forked from luck/tmp_suning_uos_patched
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
In order to automate the verification of DT nodes convert ti,sci-intr.txt ti,sci-intr.yaml. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200806074826.24607-6-lokeshvutla@ti.com
This commit is contained in:
Lokesh Vutla
Marc Zyngier
parent
9a8e2ae71f
commit
b8713af858
|
|
@ -1,83 +0,0 @@
|
|||
Texas Instruments K3 Interrupt Router
|
||||
=====================================
|
||||
|
||||
The Interrupt Router (INTR) module provides a mechanism to mux M
|
||||
interrupt inputs to N interrupt outputs, where all M inputs are selectable
|
||||
to be driven per N output. An Interrupt Router can either handle edge triggered
|
||||
or level triggered interrupts and that is fixed in hardware.
|
||||
|
||||
Interrupt Router
|
||||
+----------------------+
|
||||
| Inputs Outputs |
|
||||
+-------+ | +------+ +-----+ |
|
||||
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
|
||||
+-------+ | +------+ +-----+ | controller
|
||||
| . . | +-------+
|
||||
+-------+ | . . |----->| IRQ |
|
||||
| INTA |----------->| . . | +-------+
|
||||
+-------+ | . +-----+ |
|
||||
| +------+ | N | |
|
||||
| | irqM | +-----+ |
|
||||
| +------+ |
|
||||
| |
|
||||
+----------------------+
|
||||
|
||||
There is one register per output (MUXCNTL_N) that controls the selection.
|
||||
Configuration of these MUXCNTL_N registers is done by a system controller
|
||||
(like the Device Memory and Security Controller on K3 AM654 SoC). System
|
||||
controller will keep track of the used and unused registers within the Router.
|
||||
Driver should request the system controller to get the range of GIC IRQs
|
||||
assigned to the requesting hosts. It is the drivers responsibility to keep
|
||||
track of Host IRQs.
|
||||
|
||||
Communication between the host processor running an OS and the system
|
||||
controller happens through a protocol called TI System Control Interface
|
||||
(TISCI protocol). For more details refer:
|
||||
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
|
||||
|
||||
TISCI Interrupt Router Node:
|
||||
----------------------------
|
||||
Required Properties:
|
||||
- compatible: Must be "ti,sci-intr".
|
||||
- ti,intr-trigger-type: Should be one of the following:
|
||||
1: If intr supports edge triggered interrupts.
|
||||
4: If intr supports level triggered interrupts.
|
||||
- interrupt-controller: Identifies the node as an interrupt controller
|
||||
- #interrupt-cells: Specifies the number of cells needed to encode an
|
||||
interrupt source. The value should be 1.
|
||||
First cell should contain interrupt router input number
|
||||
as specified by hardware.
|
||||
- ti,sci: Phandle to TI-SCI compatible System controller node.
|
||||
- ti,sci-dev-id: TISCI device id of interrupt controller.
|
||||
- ti,interrupt-ranges: Set of triplets containing ranges that convert
|
||||
the INTR output interrupt numbers to parent's
|
||||
interrupt number. Each triplet has following entries:
|
||||
- First entry specifies the base for intr output irq
|
||||
- Second entry specifies the base for parent irqs
|
||||
- Third entry specifies the limit
|
||||
|
||||
For more details on TISCI IRQ resource management refer:
|
||||
https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
|
||||
|
||||
Example:
|
||||
--------
|
||||
The following example demonstrates both interrupt router node and the consumer
|
||||
node(main gpio) on the AM654 SoC:
|
||||
|
||||
main_gpio_intr: interrupt-controller0 {
|
||||
compatible = "ti,sci-intr";
|
||||
ti,intr-trigger-type = <1>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic500>;
|
||||
#interrupt-cells = <1>;
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <131>;
|
||||
ti,interrupt-ranges = <0 360 32>;
|
||||
};
|
||||
|
||||
main_gpio0: gpio@600000 {
|
||||
...
|
||||
interrupt-parent = <&main_gpio_intr>;
|
||||
interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
|
||||
...
|
||||
};
|
||||
|
|
@ -0,0 +1,102 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Texas Instruments K3 Interrupt Router
|
||||
|
||||
maintainers:
|
||||
- Lokesh Vutla <lokeshvutla@ti.com>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
|
||||
|
||||
description: |
|
||||
The Interrupt Router (INTR) module provides a mechanism to mux M
|
||||
interrupt inputs to N interrupt outputs, where all M inputs are selectable
|
||||
to be driven per N output. An Interrupt Router can either handle edge
|
||||
triggered or level triggered interrupts and that is fixed in hardware.
|
||||
|
||||
Interrupt Router
|
||||
+----------------------+
|
||||
| Inputs Outputs |
|
||||
+-------+ | +------+ +-----+ |
|
||||
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
|
||||
+-------+ | +------+ +-----+ | controller
|
||||
| . . | +-------+
|
||||
+-------+ | . . |----->| IRQ |
|
||||
| INTA |----------->| . . | +-------+
|
||||
+-------+ | . +-----+ |
|
||||
| +------+ | N | |
|
||||
| | irqM | +-----+ |
|
||||
| +------+ |
|
||||
| |
|
||||
+----------------------+
|
||||
|
||||
There is one register per output (MUXCNTL_N) that controls the selection.
|
||||
Configuration of these MUXCNTL_N registers is done by a system controller
|
||||
(like the Device Memory and Security Controller on K3 AM654 SoC). System
|
||||
controller will keep track of the used and unused registers within the Router.
|
||||
Driver should request the system controller to get the range of GIC IRQs
|
||||
assigned to the requesting hosts. It is the drivers responsibility to keep
|
||||
track of Host IRQs.
|
||||
|
||||
Communication between the host processor running an OS and the system
|
||||
controller happens through a protocol called TI System Control Interface
|
||||
(TISCI protocol).
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ti,sci-intr
|
||||
|
||||
ti,intr-trigger-type:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 4]
|
||||
description: |
|
||||
Should be one of the following.
|
||||
1 = If intr supports edge triggered interrupts.
|
||||
4 = If intr supports level triggered interrupts.
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 1
|
||||
description: |
|
||||
The 1st cell should contain interrupt router input hw number.
|
||||
|
||||
ti,interrupt-ranges:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
||||
description: |
|
||||
Interrupt ranges that converts the INTR output hw irq numbers
|
||||
to parents's input interrupt numbers.
|
||||
items:
|
||||
items:
|
||||
- description: |
|
||||
"output_irq" specifies the base for intr output irq
|
||||
- description: |
|
||||
"parent's input irq" specifies the base for parent irq
|
||||
- description: |
|
||||
"limit" specifies the limit for translation
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- ti,intr-trigger-type
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
- ti,sci
|
||||
- ti,sci-dev-id
|
||||
- ti,interrupt-ranges
|
||||
|
||||
examples:
|
||||
- |
|
||||
main_gpio_intr: interrupt-controller0 {
|
||||
compatible = "ti,sci-intr";
|
||||
ti,intr-trigger-type = <1>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic500>;
|
||||
#interrupt-cells = <1>;
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <131>;
|
||||
ti,interrupt-ranges = <0 360 32>;
|
||||
};
|
||||
|
|
@ -17117,7 +17117,7 @@ F: Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
|
|||
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
|
||||
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
|
||||
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
|
||||
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
|
||||
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
|
||||
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
|
||||
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
|
||||
F: drivers/clk/keystone/sci-clk.c
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user