forked from luck/tmp_suning_uos_patched
Input: add support for ChipOne icn8505 based touchscreens
The ChipOne icn8505 is an i2c capacitive touchscreen controller typically used in cheap x86 tablets, this commit adds a driver for it. Note the icn8505 is somewhat similar to the icn8318 and I started with modifying that driver to support both, but in the end the differences were too large and I decided to write a new driver instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Hans de Goede
Dmitry Torokhov
parent
a5a45b7fcd
commit
e7330fa032
|
|
@ -3441,6 +3441,12 @@ S: Maintained
|
|||
F: Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
|
||||
F: drivers/input/touchscreen/chipone_icn8318.c
|
||||
|
||||
CHIPONE ICN8505 I2C TOUCHSCREEN DRIVER
|
||||
M: Hans de Goede <hdegoede@redhat.com>
|
||||
L: linux-input@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/input/touchscreen/chipone_icn8505.c
|
||||
|
||||
CHROME HARDWARE PLATFORM SUPPORT
|
||||
M: Benson Leung <bleung@chromium.org>
|
||||
M: Olof Johansson <olof@lixom.net>
|
||||
|
|
|
|||
|
|
@ -164,6 +164,17 @@ config TOUCHSCREEN_CHIPONE_ICN8318
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called chipone_icn8318.
|
||||
|
||||
config TOUCHSCREEN_CHIPONE_ICN8505
|
||||
tristate "chipone icn8505 touchscreen controller"
|
||||
depends on I2C && ACPI
|
||||
help
|
||||
Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called chipone_icn8505.
|
||||
|
||||
config TOUCHSCREEN_CY8CTMG110
|
||||
tristate "cy8ctmg110 touchscreen"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o
|
|||
obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505) += chipone_icn8505.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o
|
||||
|
|
|
|||
520
drivers/input/touchscreen/chipone_icn8505.c
Normal file
520
drivers/input/touchscreen/chipone_icn8505.c
Normal file
|
|
@ -0,0 +1,520 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Driver for ChipOne icn8505 i2c touchscreen controller
|
||||
*
|
||||
* Copyright (c) 2015-2018 Red Hat Inc.
|
||||
*
|
||||
* Red Hat authors:
|
||||
* Hans de Goede <hdegoede@redhat.com>
|
||||
*/
|
||||
|
||||
#include <asm/unaligned.h>
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/crc32.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/firmware.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/input/mt.h>
|
||||
#include <linux/input/touchscreen.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
/* Normal operation mode defines */
|
||||
#define ICN8505_REG_ADDR_WIDTH 16
|
||||
|
||||
#define ICN8505_REG_POWER 0x0004
|
||||
#define ICN8505_REG_TOUCHDATA 0x1000
|
||||
#define ICN8505_REG_CONFIGDATA 0x8000
|
||||
|
||||
/* ICN8505_REG_POWER commands */
|
||||
#define ICN8505_POWER_ACTIVE 0x00
|
||||
#define ICN8505_POWER_MONITOR 0x01
|
||||
#define ICN8505_POWER_HIBERNATE 0x02
|
||||
/*
|
||||
* The Android driver uses these to turn on/off the charger filter, but the
|
||||
* filter is way too aggressive making e.g. onscreen keyboards unusable.
|
||||
*/
|
||||
#define ICN8505_POWER_ENA_CHARGER_MODE 0x55
|
||||
#define ICN8505_POWER_DIS_CHARGER_MODE 0x66
|
||||
|
||||
#define ICN8505_MAX_TOUCHES 10
|
||||
|
||||
/* Programming mode defines */
|
||||
#define ICN8505_PROG_I2C_ADDR 0x30
|
||||
#define ICN8505_PROG_REG_ADDR_WIDTH 24
|
||||
|
||||
#define MAX_FW_UPLOAD_TRIES 3
|
||||
|
||||
struct icn8505_touch {
|
||||
u8 slot;
|
||||
u8 x[2];
|
||||
u8 y[2];
|
||||
u8 pressure; /* Seems more like finger width then pressure really */
|
||||
u8 event;
|
||||
/* The difference between 2 and 3 is unclear */
|
||||
#define ICN8505_EVENT_NO_DATA 1 /* No finger seen yet since wakeup */
|
||||
#define ICN8505_EVENT_UPDATE1 2 /* New or updated coordinates */
|
||||
#define ICN8505_EVENT_UPDATE2 3 /* New or updated coordinates */
|
||||
#define ICN8505_EVENT_END 4 /* Finger lifted */
|
||||
} __packed;
|
||||
|
||||
struct icn8505_touch_data {
|
||||
u8 softbutton;
|
||||
u8 touch_count;
|
||||
struct icn8505_touch touches[ICN8505_MAX_TOUCHES];
|
||||
} __packed;
|
||||
|
||||
struct icn8505_data {
|
||||
struct i2c_client *client;
|
||||
struct input_dev *input;
|
||||
struct gpio_desc *wake_gpio;
|
||||
struct touchscreen_properties prop;
|
||||
char firmware_name[32];
|
||||
};
|
||||
|
||||
static int icn8505_read_xfer(struct i2c_client *client, u16 i2c_addr,
|
||||
int reg_addr, int reg_addr_width,
|
||||
void *data, int len, bool silent)
|
||||
{
|
||||
u8 buf[3];
|
||||
int i, ret;
|
||||
struct i2c_msg msg[2] = {
|
||||
{
|
||||
.addr = i2c_addr,
|
||||
.buf = buf,
|
||||
.len = reg_addr_width / 8,
|
||||
},
|
||||
{
|
||||
.addr = i2c_addr,
|
||||
.flags = I2C_M_RD,
|
||||
.buf = data,
|
||||
.len = len,
|
||||
}
|
||||
};
|
||||
|
||||
for (i = 0; i < (reg_addr_width / 8); i++)
|
||||
buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
|
||||
|
||||
ret = i2c_transfer(client->adapter, msg, 2);
|
||||
if (ret != ARRAY_SIZE(msg)) {
|
||||
if (ret >= 0)
