forked from luck/tmp_suning_uos_patched
[WATCHDOG] w83977f-watchdog-driver.patch
In a project for my company I've needed to use the watchdog device in a PCM-5335 SBC from AAEON. The watchdog timer is from a Winbond's SuperIO chip, the W83977F. I've made this driver based on two others already on the kernel tree, the w83877f_wdt and the wdt977. Signed-off-by: Jose Goncalves <jose.goncalves@inov.pt> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Jose Miguel Goncalves
Wim Van Sebroeck
parent
3809ad384a
commit
b4cc4aa24c
@ -360,6 +360,19 @@ config W83877F_WDT
|
||||
|
||||
Most people will say N.
|
||||
|
||||
config W83977F_WDT
|
||||
tristate "W83977F (PCM-5335) Watchdog Timer"
|
||||
depends on WATCHDOG && X86
|
||||
---help---
|
||||
This is the driver for the hardware watchdog on the W83977F I/O chip
|
||||
as used in AAEON's PCM-5335 SBC (and likely others). This
|
||||
watchdog simply watches your kernel to make sure it doesn't freeze,
|
||||
and if it does, it reboots your computer after a certain amount of
|
||||
time.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called w83977f_wdt.
|
||||
|
||||
config MACHZ_WDT
|
||||
tristate "ZF MachZ Watchdog"
|
||||
depends on WATCHDOG && X86
|
||||
|
||||
@ -49,6 +49,7 @@ obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
|
||||
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
|
||||
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
|
||||
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
|
||||
obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
|
||||
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
|
||||
|
||||
# PowerPC Architecture
|
||||
|
||||
548
drivers/char/watchdog/w83977f_wdt.c
Normal file
548
drivers/char/watchdog/w83977f_wdt.c
Normal file
@ -0,0 +1,548 @@
|
||||
/*
|
||||
* W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip
|
||||
*
|
||||
* (c) Copyright 2005 Jose Goncalves <jose.goncalves@inov.pt>
|
||||
*
|
||||
* Based on w83877f_wdt.c by Scott Jennings,
|
||||
* and wdt977.c by Woody Suwalski
|
||||
*
|
||||
* -----------------------
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/config.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/miscdevice.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/watchdog.h>
|
||||
#include <linux/notifier.h>
|
||||
#include <linux/reboot.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/uaccess.h>
|
||||
|
||||
#define WATCHDOG_VERSION "1.00"
|
||||
#define WATCHDOG_NAME "W83977F WDT"
|
||||
#define PFX WATCHDOG_NAME ": "
|
||||
#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
|
||||
|
||||
#define IO_INDEX_PORT 0x3F0
|
||||
#define IO_DATA_PORT (IO_INDEX_PORT+1)
|
||||
|
||||
#define UNLOCK_DATA 0x87
|
||||
#define LOCK_DATA 0xAA
|
||||
#define DEVICE_REGISTER 0x07
|
||||
|
||||
#define DEFAULT_TIMEOUT 45 /* default timeout in seconds */
|
||||
|
||||
static int timeout = DEFAULT_TIMEOUT;
|
||||
static int timeoutW; /* timeout in watchdog counter units */
|
||||
static unsigned long timer_alive;
|
||||
static int testmode;
|
||||
static char expect_close;
|
||||
static spinlock_t spinlock;
|
||||
|
||||
module_param(timeout, int, 0);
|
||||
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
|
||||
module_param(testmode, int, 0);
|
||||
MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
|
||||
|
||||
#ifdef CONFIG_WATCHDOG_NOWAYOUT
|
||||
static int nowayout = 1;
|
||||
#else
|
||||
static int nowayout = 0;
|
||||
#endif
|
||||
|
||||
module_param(nowayout, int, 0);
|
||||
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
|
||||
|
||||
/*
|
||||
* Start the watchdog
|
||||
*/
|
||||
|
||||
static int wdt_start(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&spinlock, flags);
|
||||
|
||||
/* Unlock the SuperIO chip */
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
/*
|
||||
* Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
|
||||
* F2 has the timeout in watchdog counter units.
|
||||
* F3 is set to enable watchdog LED blink at timeout.
|
||||
* F4 is used to just clear the TIMEOUT'ed state (bit 0).
|
||||
*/
|
||||
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
|
||||
outb_p(0x08,IO_DATA_PORT);
|
||||
outb_p(0xF2,IO_INDEX_PORT);
|
||||
outb_p(timeoutW,IO_DATA_PORT);
|
||||
outb_p(0xF3,IO_INDEX_PORT);
|
||||
outb_p(0x08,IO_DATA_PORT);
|
||||
outb_p(0xF4,IO_INDEX_PORT);
|
||||
outb_p(0x00,IO_DATA_PORT);
|
||||
|
||||
/* Set device Aux2 active */
|
||||
outb_p(0x30,IO_INDEX_PORT);
|
||||
outb_p(0x01,IO_DATA_PORT);
|
||||
|
||||
/*
|
||||
* Select device Aux1 (dev=7) to set GP16 as the watchdog output
|
||||
* (in reg E6) and GP13 as the watchdog LED output (in reg E3).
