forked from luck/tmp_suning_uos_patched
regulator: add support for regulators on the ab8500 MFD
Hi Mark, > I think that's everything. Please find the updated patch set as below. >From f4bf7eec4d210db5075c0bce4521d9be6bc76c8c Mon Sep 17 00:00:00 2001 From: Sundar R Iyer <sundar.iyer@stericsson.com> Date: Sun, 6 Jun 2010 19:12:12 +0530 Subject: [PATCH v3 1/2] regulator: add support for regulators on the ab8500 MFD Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Sundar R IYER
Liam Girdwood
parent
549931f99e
commit
c789ca202c
@ -221,5 +221,13 @@ config REGULATOR_AD5398
|
||||
help
|
||||
This driver supports AD5398 and AD5821 current regulator chips.
|
||||
If building into module, its name is ad5398.ko.
|
||||
|
||||
config REGULATOR_AB8500
|
||||
bool "ST-Ericsson AB8500 Power Regulators"
|
||||
depends on AB8500_CORE
|
||||
help
|
||||
This driver supports the regulators found on the ST-Ericsson mixed
|
||||
signal AB8500 PMIC
|
||||
|
||||
endif
|
||||
|
||||
|
||||
@ -34,5 +34,6 @@ obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
|
||||
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
|
||||
|
||||
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
|
||||
|
||||
427
drivers/regulator/ab8500.c
Normal file
427
drivers/regulator/ab8500.c
Normal file
@ -0,0 +1,427 @@
|
||||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2010
|
||||
*
|
||||
* License Terms: GNU General Public License v2
|
||||
*
|
||||
* Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
|
||||
*
|
||||
* AB8500 peripheral regulators
|
||||
*
|
||||
* AB8500 supports the following regulators,
|
||||
* LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
|
||||
* VAUX1/2/3, VANA
|
||||
*
|
||||
* for DB8500 cut 1.0 and previous versions of the silicon, all accesses
|
||||
* to registers are through the DB8500 SPI. In cut 1.1 onwards, these
|
||||
* accesses are through the DB8500 PRCMU I2C
|
||||
*
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/ab8500.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/ab8500.h>
|
||||
|
||||
/**
|
||||
* struct ab8500_regulator_info - ab8500 regulator information
|
||||
* @desc: regulator description
|
||||
* @ab8500: ab8500 parent
|
||||
* @regulator_dev: regulator device
|
||||
* @max_uV: maximum voltage (for variable voltage supplies)
|
||||
* @min_uV: minimum voltage (for variable voltage supplies)
|
||||
* @fixed_uV: typical voltage (for fixed voltage supplies)
|
||||
* @update_reg: register to control on/off
|
||||
* @mask: mask to enable/disable regulator
|
||||
* @enable: bits to enable the regulator in normal(high power) mode
|
||||
* @voltage_reg: register to control regulator voltage
|
||||
* @voltage_mask: mask to control regulator voltage
|
||||
* @supported_voltages: supported voltage table
|
||||
* @voltages_len: number of supported voltages for the regulator
|
||||
*/
|
||||
struct ab8500_regulator_info {
|
||||
struct device *dev;
|
||||
struct regulator_desc desc;
|
||||
struct ab8500 *ab8500;
|
||||
struct regulator_dev *regulator;
|
||||
int max_uV;
|
||||
int min_uV;
|
||||
int fixed_uV;
|
||||
int update_reg;
|
||||
int mask;
|
||||
int enable;
|
||||
int voltage_reg;
|
||||
int voltage_mask;
|
||||
int const *supported_voltages;
|
||||
int voltages_len;
|
||||
};
|
||||
|
||||
/* voltage tables for the vauxn/vintcore supplies */
|
||||
static const int ldo_vauxn_voltages[] = {
|
||||
1100000,
|
||||
1200000,
|
||||
1300000,
|
||||
1400000,
|
||||
1500000,
|
||||
1800000,
|
||||
1850000,
|
||||
1900000,
|
||||
2500000,
|
||||
2650000,
|
||||
2700000,
|
||||
2750000,
|
||||
2800000,
|
||||
2900000,
|
||||
3000000,
|
||||
3300000,
|
||||
};
|
||||
|
||||
static const int ldo_vintcore_voltages[] = {
|
||||
1200000,
|
||||
1225000,
|
||||
1250000,
|
||||
1275000,
|
||||
1300000,
|
||||
1325000,
|
||||
1350000,
|
||||
};
|
||||
|
||||
static int ab8500_regulator_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
int regulator_id, ret;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_set_bits(info->ab8500, info->update_reg,
|
||||
