forked from luck/tmp_suning_uos_patched
hwmon: Driver for Andigilog aSC7621 family monitoring chips
Hwmon driver for Andigilog aSC7621 family monitoring chips. Signed-off-by: George Joseph <george.joseph@fairview5.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
George Joseph
Jean Delvare
parent
2324498502
commit
d58de03872
296
Documentation/hwmon/asc7621
Normal file
296
Documentation/hwmon/asc7621
Normal file
|
|
@ -0,0 +1,296 @@
|
|||
Kernel driver asc7621
|
||||
==================
|
||||
|
||||
Supported chips:
|
||||
Andigilog aSC7621 and aSC7621a
|
||||
Prefix: 'asc7621'
|
||||
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
|
||||
Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf
|
||||
|
||||
Author:
|
||||
George Joseph
|
||||
|
||||
Description provided by Dave Pivin @ Andigilog:
|
||||
|
||||
Andigilog has both the PECI and pre-PECI versions of the Heceta-6, as
|
||||
Intel calls them. Heceta-6e has high frequency PWM and Heceta-6p has
|
||||
added PECI and a 4th thermal zone. The Andigilog aSC7611 is the
|
||||
Heceta-6e part and aSC7621 is the Heceta-6p part. They are both in
|
||||
volume production, shipping to Intel and their subs.
|
||||
|
||||
We have enhanced both parts relative to the governing Intel
|
||||
specification. First enhancement is temperature reading resolution. We
|
||||
have used registers below 20h for vendor-specific functions in addition
|
||||
to those in the Intel-specified vendor range.
|
||||
|
||||
Our conversion process produces a result that is reported as two bytes.
|
||||
The fan speed control uses this finer value to produce a "step-less" fan
|
||||
PWM output. These two bytes are "read-locked" to guarantee that once a
|
||||
high or low byte is read, the other byte is locked-in until after the
|
||||
next read of any register. So to get an atomic reading, read high or low
|
||||
byte, then the very next read should be the opposite byte. Our data
|
||||
sheet says 10-bits of resolution, although you may find the lower bits
|
||||
are active, they are not necessarily reliable or useful externally. We
|
||||
chose not to mask them.
|
||||
|
||||
We employ significant filtering that is user tunable as described in the
|
||||
data sheet. Our temperature reports and fan PWM outputs are very smooth
|
||||
when compared to the competition, in addition to the higher resolution
|
||||
temperature reports. The smoother PWM output does not require user
|
||||
intervention.
|
||||
|
||||
We offer GPIO features on the former VID pins. These are open-drain
|
||||
outputs or inputs and may be used as general purpose I/O or as alarm
|
||||
outputs that are based on temperature limits. These are in 19h and 1Ah.
|
||||
|
||||
We offer flexible mapping of temperature readings to thermal zones. Any
|
||||
temperature may be mapped to any zone, which has a default assignment
|
||||
that follows Intel's specs.
|
||||
|
||||
Since there is a fan to zone assignment that allows for the "hotter" of
|
||||
a set of zones to control the PWM of an individual fan, but there is no
|
||||
indication to the user, we have added an indicator that shows which zone
|
||||
is currently controlling the PWM for a given fan. This is in register
|
||||
00h.
|
||||
|
||||
Both remote diode temperature readings may be given an offset value such
|
||||
that the reported reading as well as the temperature used to determine
|
||||
PWM may be offset for system calibration purposes.
|
||||
|
||||
PECI Extended configuration allows for having more than two domains per
|
||||
PECI address and also provides an enabling function for each PECI
|
||||
address. One could use our flexible zone assignment to have a zone
|
||||
assigned to up to 4 PECI addresses. This is not possible in the default
|
||||
Intel configuration. This would be useful in multi-CPU systems with
|
||||
individual fans on each that would benefit from individual fan control.
|
||||
This is in register 0Eh.
|
||||
|
||||
The tachometer measurement system is flexible and able to adapt to many
|
||||
fan types. We can also support pulse-stretched PWM so that 3-wire fans
|
||||
may be used. These characteristics are in registers 04h to 07h.
|
||||
|
||||
Finally, we have added a tach disable function that turns off the tach
|
||||
measurement system for individual tachs in order to save power. That is
|
||||
in register 75h.
|
||||
|
||||
--
|
||||
aSC7621 Product Description
|
||||
|
||||
The aSC7621 has a two wire digital interface compatible with SMBus 2.0.
|
||||
Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
|
||||
connected transistors as well as its own die. Support for Platform
|
||||
Environmental Control Interface (PECI) is included.
|
||||
|
||||
Using temperature information from these four zones, an automatic fan speed
|
||||
control algorithm is employed to minimize acoustic impact while achieving
|
||||
recommended CPU temperature under varying operational loads.
