AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

usb: musb: remove references to default_a of struct usb_otg

Browse Source 
musb drivers do not use the otg fsm framework, so referencing to
otg->default_a doesn't have any effect, so remove the references.

But tusb6010 glue driver uses it locally to control the vbus power, so
keep the references in tusb6010 only.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bin Liu 2018-05-21 08:42:18 -05:00 committed by Greg Kroah-Hartman
parent bcb8fd3a2f
commit d2852f2d3e
10 changed files with 25 additions and 51 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
drivers/usb/musb/am35x.c
View File

@ -201,7 +201,6 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
struct omap_musb_board_data *data = plat->board_data;
struct usb_otg *otg = musb->xceiv->otg;
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
u32 epintr, usbintr;
@ -264,14 +263,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}

2
drivers/usb/musb/da8xx.c
View File

@ -280,7 +280,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
@ -295,7 +294,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
*/
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}

49
drivers/usb/musb/davinci.c
View File

@ -311,14 +311,12 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@ -425,6 +423,9 @@ static int davinci_musb_init(struct musb *musb)
static int davinci_musb_exit(struct musb *musb)
{
int maxdelay = 30;
u8 devctl, warn = 0;
del_timer_sync(&musb->dev_timer);
/* force VBUS off */
@ -438,31 +439,27 @@ static int davinci_musb_exit(struct musb *musb)
davinci_musb_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
if (musb->xceiv->otg->default_a) {
int maxdelay = 30;
u8 devctl, warn = 0;
/*
* delay, to avoid problems with module reload.
* if there's no peripheral connected, this can take a
* long time to fall, especially on EVM with huge C133.
*/
do {
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (!(devctl & MUSB_DEVCTL_VBUS))
break;
if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
warn = devctl & MUSB_DEVCTL_VBUS;
dev_dbg(musb->controller, "VBUS %d\n",
warn >> MUSB_DEVCTL_VBUS_SHIFT);
}
msleep(1000);
maxdelay--;
} while (maxdelay > 0);
/* if there's no peripheral connected, this can take a
* long time to fall, especially on EVM with huge C133.
*/
do {
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (!(devctl & MUSB_DEVCTL_VBUS))
break;
if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
warn = devctl & MUSB_DEVCTL_VBUS;
dev_dbg(musb->controller, "VBUS %d\n",
warn >> MUSB_DEVCTL_VBUS_SHIFT);
}
msleep(1000);
maxdelay--;
} while (maxdelay > 0);
/* in OTG mode, another host might be connected */
if (devctl & MUSB_DEVCTL_VBUS)
dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl);
}
/* in OTG mode, another host might be connected */
if (devctl & MUSB_DEVCTL_VBUS)
dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl);
phy_off();

9
drivers/usb/musb/musb_core.c
View File

@ -2352,13 +2352,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
}
if (musb->xceiv->otg->default_a) {
MUSB_HST_MODE(musb);
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
} else {
MUSB_DEV_MODE(musb);
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}
MUSB_DEV_MODE(musb);
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
switch (musb->port_mode) {
case MUSB_HOST:

2
drivers/usb/musb/musb_dsps.c
View File

@ -360,13 +360,11 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
dsps_mod_timer_optional(glue);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}

1
drivers/usb/musb/musb_gadget.c
View File

@ -1794,7 +1794,6 @@ int musb_gadget_setup(struct musb *musb)
musb->g.speed = USB_SPEED_UNKNOWN;
MUSB_DEV_MODE(musb);
musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
/* this "gadget" abstracts/virtualizes the controller */

1
drivers/usb/musb/musb_host.c
View File

@ -2752,7 +2752,6 @@ int musb_host_setup(struct musb *musb, int power_budget)
if (musb->port_mode == MUSB_HOST) {
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
}
otg_set_host(musb->xceiv->otg, &hcd->self);

5
drivers/usb/musb/omap2430.c
View File

@ -77,7 +77,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
otg_set_vbus(otg, 1);
} else {
musb->is_active = 1;
otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@ -89,7 +88,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
* jumping right to B_IDLE...
*/
otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
@ -148,14 +146,12 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct musb_hdrc_platform_data *pdata =
dev_get_platdata(musb->controller);
struct omap_musb_board_data *data = pdata->board_data;
struct usb_otg *otg = musb->xceiv->otg;
pm_runtime_get_sync(musb->controller);
switch (glue->status) {
case MUSB_ID_GROUND:
dev_dbg(musb->controller, "ID GND\n");
otg->default_a = true;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
@ -168,7 +164,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
case MUSB_VBUS_VALID:
dev_dbg(musb->controller, "VBUS Connect\n");
otg->default_a = false;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->xceiv->last_event = USB_EVENT_VBUS;
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);

2
drivers/usb/musb/sunxi.c
View File

@ -105,13 +105,11 @@ static void sunxi_musb_work(struct work_struct *work)
devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL);
if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) {
set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
MUSB_HST_MODE(musb);
devctl |= MUSB_DEVCTL_SESSION;
} else {
clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
devctl &= ~MUSB_DEVCTL_SESSION;

2
drivers/usb/musb/ux500.c
View File

@ -62,7 +62,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
} else {
musb->is_active = 1;
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@ -73,7 +72,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
* right to B_IDLE...
*/
musb->xceiv->otg->default_a = 0;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
}