|
||||
* Map GP16 at pin 119.
|
||||
* In test mode watch the bit 0 on F4 to indicate "triggered" or
|
||||
* check watchdog LED on SBC.
|
||||
*/
|
||||
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
|
||||
outb_p(0x07,IO_DATA_PORT);
|
||||
if (!testmode)
|
||||
{
|
||||
unsigned pin_map;
|
||||
|
||||
outb_p(0xE6,IO_INDEX_PORT);
|
||||
outb_p(0x0A,IO_DATA_PORT);
|
||||
outb_p(0x2C,IO_INDEX_PORT);
|
||||
pin_map = inb_p(IO_DATA_PORT);
|
||||
pin_map |= 0x10;
|
||||
pin_map &= ~(0x20);
|
||||
outb_p(0x2C,IO_INDEX_PORT);
|
||||
outb_p(pin_map,IO_DATA_PORT);
|
||||
}
|
||||
outb_p(0xE3,IO_INDEX_PORT);
|
||||
outb_p(0x08,IO_DATA_PORT);
|
||||
|
||||
/* Set device Aux1 active */
|
||||
outb_p(0x30,IO_INDEX_PORT);
|
||||
outb_p(0x01,IO_DATA_PORT);
|
||||
|
||||
/* Lock the SuperIO chip */
|
||||
outb_p(LOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
spin_unlock_irqrestore(&spinlock, flags);
|
||||
|
||||
printk(KERN_INFO PFX "activated.\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Stop the watchdog
|
||||
*/
|
||||
|
||||
static int wdt_stop(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&spinlock, flags);
|
||||
|
||||
/* Unlock the SuperIO chip */
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
/*
|
||||
* Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
|
||||
* F2 is reset to its default value (watchdog timer disabled).
|
||||
* F3 is reset to its default state.
|
||||
* F4 clears the TIMEOUT'ed state (bit 0) - back to default.
|
||||
*/
|
||||
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
|
||||
outb_p(0x08,IO_DATA_PORT);
|
||||
outb_p(0xF2,IO_INDEX_PORT);
|
||||
outb_p(0xFF,IO_DATA_PORT);
|
||||
outb_p(0xF3,IO_INDEX_PORT);
|
||||
outb_p(0x00,IO_DATA_PORT);
|
||||
outb_p(0xF4,IO_INDEX_PORT);
|
||||
outb_p(0x00,IO_DATA_PORT);
|
||||
outb_p(0xF2,IO_INDEX_PORT);
|
||||
outb_p(0x00,IO_DATA_PORT);
|
||||
|
||||
/*
|
||||
* Select device Aux1 (dev=7) to set GP16 (in reg E6) and
|
||||
* Gp13 (in reg E3) as inputs.
|
||||
*/
|
||||
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
|
||||
outb_p(0x07,IO_DATA_PORT);
|
||||
if (!testmode)
|
||||
{
|
||||
outb_p(0xE6,IO_INDEX_PORT);
|
||||
outb_p(0x01,IO_DATA_PORT);
|
||||
}
|
||||
outb_p(0xE3,IO_INDEX_PORT);
|
||||
outb_p(0x01,IO_DATA_PORT);
|
||||
|
||||
/* Lock the SuperIO chip */
|
||||
outb_p(LOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
spin_unlock_irqrestore(&spinlock, flags);
|
||||
|
||||
printk(KERN_INFO PFX "shutdown.\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Send a keepalive ping to the watchdog
|
||||
* This is done by simply re-writing the timeout to reg. 0xF2
|
||||
*/
|
||||
|
||||
static int wdt_keepalive(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&spinlock, flags);
|
||||
|
||||
/* Unlock the SuperIO chip */
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
/* Select device Aux2 (device=8) to kick watchdog reg F2 */
|
||||
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
|
||||
outb_p(0x08,IO_DATA_PORT);
|
||||
outb_p(0xF2,IO_INDEX_PORT);
|
||||
outb_p(timeoutW,IO_DATA_PORT);
|
||||
|
||||
/* Lock the SuperIO chip */
|
||||
outb_p(LOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
spin_unlock_irqrestore(&spinlock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set the watchdog timeout value
|
||||
*/
|
||||
|
||||
static int wdt_set_timeout(int t)
|
||||
{
|
||||
int tmrval;
|
||||
|
||||
/*
|
||||
* Convert seconds to watchdog counter time units, rounding up.