|
||||
|
||||
To set fan speed, the aSC7621 has three independent pulse width modulation
|
||||
(PWM) outputs that are controlled by one, or a combination of three,
|
||||
temperature zones. Both high- and low-frequency PWM ranges are supported.
|
||||
|
||||
The aSC7621 also includes a digital filter that can be invoked to smooth
|
||||
temperature readings for better control of fan speed and minimum acoustic
|
||||
impact.
|
||||
|
||||
The aSC7621 has tachometer inputs to measure fan speed on up to four fans.
|
||||
Limit and status registers for all measured values are included to alert
|
||||
the system host that any measurements are outside of programmed limits
|
||||
via status registers.
|
||||
|
||||
System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are
|
||||
monitored efficiently with internal scaling resistors.
|
||||
|
||||
Features
|
||||
- Supports PECI interface and monitors internal and remote thermal diodes
|
||||
- 2-wire, SMBus 2.0 compliant, serial interface
|
||||
- 10-bit ADC
|
||||
- Monitors VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard/processor supplies
|
||||
- Programmable autonomous fan control based on temperature readings
|
||||
- Noise filtering of temperature reading for fan speed control
|
||||
- 0.25C digital temperature sensor resolution
|
||||
- 3 PWM fan speed control outputs for 2-, 3- or 4-wire fans and up to 4 fan
|
||||
tachometer inputs
|
||||
- Enhanced measured temperature to Temperature Zone assignment.
|
||||
- Provides high and low PWM frequency ranges
|
||||
- 3 GPIO pins for custom use
|
||||
- 24-Lead QSOP package
|
||||
|
||||
Configuration Notes
|
||||
===================
|
||||
|
||||
Except where noted below, the sysfs entries created by this driver follow
|
||||
the standards defined in "sysfs-interface".
|
||||
|
||||
temp1_source
|
||||
0 (default) peci_legacy = 0, Remote 1 Temperature
|
||||
peci_legacy = 1, PECI Processor Temperature 0
|
||||
1 Remote 1 Temperature
|
||||
2 Remote 2 Temperature
|
||||
3 Internal Temperature
|
||||
4 PECI Processor Temperature 0
|
||||
5 PECI Processor Temperature 1
|
||||
6 PECI Processor Temperature 2
|
||||
7 PECI Processor Temperature 3
|
||||
|
||||
temp2_source
|
||||
0 (default) Internal Temperature
|
||||
1 Remote 1 Temperature
|
||||
2 Remote 2 Temperature
|
||||
3 Internal Temperature
|
||||
4 PECI Processor Temperature 0
|
||||
5 PECI Processor Temperature 1
|
||||
6 PECI Processor Temperature 2
|
||||
7 PECI Processor Temperature 3
|
||||
|
||||
temp3_source
|
||||
0 (default) Remote 2 Temperature
|
||||
1 Remote 1 Temperature
|
||||
2 Remote 2 Temperature
|
||||
3 Internal Temperature
|
||||
4 PECI Processor Temperature 0
|
||||
5 PECI Processor Temperature 1
|
||||
6 PECI Processor Temperature 2
|
||||
7 PECI Processor Temperature 3
|
||||
|
||||
temp4_source
|
||||
0 (default) peci_legacy = 0, PECI Processor Temperature 0
|
||||
peci_legacy = 1, Remote 1 Temperature
|
||||
1 Remote 1 Temperature
|
||||
2 Remote 2 Temperature
|
||||
3 Internal Temperature
|
||||
4 PECI Processor Temperature 0
|
||||
5 PECI Processor Temperature 1
|
||||
6 PECI Processor Temperature 2
|
||||
7 PECI Processor Temperature 3
|
||||
|
||||
temp[1-4]_smoothing_enable
|
||||
temp[1-4]_smoothing_time
|
||||
Smooths spikes in temp readings caused by noise.
|
||||
Valid values in milliseconds are:
|
||||
35000
|
||||
17600
|
||||
11800
|
||||
7000
|
||||
4400
|
||||
3000
|
||||
1600
|
||||
800
|
||||
|
||||
temp[1-4]_crit
|
||||
When the corresponding zone temperature reaches this value,
|
||||
ALL pwm outputs will got to 100%.
|
||||
|
||||
temp[5-8]_input
|
||||
temp[5-8]_enable
|
||||
The aSC7621 can also read temperatures provided by the processor
|
||||
via the PECI bus. Usually these are "core" temps and are relative
|
||||
to the point where the automatic thermal control circuit starts
|
||||
throttling. This means that these are usually negative numbers.
|
||||
|
||||
pwm[1-3]_enable
|
||||
0 Fan off.
|
||||
1 Fan on manual control.
|
||||
2 Fan on automatic control and will run at the minimum pwm
|
||||
if the temperature for the zone is below the minimum.
|
||||
3 Fan on automatic control but will be off if the temperature
|
||||
for the zone is below the minimum.
|
||||
4-254 Ignored.
