forked from luck/tmp_suning_uos_patched
phy: amlogic: Add Amlogic AXG PCIE PHY Driver
This adds support for the PCI PHY found in the Amlogic AXG SoC Family. This will allow to mutualize code in pci-meson.c between AXG and G12A SoC. This PHY also uses and chains an analog PHY, which on AXG platform is needed to have reliable PCIe communication. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
parent
af3f5722d1
commit
e2463559ff
|
@ -60,6 +60,17 @@ config PHY_MESON_G12A_USB3_PCIE
|
|||
in Meson G12A SoCs.
|
||||
If unsure, say N.
|
||||
|
||||
config PHY_MESON_AXG_PCIE
|
||||
tristate "Meson AXG PCIE PHY driver"
|
||||
default ARCH_MESON
|
||||
depends on OF && (ARCH_MESON || COMPILE_TEST)
|
||||
select GENERIC_PHY
|
||||
select REGMAP_MMIO
|
||||
help
|
||||
Enable this to support the Meson MIPI + PCIE PHY found
|
||||
in Meson AXG SoCs.
|
||||
If unsure, say N.
|
||||
|
||||
config PHY_MESON_AXG_MIPI_PCIE_ANALOG
|
||||
tristate "Meson AXG MIPI + PCIE analog PHY driver"
|
||||
default ARCH_MESON
|
||||
|
|
|
@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
|
|||
obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
|
||||
obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o
|
||||
obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o
|
||||
obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o
|
||||
obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o
|
||||
|
|
192
drivers/phy/amlogic/phy-meson-axg-pcie.c
Normal file
192
drivers/phy/amlogic/phy-meson-axg-pcie.c
Normal file
|
@ -0,0 +1,192 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Amlogic AXG PCIE PHY driver
|
||||
*
|
||||
* Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt>
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/reset.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/bitfield.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
#define MESON_PCIE_REG0 0x00
|
||||
#define MESON_PCIE_COMMON_CLK BIT(4)
|
||||
#define MESON_PCIE_PORT_SEL GENMASK(3, 2)
|
||||
#define MESON_PCIE_CLK BIT(1)
|
||||
#define MESON_PCIE_POWERDOWN BIT(0)
|
||||
|
||||
#define MESON_PCIE_TWO_X1 FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3)
|
||||
#define MESON_PCIE_COMMON_REF_CLK FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1)
|
||||
#define MESON_PCIE_PHY_INIT (MESON_PCIE_TWO_X1 | \
|
||||
MESON_PCIE_COMMON_REF_CLK)
|
||||
#define MESON_PCIE_RESET_DELAY 500
|
||||
|
||||
struct phy_axg_pcie_priv {
|
||||
struct phy *phy;
|
||||
struct phy *analog;
|
||||
struct regmap *regmap;
|
||||
struct reset_control *reset;
|
||||
};
|
||||
|
||||
static const struct regmap_config phy_axg_pcie_regmap_conf = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 32,
|
||||
.reg_stride = 4,
|
||||
.max_register = MESON_PCIE_REG0,
|
||||
};
|
||||
|
||||
static int phy_axg_pcie_power_on(struct phy *phy)
|
||||
{
|
||||
struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
|
||||
int ret;
|
||||
|
||||
ret = phy_power_on(priv->analog);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
regmap_update_bits(priv->regmap, MESON_PCIE_REG0,
|
||||
MESON_PCIE_POWERDOWN, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int phy_axg_pcie_power_off(struct phy *phy)
|
||||
{
|
||||
struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
|
||||
int ret;
|
||||
|
||||
ret = phy_power_off(priv->analog);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
regmap_update_bits(priv->regmap, MESON_PCIE_REG0,
|
||||
MESON_PCIE_POWERDOWN, 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int phy_axg_pcie_init(struct phy *phy)
|
||||
{
|
||||
struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
|
||||
int ret;
|
||||
|
||||
ret = phy_init(priv->analog);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT);
|
||||
return reset_control_reset(priv->reset);
|
||||
}
|
||||
|
||||
static int phy_axg_pcie_exit(struct phy *phy)
|
||||
{
|
||||
struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
|
||||
int ret;
|
||||
|
||||
ret = phy_exit(priv->analog);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
return reset_control_reset(priv->reset);
|
||||
}
|
||||
|
||||
static int phy_axg_pcie_reset(struct phy *phy)
|
||||
{
|
||||
struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
|
||||
int ret = 0;
|
||||
|
||||
ret = phy_reset(priv->analog);
|
||||
if (ret != 0)
|
||||
goto out;
|
||||
|
||||
ret = reset_control_assert(priv->reset);
|
||||
if (ret != 0)
|
||||
goto out;
|
||||
udelay(MESON_PCIE_RESET_DELAY);
|
||||
|
||||
ret = reset_control_deassert(priv->reset);
|
||||
if (ret != 0)
|
||||
goto out;
|
||||
udelay(MESON_PCIE_RESET_DELAY);
|
||||
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct phy_ops phy_axg_pcie_ops = {
|
||||
.init = phy_axg_pcie_init,
|
||||
.exit = phy_axg_pcie_exit,
|
||||
.power_on = phy_axg_pcie_power_on,
|
||||
.power_off = phy_axg_pcie_power_off,
|
||||
.reset = phy_axg_pcie_reset,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int phy_axg_pcie_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct phy_provider *pphy;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct phy_axg_pcie_priv *priv;
|
||||
struct device_node *np = dev->of_node;
|
||||
struct resource *res;
|
||||
void __iomem *base;
|
||||
int ret;
|
||||
|
||||
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops);
|
||||
if (IS_ERR(priv->phy)) {
|
||||
ret = PTR_ERR(priv->phy);
|
||||
if (ret != -EPROBE_DEFER)
|
||||
dev_err(dev, "failed to create PHY\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
base = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(base))
|
||||
return PTR_ERR(base);
|
||||
|
||||
priv->regmap = devm_regmap_init_mmio(dev, base,
|
||||
&phy_axg_pcie_regmap_conf);
|
||||
if (IS_ERR(priv->regmap))
|
||||
return PTR_ERR(priv->regmap);
|
||||
|
||||
priv->reset = devm_reset_control_array_get(dev, false, false);
|
||||
if (IS_ERR(priv->reset))
|
||||
return PTR_ERR(priv->reset);
|
||||
|
||||
priv->analog = devm_phy_get(dev, "analog");
|
||||
if (IS_ERR(priv->analog))
|
||||
return PTR_ERR(priv->analog);
|
||||
|
||||
phy_set_drvdata(priv->phy, priv);
|
||||
dev_set_drvdata(dev, priv);
|
||||
pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||||
|
||||
return PTR_ERR_OR_ZERO(pphy);
|
||||
}
|
||||
|
||||
static const struct of_device_id phy_axg_pcie_of_match[] = {
|
||||
{
|
||||
.compatible = "amlogic,axg-pcie-phy",
|
||||
},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match);
|
||||
|
||||
static struct platform_driver phy_axg_pcie_driver = {
|
||||
.probe = phy_axg_pcie_probe,
|
||||
.driver = {
|
||||
.name = "phy-axg-pcie",
|
||||
.of_match_table = phy_axg_pcie_of_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(phy_axg_pcie_driver);
|
||||
|
||||
MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>");
|
||||
MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue
Block a user