|
||||
* On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup
|
||||
* value. This information is supplied in the PCM-5335 manual and was
|
||||
* checked by me on a real board. This is a bit strange because W83977f
|
||||
* datasheet says counter unit is in minutes!
|
||||
*/
|
||||
if (t < 15)
|
||||
return -EINVAL;
|
||||
|
||||
tmrval = ((t + 15) + 29) / 30;
|
||||
|
||||
if (tmrval > 255)
|
||||
return -EINVAL;
|
||||
|
||||
/*
|
||||
* timeout is the timeout in seconds,
|
||||
* timeoutW is the timeout in watchdog counter units.
|
||||
*/
|
||||
timeoutW = tmrval;
|
||||
timeout = (timeoutW * 30) - 15;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Get the watchdog status
|
||||
*/
|
||||
|
||||
static int wdt_get_status(int *status)
|
||||
{
|
||||
int new_status;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&spinlock, flags);
|
||||
|
||||
/* Unlock the SuperIO chip */
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
/* Select device Aux2 (device=8) to read watchdog reg F4 */
|
||||
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
|
||||
outb_p(0x08,IO_DATA_PORT);
|
||||
outb_p(0xF4,IO_INDEX_PORT);
|
||||
new_status = inb_p(IO_DATA_PORT);
|
||||
|
||||
/* Lock the SuperIO chip */
|
||||
outb_p(LOCK_DATA,IO_INDEX_PORT);
|
||||
|
||||
spin_unlock_irqrestore(&spinlock, flags);
|
||||
|
||||
*status = 0;
|
||||
if (new_status & 1)
|
||||
*status |= WDIOF_CARDRESET;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* /dev/watchdog handling
|
||||
*/
|
||||
|
||||
static int wdt_open(struct inode *inode, struct file *file)
|
||||
{
|
||||
/* If the watchdog is alive we don't need to start it again */
|
||||
if( test_and_set_bit(0, &timer_alive) )
|
||||
return -EBUSY;
|
||||
|
||||
if (nowayout)
|
||||
__module_get(THIS_MODULE);
|
||||
|
||||
wdt_start();
|
||||
return nonseekable_open(inode, file);
|
||||
}
|
||||
|
||||
static int wdt_release(struct inode *inode, struct file *file)
|
||||
{
|
||||
/*
|
||||
* Shut off the timer.
|
||||
* Lock it in if it's a module and we set nowayout
|
||||
*/
|
||||
if (expect_close == 42)
|
||||
{
|
||||
wdt_stop();
|
||||
clear_bit(0, &timer_alive);
|
||||
} else {
|
||||
wdt_keepalive();
|
||||
printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
|
||||
}
|
||||
expect_close = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* wdt_write:
|
||||
* @file: file handle to the watchdog
|
||||
* @buf: buffer to write (unused as data does not matter here
|
||||
* @count: count of bytes
|
||||
* @ppos: pointer to the position to write. No seeks allowed
|
||||
*
|
||||
* A write to a watchdog device is defined as a keepalive signal. Any
|
||||
* write of data will do, as we we don't define content meaning.
|
||||
*/
|
||||
|
||||
static ssize_t wdt_write(struct file *file, const char __user *buf,
|
||||
size_t count, loff_t *ppos)
|
||||
{
|
||||
/* See if we got the magic character 'V' and reload the timer */
|
||||
if(count)
|
||||
{
|
||||
if (!nowayout)
|
||||
{
|
||||
size_t ofs;
|
||||
|
||||
/* note: just in case someone wrote the magic character long ago */
|
||||
expect_close = 0;
|
||||
|
||||
/* scan to see whether or not we got the magic character */
|
||||
for(ofs = 0; ofs != count; ofs++)
|
||||
{
|
||||
char c;
|
||||
if (get_user(c, buf + ofs))
|
||||
return -EFAULT;
|
||||
if (c == 'V') {
|
||||
expect_close = 42;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* someone wrote to us, we should restart timer */
|
||||
wdt_keepalive();
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
/*
|
||||
* wdt_ioctl:
|
||||
* @inode: inode of the device
|
||||
* @file: file handle to the device
|
||||
* @cmd: watchdog command
|
||||
* @arg: argument pointer
|
||||
*
|
||||
* The watchdog API defines a common set of functions for all watchdogs
|
||||
* according to their available features.
