AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

iio: adc: ad799x: add pm_ops to disable the device completely

Browse Source 
The device is always in a low-power state due to the hardware design. It
wakes up upon a conversion request and goes back into the low-power
state. The pm ops are added to disable the device completely and to free
the regulator. Disbaling the device completely should be not that
notable but freeing the regulator is important. Because if it is a shared
power-rail the regulator won't be disabled during suspend-to-ram/disk
and so all devices connected to that rail keeps on.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Marco Felsch 2019-11-29 17:53:14 +01:00 committed by Jonathan Cameron
parent 52241a082d
commit d93813520d
1 changed files with 60 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
drivers/iio/adc/ad799x.c
View File

@ -167,6 +167,21 @@ static int ad799x_read_config(struct ad799x_state *st)
}
}
static int ad799x_update_config(struct ad799x_state *st, u16 config)
{
int ret;
ret = ad799x_write_config(st, config);
if (ret < 0)
return ret;
ret = ad799x_read_config(st);
if (ret < 0)
return ret;
st->config = ret;
return 0;
}
/**
* ad799x_trigger_handler() bh of trigger launched polling to ring buffer
*
@ -808,13 +823,9 @@ static int ad799x_probe(struct i2c_client *client,
indio_dev->channels = st->chip_config->channel;
indio_dev->num_channels = chip_info->num_channels;
ret = ad799x_write_config(st, st->chip_config->default_config);
if (ret < 0)
ret = ad799x_update_config(st, st->chip_config->default_config);
if (ret)
goto error_disable_vref;
ret = ad799x_read_config(st);
if (ret < 0)
goto error_disable_vref;
st->config = ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
&ad799x_trigger_handler, NULL);
@ -864,6 +875,48 @@ static int ad799x_remove(struct i2c_client *client)
return 0;
}
static int __maybe_unused ad799x_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct ad799x_state *st = iio_priv(indio_dev);
regulator_disable(st->vref);
regulator_disable(st->reg);
return 0;
}
static int __maybe_unused ad799x_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct ad799x_state *st = iio_priv(indio_dev);
int ret;
ret = regulator_enable(st->reg);
if (ret) {
dev_err(dev, "Unable to enable vcc regulator\n");
return ret;
}
ret = regulator_enable(st->vref);
if (ret) {
regulator_disable(st->reg);
dev_err(dev, "Unable to enable vref regulator\n");
return ret;
}
/* resync config */
ret = ad799x_update_config(st, st->config);
if (ret) {
regulator_disable(st->vref);
regulator_disable(st->reg);
return ret;
}
return 0;
}
static SIMPLE_DEV_PM_OPS(ad799x_pm_ops, ad799x_suspend, ad799x_resume);
static const struct i2c_device_id ad799x_id[] = {
{ "ad7991", ad7991 },
{ "ad7995", ad7995 },
@ -881,6 +934,7 @@ MODULE_DEVICE_TABLE(i2c, ad799x_id);
static struct i2c_driver ad799x_driver = {
.driver = {
.name = "ad799x",
.pm = &ad799x_pm_ops,
},
.probe = ad799x_probe,
.remove = ad799x_remove,