forked from luck/tmp_suning_uos_patched
[POWERPC] 83xx: Add base support for the MPC8313E RDB
Add support for the MPC8313E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, and serial. Signed-off-by: Wilson Lo <Wilson.Lo@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kim Phillips
Kumar Gala
parent
8423200553
commit
b359049f27
219
arch/powerpc/boot/dts/mpc8313erdb.dts
Normal file
219
arch/powerpc/boot/dts/mpc8313erdb.dts
Normal file
@ -0,0 +1,219 @@
|
||||
/*
|
||||
* MPC8313E RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/ {
|
||||
model = "MPC8313ERDB";
|
||||
compatible = "MPC83xx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cpus {
|
||||
#cpus = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8313@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <20>; // 32 bytes
|
||||
i-cache-line-size = <20>; // 32 bytes
|
||||
d-cache-size = <4000>; // L1, 16K
|
||||
i-cache-size = <4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
32-bit;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <00000000 08000000>; // 128MB at 0
|
||||
};
|
||||
|
||||
soc8313@e0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#interrupt-cells = <2>;
|
||||
device_type = "soc";
|
||||
ranges = <0 e0000000 00100000>;
|
||||
reg = <e0000000 00000200>;
|
||||
bus-frequency = <0>;
|
||||
|
||||
wdt@200 {
|
||||
device_type = "watchdog";
|
||||
compatible = "mpc83xx_wdt";
|
||||
reg = <200 100>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
device_type = "i2c";
|
||||
compatible = "fsl-i2c";
|
||||
reg = <3000 100>;
|
||||
interrupts = <e 8>;
|
||||
interrupt-parent = <700>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
device_type = "i2c";
|
||||
compatible = "fsl-i2c";
|
||||
reg = <3100 100>;
|
||||
interrupts = <f 8>;
|
||||
interrupt-parent = <700>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
device_type = "spi";
|
||||
compatible = "mpc83xx_spi";
|
||||
reg = <7000 1000>;
|
||||
interrupts = <10 8>;
|
||||
interrupt-parent = <700>;
|
||||
mode = <0>;
|
||||
};
|
||||
|
||||
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||
usb@23000 {
|
||||
device_type = "usb";
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <23000 1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <700>;
|
||||
interrupts = <26 2>;
|
||||
phy_type = "utmi_wide";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
device_type = "mdio";
|
||||
compatible = "gianfar";
|
||||
reg = <24520 20>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
linux,phandle = <24520>;
|
||||
ethernet-phy@1 {
|
||||
linux,phandle = <2452001>;
|
||||
interrupt-parent = <700>;
|
||||
interrupts = <13 2>;
|
||||
reg = <1>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
ethernet-phy@4 {
|
||||
linux,phandle = <2452004>;
|
||||
interrupt-parent = <700>;
|
||||
interrupts = <14 2>;
|
||||
reg = <4>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@24000 {
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <24000 1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <25 8 24 8 23 8>;
|
||||
interrupt-parent = <700>;
|
||||
phy-handle = <2452001>;
|
||||
};
|
||||
|
||||
ethernet@25000 {
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <25000 1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <22 8 21 8 20 8>;
|
||||
interrupt-parent = <700>;
|
||||
phy-handle = <2452004>;
|
||||
};
|
||||
|
||||
serial@4500 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <4500 100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <9 8>;
|
||||
interrupt-parent = <700>;
|
||||
};
|
||||
|
||||
serial@4600 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <4600 100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <a 8>;
|
||||
interrupt-parent = <700>;
|
||||
};
|
||||
|
||||
pci@8500 {
|
||||
interrupt-map-mask = <f800 0 0 7>;
|
||||
interrupt-map = <
|
||||
|
||||
/* IDSEL 0x0E -mini PCI */
|
||||
7000 0 0 1 700 12 8
|
||||
7000 0 0 2 700 12 8
|
||||
7000 0 0 3 700 12 8
|
||||
7000 0 0 4 700 12 8
|
||||
|
||||
/* IDSEL 0x0F - PCI slot */
|
||||
7800 0 0 1 700 11 8
|
||||
7800 0 0 2 700 12 8
|
||||
7800 0 0 3 700 11 8
|
||||
7800 0 0 4 700 12 8>;
|
||||
interrupt-parent = <700>;
|
||||
interrupts = <42 8>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <02000000 0 90000000 90000000 0 10000000
|
||||
42000000 0 80000000 80000000 0 10000000
|
||||
01000000 0 00000000 e2000000 0 00100000>;
|
||||
clock-frequency = <3f940aa>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <8500 100>;
|
||||
compatible = "83xx";
|
||||
device_type = "pci";
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
device_type = "crypto";
|
||||
model = "SEC2";
|
||||
compatible = "talitos";
|
||||
reg = <30000 7000>;
|
||||
interrupts = <b 8>;
|
||||
interrupt-parent = <700>;
|
||||
/* Rev. 2.2 */
|
||||
num-channels = <1>;
|
||||
channel-fifo-len = <18>;
|
||||
exec-units-mask = <0000004c>;
|
||||
descriptor-types-mask = <0122003f>;
|
||||
};
|
||||
|
||||
/* IPIC
|
||||
* interrupts cell = <intr #, sense>
|
||||
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||
* sense == 8: Level, low assertion
|
||||
* sense == 2: Edge, high-to-low change
|
||||
*/
|
||||
pic@700 {
|
||||
linux,phandle = <700>;
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <700 100>;
|
||||
built-in;
|
||||
device_type = "ipic";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -5,6 +5,12 @@ choice
|
||||
prompt "Machine Type"
|
||||
default MPC834x_SYS
|
||||
|
||||
config MPC8313_RDB
|
||||
bool "Freescale MPC8313 RDB"
|
||||
select DEFAULT_UIMAGE
|
||||
help
|
||||
This option enables support for the MPC8313 RDB board.
