmem_free;
mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end));
mdesc[3].size = memsize - mdesc[3].base;
return &mdesc[0];
}
static int __init prom_memtype_classify(unsigned int type)
{
switch (type) {
case simmem_free:
return BOOT_MEM_RAM;
case simmem_reserved:
default:
return BOOT_MEM_RESERVED;
}
}
void __init prom_meminit(void)
{
struct prom_pmemblock *p;
p = prom_getmdesc();
while (p->size) {
long type;
unsigned long base, size;
type = prom_memtype_classify(p->type);
base = p->base;
size = p->size;
add_memory_region(base, size, type);
p++;
}
}
void __init prom_free_prom_memory(void)
{
int i;
unsigned long addr;
for (i = 0; i < boot_mem_map.nr_map; i++) {
if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
continue;
addr = boot_mem_map.map[i].addr;
free_init_pages("prom memory",
addr, addr + boot_mem_map.map[i].size);
}
}

35
arch/mips/mipssim/sim_platform.c
View File

@ -1,35 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 by Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/init.h>
#include <linux/if_ether.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
static char mipsnet_string[] = "mipsnet";
static struct platform_device eth1_device = {
.name = mipsnet_string,
.id = 0,
};
/*
* Create a platform device for the GPI port that receives the
* image data from the embedded camera.
*/
static int __init mipsnet_devinit(void)
{
int err;
err = platform_device_register(&eth1_device);
if (err)
printk(KERN_ERR "%s: registration failed\n", mipsnet_string);
return err;
}
device_initcall(mipsnet_devinit);

99
arch/mips/mipssim/sim_setup.c
View File

@ -1,99 +0,0 @@
/*
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
*/
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/ioport.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
#include <asm/time.h>
#include <asm/mips-boards/sim.h>
#include <asm/mips-boards/simint.h>
#include <asm/smp-ops.h>
static void __init serial_init(void);
unsigned int _isbonito;
const char *get_system_type(void)
{
return "MIPSsim";
}
void __init plat_mem_setup(void)
{
set_io_port_base(0xbfd00000);
serial_init();
}
extern struct plat_smp_ops ssmtc_smp_ops;
void __init prom_init(void)
{
set_io_port_base(0xbfd00000);
prom_meminit();
if (cpu_has_mipsmt) {
if (!register_vsmp_smp_ops())
return;
#ifdef CONFIG_MIPS_MT_SMTC
register_smp_ops(&ssmtc_smp_ops);
return;
#endif
}
register_up_smp_ops();
}
static void __init serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
struct uart_port s;
memset(&s, 0, sizeof(s));
s.iobase = 0x3f8;
/* hardware int 4 - the serial int, is CPU int 6
but poll for now */
s.irq = 0;
s.uartclk = 1843200;
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
s.iotype = UPIO_PORT;
s.regshift = 0;
s.timeout = 4;
if (early_serial_setup(&s) != 0) {
printk(KERN_ERR "Serial setup failed!\n");
}
#endif
}

116
arch/mips/mipssim/sim_smtc.c
View File

@ -1,116 +0,0 @@
/*
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
*/
/*
* Simulator Platform-specific hooks for SMTC operation
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/atomic.h>
#include <asm/cpu.h>
#include <asm/processor.h>
#include <asm/smtc.h>
#include <asm/mmu_context.h>
#include <asm/smtc_ipi.h>
/* VPE/SMP Prototype implements platform interfaces directly */
/*
* Cause the specified action to be performed on a targeted "CPU"
*/
static void ssmtc_send_ipi_single(int cpu, unsigned int action)
{
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
}
static inline void ssmtc_send_ipi_mask(const struct cpumask *mask,
unsigned int action)
{
unsigned int i;
for_each_cpu(i, mask)
ssmtc_send_ipi_single(i, action);
}
/*
* Post-config but pre-boot cleanup entry point
*/
static void __cpuinit ssmtc_init_secondary(void)
{
smtc_init_secondary();
}
/*
* SMP initialization finalization entry point
*/
static void __cpuinit ssmtc_smp_finish(void)
{
smtc_smp_finish();
}
/*
* Hook for after all CPUs are online
*/
static void ssmtc_cpus_done(void)
{
}
/*
* Platform "CPU" startup hook
*/
static void __cpuinit ssmtc_boot_secondary(int cpu, struct task_struct *idle)
{
smtc_boot_secondary(cpu, idle);
}
static void __init ssmtc_smp_setup(void)
{
if (read_c0_config3() & (1 << 2))
mipsmt_build_cpu_map(0);
}
/*
* Platform SMP pre-initialization
*/
static void ssmtc_prepare_cpus(unsigned int max_cpus)
{
/*
* As noted above, we can assume a single CPU for now
* but it may be multithreaded.
*/
if (read_c0_config3() & (1 << 2)) {
mipsmt_prepare_cpus();
}
}
struct plat_smp_ops ssmtc_smp_ops = {
.send_ipi_single = ssmtc_send_ipi_single,
.send_ipi_mask = ssmtc_send_ipi_mask,
.init_secondary = ssmtc_init_secondary,
.smp_finish = ssmtc_smp_finish,
.cpus_done = ssmtc_cpus_done,
.boot_secondary = ssmtc_boot_secondary,
.smp_setup = ssmtc_smp_setup,
.prepare_cpus = ssmtc_prepare_cpus,
};

117
arch/mips/mipssim/sim_time.c
View File

@ -1,117 +0,0 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/mc146818rtc.h>
#include <linux/smp.h>
#include <linux/timex.h>
#include <asm/hardirq.h>
#include <asm/div64.h>
#include <asm/cpu.h>
#include <asm/setup.h>
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/mc146818-time.h>
#include <asm/msc01_ic.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/simint.h>
unsigned long cpu_khz;
/*
* Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
*/
static unsigned int __init estimate_cpu_frequency(void)
{
unsigned int prid = read_c0_prid() & 0xffff00;
unsigned int count;
#if 1
/*
* hardwire the board frequency to 12MHz.
*/
if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
(prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
count = 12000000;
else
count = 6000000;
#else
unsigned int flags;
local_irq_save(flags);
/* Start counter exactly on falling edge of update flag */
while (CMOS_READ(RTC_REG_A) & RTC_UIP);
while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
/* Start r4k counter. */
write_c0_count(0);
/* Read counter exactly on falling edge of update flag */
while (CMOS_READ(RTC_REG_A) & RTC_UIP);
while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
count = read_c0_count();
/* restore interrupts */
local_irq_restore(flags);
#endif
mips_hpt_frequency = count;
if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
(prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
count *= 2;
count += 5000; /* round */
count -= count%10000;
return count;
}
static int mips_cpu_timer_irq;
static void mips_timer_dispatch(void)
{
do_IRQ(mips_cpu_timer_irq);
}
unsigned __cpuinit get_c0_compare_int(void)
{
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
return mips_cpu_timer_irq;
}
#endif
if (cpu_has_vint)
set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
return mips_cpu_timer_irq;
}
void __init plat_time_init(void)
{
unsigned int est_freq;
/* Set Data mode - binary. */
CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
est_freq = estimate_cpu_frequency();
printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
(est_freq % 1000000) * 100 / 1000000);
cpu_khz = est_freq / 1000;
}