forked from luck/tmp_suning_uos_patched
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})
[ Upstream commit 3153fa38e38af566cf6454a03b1dbadaf6f323c0 ]
According to the comment of the function phy_mipi_dphy_get_default_config(),
it uses minimum D-PHY timings based on MIPI D-PHY specification. They are
derived from the valid ranges specified in Section 6.9, Table 14, Page 41
of the D-PHY specification (v1.2). The table 14 explicitly mentions that
the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE
parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and
'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that
the minimum values are 50000 picoseconds and @lpx picoseconds respectively.
Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is
less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx,
which hints the same minimum values.
Without this patch, the function phy_mipi_dphy_get_default_config()
wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx.
So, let's correct them to 50000 picoseconds and cfg->lpx respectively.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: dddc97e823
("phy: dphy: Add configuration helpers")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
parent
80805f555e
commit
c92bd51313
|
@ -66,10 +66,10 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
|
|||
cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
|
||||
|
||||
cfg->init = 100;
|
||||
cfg->lpx = 60000;
|
||||
cfg->lpx = 50000;
|
||||
cfg->ta_get = 5 * cfg->lpx;
|
||||
cfg->ta_go = 4 * cfg->lpx;
|
||||
cfg->ta_sure = 2 * cfg->lpx;
|
||||
cfg->ta_sure = cfg->lpx;
|
||||
cfg->wakeup = 1000;
|
||||
|
||||
cfg->hs_clk_rate = hs_clk_rate;
|
||||
|
|
Loading…
Reference in New Issue
Block a user