info->mask, info->enable);
|
||||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set enable bits for regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ab8500_regulator_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
int regulator_id, ret;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_set_bits(info->ab8500, info->update_reg,
|
||||
info->mask, 0x0);
|
||||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set disable bits for regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
int regulator_id, ret;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_read(info->ab8500, info->update_reg);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't read 0x%x register\n", info->update_reg);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ret & info->mask)
|
||||
return true;
|
||||
else
|
||||
return false;
|
||||
}
|
||||
|
||||
static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
int regulator_id;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
/* return the uV for the fixed regulators */
|
||||
if (info->fixed_uV)
|
||||
return info->fixed_uV;
|
||||
|
||||
if (selector > info->voltages_len)
|
||||
return -EINVAL;
|
||||
|
||||
return info->supported_voltages[selector];
|
||||
}
|
||||
|
||||
static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
|
||||
{
|
||||
int regulator_id, ret, val;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_read(info->ab8500, info->voltage_reg);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't read voltage reg for regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* vintcore has a different layout */
|
||||
val = ret & info->voltage_mask;
|
||||
if (regulator_id == AB8500_LDO_INTCORE)
|
||||
ret = info->supported_voltages[val >> 0x3];
|
||||
else
|
||||
ret = info->supported_voltages[val];
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
int i;
|
||||
|
||||
/* check the supported voltage */
|
||||
for (i = 0; i < info->voltages_len; i++) {
|
||||
if ((info->supported_voltages[i] >= min_uV) &&
|
||||
(info->supported_voltages[i] <= max_uV))
|
||||
return i;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
int regulator_id, ret;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
/* get the appropriate voltages within the range */
|
||||
ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't get best voltage for regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* set the registers for the request */
|
||||
ret = ab8500_set_bits(info->ab8500, info->voltage_reg,
|
||||
info->voltage_mask, ret);
|
||||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set voltage reg for regulator\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct regulator_ops ab8500_regulator_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.get_voltage = ab8500_regulator_get_voltage,
|
||||
.set_voltage = ab8500_regulator_set_voltage,
|
||||
.list_voltage = ab8500_list_voltage,
|
||||
};
|
||||
|
||||
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
|
||||
{
|
||||
int regulator_id;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
return info->fixed_uV;
|
||||
}
|
||||
|
||||
static struct regulator_ops ab8500_ldo_fixed_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.get_voltage = ab8500_fixed_get_voltage,
|
||||
.list_voltage = ab8500_list_voltage,
|
||||
};
|
||||
|
||||
#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable, \
|
||||
volt_reg, volt_mask, voltages, \
|
||||
len_volts) \
|
||||
{ \
|
||||
.desc = { \
|
||||
.name = "LDO-" #_id, \
|
||||
.ops = &ab8500_regulator_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = AB8500_LDO_##_id, \
|
||||
.owner = THIS_MODULE, \
|
||||
}, \
|
||||
.min_uV = (min) * 1000, \
|
||||
.max_uV = (max) * 1000, \
|
||||
.update_reg = reg, \
|
||||
.mask = reg_mask, \
|
||||
.enable = reg_enable, \
|
||||
.voltage_reg = volt_reg, \
|
||||
.voltage_mask = volt_mask, \
|
||||
.supported_voltages = voltages, \
|
||||
.voltages_len = len_volts, \
|
||||
.fixed_uV = 0, \
|
||||
}
|
||||
|
||||
#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask, \