|
||||
255 Fan on full.
|
||||
|
||||
pwm[1-3]_auto_channels
|
||||
Bitmap as described in sysctl-interface with the following
|
||||
exceptions...
|
||||
Only the following combination of zones (and their corresponding masks)
|
||||
are valid:
|
||||
1
|
||||
2
|
||||
3
|
||||
2,3
|
||||
1,2,3
|
||||
4
|
||||
1,2,3,4
|
||||
|
||||
Special values:
|
||||
0 Disabled.
|
||||
16 Fan on manual control.
|
||||
31 Fan on full.
|
||||
|
||||
|
||||
pwm[1-3]_invert
|
||||
When set, inverts the meaning of pwm[1-3].
|
||||
i.e. when pwm = 0, the fan will be on full and
|
||||
when pwm = 255 the fan will be off.
|
||||
|
||||
pwm[1-3]_freq
|
||||
PWM frequency in Hz
|
||||
Valid values in Hz are:
|
||||
|
||||
10
|
||||
15
|
||||
23
|
||||
30 (default)
|
||||
38
|
||||
47
|
||||
62
|
||||
94
|
||||
23000
|
||||
24000
|
||||
25000
|
||||
26000
|
||||
27000
|
||||
28000
|
||||
29000
|
||||
30000
|
||||
|
||||
Setting any other value will be ignored.
|
||||
|
||||
peci_enable
|
||||
Enables or disables PECI
|
||||
|
||||
peci_avg
|
||||
Input filter average time.
|
||||
|
||||
0 0 Sec. (no Smoothing) (default)
|
||||
1 0.25 Sec.
|
||||
2 0.5 Sec.
|
||||
3 1.0 Sec.
|
||||
4 2.0 Sec.
|
||||
5 4.0 Sec.
|
||||
6 8.0 Sec.
|
||||
7 0.0 Sec.
|
||||
|
||||
peci_legacy
|
||||
|
||||
0 Standard Mode (default)
|
||||
Remote Diode 1 reading is associated with
|
||||
Temperature Zone 1, PECI is associated with
|
||||
Zone 4
|
||||
|
||||
1 Legacy Mode
|
||||
PECI is associated with Temperature Zone 1,
|
||||
Remote Diode 1 is associated with Zone 4
|
||||
|
||||
peci_diode
|
||||
Diode filter
|
||||
|
||||
0 0.25 Sec.
|
||||
1 1.1 Sec.
|
||||
2 2.4 Sec. (default)
|
||||
3 3.4 Sec.
|
||||
4 5.0 Sec.
|
||||
5 6.8 Sec.
|
||||
6 10.2 Sec.
|
||||
7 16.4 Sec.
|
||||
|
||||
peci_4domain
|
||||
Four domain enable
|
||||
|
||||
0 1 or 2 Domains for enabled processors (default)
|
||||
1 3 or 4 Domains for enabled processors
|
||||
|
||||
peci_domain
|
||||
Domain
|
||||
|
||||
0 Processor contains a single domain (0) (default)
|
||||
1 Processor contains two domains (0,1)
|
||||
|
|
@ -966,6 +966,13 @@ W: http://www.arm.linux.org.uk/
|
|||
S: Maintained
|
||||
F: arch/arm/vfp/
|
||||
|
||||
ASC7621 HARDWARE MONITOR DRIVER
|
||||
M: George Joseph <george.joseph@fairview5.com>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/asc7621
|
||||
F: drivers/hwmon/asc7621.c
|
||||
|
||||
ASUS ACPI EXTRAS DRIVER
|
||||
M: Corentin Chary <corentincj@iksaif.net>
|
||||
M: Karol Kozimor <sziwan@users.sourceforge.net>
|
||||
|
|
|
|||
|
|
@ -226,6 +226,19 @@ config SENSORS_ADT7475
|
|||
This driver can also be build as a module. If so, the module
|
||||
will be called adt7475.
|
||||
|
||||
config SENSORS_ASC7621
|
||||
tristate "Andigilog aSC7621"
|
||||
depends on HWMON && I2C
|
||||
help
|
||||
If you say yes here you get support for the aSC7621
|
||||
family of SMBus sensors chip found on most Intel X48, X38, 975,
|
||||
965 and 945 desktop boards. Currently supported chips:
|
||||
aSC7621
|
||||
aSC7621a
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called asc7621.
|
||||
|
||||
config SENSORS_K8TEMP
|
||||
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
||||
depends on X86 && PCI && EXPERIMENTAL
|
||||
|
|
|
|||
|
|
@ -36,6 +36,7 @@ obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
|
|||
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
|
||||
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
|
||||
obj-$(CONFIG_SENSORS_AMS) += ams/
|
||||
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
|
||||
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
|
||||
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
|
||||
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
|
||||
|
|
|
|||
1255
drivers/hwmon/asc7621.c
Normal file
1255
drivers/hwmon/asc7621.c
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user