EDAC/ghes: Setup DIMM label from DMI and use it in error reports

The ghes driver reports errors with 'unknown label' even if the actual
DIMM label is known, e.g.:

 EDAC MC0: 1 CE Single-bit ECC on unknown label (node:0 card:0
   module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM location:N0 DIMM_A0
   page:0x966a9b3 offset:0x0 grain:1 syndrome:0x0 - APEI location:
   node:0 card:0 module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM
   location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
   DRAM memory)

Fix this by using struct dimm_info's label string in error reports:

 EDAC MC0: 1 CE Single-bit ECC on N0 DIMM_A0 (node:0 card:0 module:0
   rank:1 bank:515 col:14 bit_pos:16 DIMM location:N0 DIMM_A0
   page:0x99223d8 offset:0x0 grain:1 syndrome:0x0 - APEI location:
   node:0 card:0 module:0 rank:1 bank:515 col:14 bit_pos:16 DIMM
   location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
   DRAM memory)

The labels are initialized by reading the bank and device strings
from DMI. Now, the label information can also read from sysfs. E.g. a
ThunderX2 system will show the following:

  /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0
  /sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0
  /sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0
  /sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0
  /sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0
  /sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0
  /sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0
  /sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0
  /sys/devices/system/edac/mc/mc0/dimm8/dimm_label:N1 DIMM_I0
  /sys/devices/system/edac/mc/mc0/dimm9/dimm_label:N1 DIMM_J0
  /sys/devices/system/edac/mc/mc0/dimm10/dimm_label:N1 DIMM_K0
  /sys/devices/system/edac/mc/mc0/dimm11/dimm_label:N1 DIMM_L0
  /sys/devices/system/edac/mc/mc0/dimm12/dimm_label:N1 DIMM_M0
  /sys/devices/system/edac/mc/mc0/dimm13/dimm_label:N1 DIMM_N0
  /sys/devices/system/edac/mc/mc0/dimm14/dimm_label:N1 DIMM_O0
  /sys/devices/system/edac/mc/mc0/dimm15/dimm_label:N1 DIMM_P0

Since dimm_labels can be rewritten, that label will be used in a later
error report:

  # echo foobar >/sys/devices/system/edac/mc/mc0/dimm0/dimm_label
  # # some error injection here
  # dmesg | grep foobar
  [ 751.383533] EDAC MC0: 1 CE Single-bit ECC on foobar (node:0 card:0
  module:0 rank:1 bank:259 col:3 bit_pos:16 DIMM location:N0 DIMM_A0
  page:0x8c8dc74 offset:0x0 grain:1 syndrome:0x0 - APEI location:
  node:0 card:0 module:0 rank:1 bank:259 col:3 bit_pos:16 DIMM
  location:N0 DIMM_A0 status(0x0000000000000400): Storage error in DRAM
  memory)

 [ bp: Remove curly brackets around a single if-statement in dimm_setup_label(). ]

Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528101307.23245-1-rrichter@marvell.com
This commit is contained in:
Robert Richter 2020-05-28 12:13:06 +02:00 committed by Borislav Petkov
parent b3a9e3b962
commit cb51a371d0

View File

@ -87,16 +87,27 @@ static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
(*num_dimm)++; (*num_dimm)++;
} }
static int get_dimm_smbios_index(struct mem_ctl_info *mci, u16 handle) static struct dimm_info *find_dimm_by_handle(struct mem_ctl_info *mci, u16 handle)
{ {
struct dimm_info *dimm; struct dimm_info *dimm;
mci_for_each_dimm(mci, dimm) { mci_for_each_dimm(mci, dimm) {
if (dimm->smbios_handle == handle) if (dimm->smbios_handle == handle)
return dimm->idx; return dimm;
} }
return -1; return NULL;
}
static void dimm_setup_label(struct dimm_info *dimm, u16 handle)
{
const char *bank = NULL, *device = NULL;
dmi_memdev_name(handle, &bank, &device);
/* both strings must be non-zero */
if (bank && *bank && device && *device)
snprintf(dimm->label, sizeof(dimm->label), "%s %s", bank, device);
} }
static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg) static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
@ -179,9 +190,7 @@ static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
dimm->dtype = DEV_UNKNOWN; dimm->dtype = DEV_UNKNOWN;
dimm->grain = 128; /* Likely, worse case */ dimm->grain = 128; /* Likely, worse case */
/* dimm_setup_label(dimm, entry->handle);
* FIXME: It shouldn't be hard to also fill the DIMM labels
*/
if (dimm->nr_pages) { if (dimm->nr_pages) {
edac_dbg(1, "DIMM%i: %s size = %d MB%s\n", edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
@ -228,7 +237,6 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
memset(e, 0, sizeof (*e)); memset(e, 0, sizeof (*e));
e->error_count = 1; e->error_count = 1;
e->grain = 1; e->grain = 1;
strcpy(e->label, "unknown label");
e->msg = pvt->msg; e->msg = pvt->msg;
e->other_detail = pvt->other_detail; e->other_detail = pvt->other_detail;
e->top_layer = -1; e->top_layer = -1;
@ -345,7 +353,7 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos); p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) { if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) {
const char *bank = NULL, *device = NULL; const char *bank = NULL, *device = NULL;
int index = -1; struct dimm_info *dimm;
dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device); dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device);
if (bank != NULL && device != NULL) if (bank != NULL && device != NULL)
@ -354,13 +362,18 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
p += sprintf(p, "DIMM DMI handle: 0x%.4x ", p += sprintf(p, "DIMM DMI handle: 0x%.4x ",
mem_err->mem_dev_handle); mem_err->mem_dev_handle);
index = get_dimm_smbios_index(mci, mem_err->mem_dev_handle); dimm = find_dimm_by_handle(mci, mem_err->mem_dev_handle);
if (index >= 0) if (dimm) {
e->top_layer = index; e->top_layer = dimm->idx;
strcpy(e->label, dimm->label);
}
} }
if (p > e->location) if (p > e->location)
*(p - 1) = '\0'; *(p - 1) = '\0';
if (!*e->label)
strcpy(e->label, "unknown memory");
/* All other fields are mapped on e->other_detail */ /* All other fields are mapped on e->other_detail */
p = pvt->other_detail; p = pvt->other_detail;
p += snprintf(p, sizeof(pvt->other_detail), p += snprintf(p, sizeof(pvt->other_detail),