|
||||
reg_enable) \
|
||||
{ \
|
||||
.desc = { \
|
||||
.name = "LDO-" #_id, \
|
||||
.ops = &ab8500_ldo_fixed_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = AB8500_LDO_##_id, \
|
||||
.owner = THIS_MODULE, \
|
||||
}, \
|
||||
.fixed_uV = fixed * 1000, \
|
||||
.update_reg = reg, \
|
||||
.mask = reg_mask, \
|
||||
.enable = reg_enable, \
|
||||
}
|
||||
|
||||
static struct ab8500_regulator_info ab8500_regulator_info[] = {
|
||||
/*
|
||||
* Variable Voltage LDOs
|
||||
* name, min uV, max uV, ctrl reg, reg mask, enable mask,
|
||||
* volt ctrl reg, volt ctrl mask, volt table, num supported volts
|
||||
*/
|
||||
AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf,
|
||||
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
||||
AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf,
|
||||
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
||||
AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf,
|
||||
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
||||
AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38,
|
||||
ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
|
||||
|
||||
/*
|
||||
* Fixed Voltage LDOs
|
||||
* name, o/p uV, ctrl reg, enable, disable
|
||||
*/
|
||||
AB8500_FIXED_LDO(TVOUT, 2000, 0x0380, 0x2, 0x2),
|
||||
AB8500_FIXED_LDO(AUDIO, 2000, 0x0383, 0x2, 0x2),
|
||||
AB8500_FIXED_LDO(ANAMIC1, 2050, 0x0383, 0x4, 0x4),
|
||||
AB8500_FIXED_LDO(ANAMIC2, 2050, 0x0383, 0x8, 0x8),
|
||||
AB8500_FIXED_LDO(DMIC, 1800, 0x0383, 0x10, 0x10),
|
||||
AB8500_FIXED_LDO(ANA, 1200, 0x0383, 0xc, 0x4),
|
||||
};
|
||||
|
||||
static inline struct ab8500_regulator_info *find_regulator_info(int id)
|
||||
{
|
||||
struct ab8500_regulator_info *info;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
|
||||
info = &ab8500_regulator_info[i];
|
||||
if (info->desc.id == id)
|
||||
return info;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
||||
struct ab8500_platform_data *pdata = dev_get_platdata(ab8500->dev);
|
||||
int i, err;
|
||||
|
||||
if (!ab8500) {
|
||||
dev_err(&pdev->dev, "null mfd parent\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* register all regulators */
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
|
||||
struct ab8500_regulator_info *info = NULL;
|
||||
|
||||
/* assign per-regulator data */
|
||||
info = &ab8500_regulator_info[i];
|
||||
info->dev = &pdev->dev;
|
||||
info->ab8500 = ab8500;
|
||||
|
||||
info->regulator = regulator_register(&info->desc, &pdev->dev,
|
||||
pdata->regulator[i], info);
|
||||
if (IS_ERR(info->regulator)) {
|
||||
err = PTR_ERR(info->regulator);
|
||||
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
||||
info->desc.name);
|
||||
/* when we fail, un-register all earlier regulators */
|
||||
i--;
|
||||
while (i > 0) {
|
||||
info = &ab8500_regulator_info[i];
|
||||
regulator_unregister(info->regulator);
|
||||
i--;
|
||||
}
|
||||
return err;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
|
||||
struct ab8500_regulator_info *info = NULL;
|
||||
info = &ab8500_regulator_info[i];
|
||||
regulator_unregister(info->regulator);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ab8500_regulator_driver = {
|
||||
.probe = ab8500_regulator_probe,
|
||||
.remove = __devexit_p(ab8500_regulator_remove),
|
||||
.driver = {
|
||||
.name = "ab8500-regulator",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ab8500_regulator_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = platform_driver_register(&ab8500_regulator_driver);
|
||||
if (ret != 0)
|
||||
pr_err("Failed to register ab8500 regulator: %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
subsys_initcall(ab8500_regulator_init);
|
||||
|
||||
static void __exit ab8500_regulator_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ab8500_regulator_driver);
|
||||
}
|
||||
module_exit(ab8500_regulator_exit);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
|
||||
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
|
||||
MODULE_ALIAS("platform:ab8500-regulator");
|
||||
Loading…
Reference in New Issue
Block a user