|
||||
*/
|
||||
|
||||
static struct watchdog_info ident = {
|
||||
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
|
||||
.firmware_version = 1,
|
||||
.identity = WATCHDOG_NAME,
|
||||
};
|
||||
|
||||
static int wdt_ioctl(struct inode *inode, struct file *file,
|
||||
unsigned int cmd, unsigned long arg)
|
||||
{
|
||||
int status;
|
||||
int new_options, retval = -EINVAL;
|
||||
int new_timeout;
|
||||
union {
|
||||
struct watchdog_info __user *ident;
|
||||
int __user *i;
|
||||
} uarg;
|
||||
|
||||
uarg.i = (int __user *)arg;
|
||||
|
||||
switch(cmd)
|
||||
{
|
||||
default:
|
||||
return -ENOIOCTLCMD;
|
||||
|
||||
case WDIOC_GETSUPPORT:
|
||||
return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
|
||||
|
||||
case WDIOC_GETSTATUS:
|
||||
wdt_get_status(&status);
|
||||
return put_user(status, uarg.i);
|
||||
|
||||
case WDIOC_GETBOOTSTATUS:
|
||||
return put_user(0, uarg.i);
|
||||
|
||||
case WDIOC_KEEPALIVE:
|
||||
wdt_keepalive();
|
||||
return 0;
|
||||
|
||||
case WDIOC_SETOPTIONS:
|
||||
if (get_user (new_options, uarg.i))
|
||||
return -EFAULT;
|
||||
|
||||
if (new_options & WDIOS_DISABLECARD) {
|
||||
wdt_stop();
|
||||
retval = 0;
|
||||
}
|
||||
|
||||
if (new_options & WDIOS_ENABLECARD) {
|
||||
wdt_start();
|
||||
retval = 0;
|
||||
}
|
||||
|
||||
return retval;
|
||||
|
||||
case WDIOC_SETTIMEOUT:
|
||||
if (get_user(new_timeout, uarg.i))
|
||||
return -EFAULT;
|
||||
|
||||
if (wdt_set_timeout(new_timeout))
|
||||
return -EINVAL;
|
||||
|
||||
wdt_keepalive();
|
||||
/* Fall */
|
||||
|
||||
case WDIOC_GETTIMEOUT:
|
||||
return put_user(timeout, uarg.i);
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
|
||||
void *unused)
|
||||
{
|
||||
if (code==SYS_DOWN || code==SYS_HALT)
|
||||
wdt_stop();
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
static struct file_operations wdt_fops=
|
||||
{
|
||||
.owner = THIS_MODULE,
|
||||
.llseek = no_llseek,
|
||||
.write = wdt_write,
|
||||
.ioctl = wdt_ioctl,
|
||||
.open = wdt_open,
|
||||
.release = wdt_release,
|
||||
};
|
||||
|
||||
static struct miscdevice wdt_miscdev=
|
||||
{
|
||||
.minor = WATCHDOG_MINOR,
|
||||
.name = "watchdog",
|
||||
.fops = &wdt_fops,
|
||||
};
|
||||
|
||||
static struct notifier_block wdt_notifier = {
|
||||
.notifier_call = wdt_notify_sys,
|
||||
};
|
||||
|
||||
static int __init w83977f_wdt_init(void)
|
||||
{
|
||||
int rc;
|
||||
|
||||
printk(KERN_INFO PFX DRIVER_VERSION);
|
||||
|
||||
spin_lock_init(&spinlock);
|
||||
|
||||
/*
|
||||
* Check that the timeout value is within it's range ;
|
||||
* if not reset to the default
|
||||
*/
|
||||
if (wdt_set_timeout(timeout)) {
|
||||
wdt_set_timeout(DEFAULT_TIMEOUT);
|
||||
printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
|
||||
DEFAULT_TIMEOUT);
|
||||
}
|
||||
|
||||
if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
|
||||
{
|
||||
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
|
||||
IO_INDEX_PORT);
|
||||
rc = -EIO;
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
rc = misc_register(&wdt_miscdev);
|
||||
if (rc)
|
||||
{
|
||||
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
|
||||
wdt_miscdev.minor, rc);
|
||||
goto err_out_region;
|
||||
}
|
||||
|
||||
rc = register_reboot_notifier(&wdt_notifier);
|
||||
if (rc)
|
||||
{
|
||||
printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
|
||||
rc);
|
||||
goto err_out_miscdev;
|
||||
}
|
||||
|
||||
printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
|
||||
timeout, nowayout, testmode);
|
||||
|
||||
return 0;
|
||||
|
||||
err_out_miscdev:
|
||||
misc_deregister(&wdt_miscdev);
|
||||
err_out_region:
|
||||
release_region(IO_INDEX_PORT,2);
|
||||
err_out:
|
||||
return rc;
|
||||
}
|
||||
|
||||
static void __exit w83977f_wdt_exit(void)
|
||||
{
|
||||
wdt_stop();
|
||||
misc_deregister(&wdt_miscdev);
|
||||
unregister_reboot_notifier(&wdt_notifier);
|
||||
release_region(IO_INDEX_PORT,2);
|
||||
}
|
||||
|
||||
module_init(w83977f_wdt_init);
|
||||
module_exit(w83977f_wdt_exit);
|
||||
|
||||
MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>");
|
||||
MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
||||
Loading…
Reference in New Issue
Block a user