|
||||
|
||||
config MPC832x_MDS
|
||||
bool "Freescale MPC832x MDS"
|
||||
select DEFAULT_UIMAGE
|
||||
@ -41,6 +47,12 @@ config MPC8360E_PB
|
||||
|
||||
endchoice
|
||||
|
||||
config PPC_MPC831x
|
||||
bool
|
||||
select PPC_UDBG_16550
|
||||
select PPC_INDIRECT_PCI
|
||||
default y if MPC8313_RDB
|
||||
|
||||
config PPC_MPC832x
|
||||
bool
|
||||
select PPC_UDBG_16550
|
||||
|
||||
@ -3,6 +3,7 @@
|
||||
#
|
||||
obj-y := misc.o
|
||||
obj-$(CONFIG_PCI) += pci.o
|
||||
obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
|
||||
obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
|
||||
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
|
||||
obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
|
||||
|
||||
99
arch/powerpc/platforms/83xx/mpc8313_rdb.c
Normal file
99
arch/powerpc/platforms/83xx/mpc8313_rdb.c
Normal file
@ -0,0 +1,99 @@
|
||||
/*
|
||||
* arch/powerpc/platforms/83xx/mpc8313_rdb.c
|
||||
*
|
||||
* Description: MPC8313x RDB board specific routines.
|
||||
* This file is based on mpc834x_sys.c
|
||||
* Author: Lo Wlison <r43300@freescale.com>
|
||||
*
|
||||
* Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/ipic.h>
|
||||
#include <asm/udbg.h>
|
||||
|
||||
#include "mpc83xx.h"
|
||||
|
||||
#undef DEBUG
|
||||
#ifdef DEBUG
|
||||
#define DBG(fmt...) udbg_printf(fmt)
|
||||
#else
|
||||
#define DBG(fmt...)
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_PCI
|
||||
unsigned long isa_io_base = 0;
|
||||
unsigned long isa_mem_base = 0;
|
||||
#endif
|
||||
|
||||
/* ************************************************************************
|
||||
*
|
||||
* Setup the architecture
|
||||
*
|
||||
*/
|
||||
static void __init mpc8313_rdb_setup_arch(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
|
||||
add_bridge(np);
|
||||
|
||||
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
|
||||
#endif
|
||||
}
|
||||
|
||||
void __init mpc8313_rdb_init_IRQ(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
np = of_find_node_by_type(NULL, "ipic");
|
||||
if (!np)
|
||||
return;
|
||||
|
||||
ipic_init(np, 0);
|
||||
|
||||
/* Initialize the default interrupt mapping priorities,
|
||||
* in case the boot rom changed something on us.
|
||||
*/
|
||||
ipic_set_default_priority();
|
||||
}
|
||||
|
||||
/*
|
||||
* Called very early, MMU is off, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init mpc8313_rdb_probe(void)
|
||||
{
|
||||
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
|
||||
"model", NULL);
|
||||
if (model == NULL)
|
||||
return 0;
|
||||
if (strcmp(model, "MPC8313ERDB"))
|
||||
return 0;
|
||||
|
||||
DBG("MPC8313 RDB found\n");
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
define_machine(mpc8313_rdb) {
|
||||
.name = "MPC8313 RDB",
|
||||
.probe = mpc8313_rdb_probe,
|
||||
.setup_arch = mpc8313_rdb_setup_arch,
|
||||
.init_IRQ = mpc8313_rdb_init_IRQ,
|
||||
.get_irq = ipic_get_irq,
|
||||
.restart = mpc83xx_restart,
|
||||
.time_init = mpc83xx_time_init,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user