|
||||
ret = -EIO;
|
||||
if (!silent)
|
||||
dev_err(&client->dev,
|
||||
"Error reading addr %#x reg %#x: %d\n",
|
||||
i2c_addr, reg_addr, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int icn8505_write_xfer(struct i2c_client *client, u16 i2c_addr,
|
||||
int reg_addr, int reg_addr_width,
|
||||
const void *data, int len, bool silent)
|
||||
{
|
||||
u8 buf[3 + 32]; /* 3 bytes for 24 bit reg-addr + 32 bytes max len */
|
||||
int i, ret;
|
||||
struct i2c_msg msg = {
|
||||
.addr = i2c_addr,
|
||||
.buf = buf,
|
||||
.len = reg_addr_width / 8 + len,
|
||||
};
|
||||
|
||||
if (WARN_ON(len > 32))
|
||||
return -EINVAL;
|
||||
|
||||
for (i = 0; i < (reg_addr_width / 8); i++)
|
||||
buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
|
||||
|
||||
memcpy(buf + reg_addr_width / 8, data, len);
|
||||
|
||||
ret = i2c_transfer(client->adapter, &msg, 1);
|
||||
if (ret != 1) {
|
||||
if (ret >= 0)
|
||||
ret = -EIO;
|
||||
if (!silent)
|
||||
dev_err(&client->dev,
|
||||
"Error writing addr %#x reg %#x: %d\n",
|
||||
i2c_addr, reg_addr, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int icn8505_read_data(struct icn8505_data *icn8505, int reg,
|
||||
void *buf, int len)
|
||||
{
|
||||
return icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
|
||||
ICN8505_REG_ADDR_WIDTH, buf, len, false);
|
||||
}
|
||||
|
||||
static int icn8505_read_reg_silent(struct icn8505_data *icn8505, int reg)
|
||||
{
|
||||
u8 buf;
|
||||
int error;
|
||||
|
||||
error = icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
|
||||
ICN8505_REG_ADDR_WIDTH, &buf, 1, true);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
return buf;
|
||||
}
|
||||
|
||||
static int icn8505_write_reg(struct icn8505_data *icn8505, int reg, u8 val)
|
||||
{
|
||||
return icn8505_write_xfer(icn8505->client, icn8505->client->addr, reg,
|
||||
ICN8505_REG_ADDR_WIDTH, &val, 1, false);
|
||||
}
|
||||
|
||||
static int icn8505_read_prog_data(struct icn8505_data *icn8505, int reg,
|
||||
void *buf, int len)
|
||||
{
|
||||
return icn8505_read_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
|
||||
ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
|
||||
}
|
||||
|
||||
static int icn8505_write_prog_data(struct icn8505_data *icn8505, int reg,
|
||||
const void *buf, int len)
|
||||
{
|
||||
return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
|
||||
ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
|
||||
}
|
||||
|
||||
static int icn8505_write_prog_reg(struct icn8505_data *icn8505, int reg, u8 val)
|
||||
{
|
||||
return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
|
||||
ICN8505_PROG_REG_ADDR_WIDTH, &val, 1, false);
|
||||
}
|
||||
|
||||
/*
|
||||
* Note this function uses a number of magic register addresses and values,
|
||||
* there are deliberately no defines for these because the algorithm is taken
|
||||
* from the icn85xx Android driver and I do not want to make up possibly wrong
|
||||
* names for the addresses and/or values.
|
||||
*/
|
||||
static int icn8505_try_fw_upload(struct icn8505_data *icn8505,
|
||||
const struct firmware *fw)
|
||||
{
|
||||
struct device *dev = &icn8505->client->dev;
|
||||
size_t offset, count;
|
||||
int error;
|
||||
u8 buf[4];
|
||||
u32 crc;
|
||||
|
||||
/* Put the controller in programming mode */
|
||||
error = icn8505_write_prog_reg(icn8505, 0xcc3355, 0x5a);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
usleep_range(2000, 5000);
|
||||
|
||||
error = icn8505_write_prog_reg(icn8505, 0x040400, 0x01);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
usleep_range(2000, 5000);
|
||||
|
||||
error = icn8505_read_prog_data(icn8505, 0x040002, buf, 1);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
if (buf[0] != 0x85) {
|
||||
dev_err(dev, "Failed to enter programming mode\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
usleep_range(1000, 5000);
|
||||
|
||||
/* Enable CRC mode */
|
||||
error = icn8505_write_prog_reg(icn8505, 0x40028, 1);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
/* Send the firmware to SRAM */
|
||||
for (offset = 0; offset < fw->size; offset += count) {
|
||||
count = min_t(size_t, fw->size - offset, 32);
|
||||
error = icn8505_write_prog_data(icn8505, offset,
|
||||
fw->data + offset, count);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Disable CRC mode */
|
||||
error = icn8505_write_prog_reg(icn8505, 0x40028, 0);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
/* Get and check length and CRC */
|
||||
error = icn8505_read_prog_data(icn8505, 0x40034, buf, 2);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
if (get_unaligned_le16(buf) != fw->size) {
|
||||
dev_warn(dev, "Length mismatch after uploading fw\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
error = icn8505_read_prog_data(icn8505, 0x4002c, buf, 4);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
crc = crc32_be(0, fw->data, fw->size);
|
||||
if (get_unaligned_le32(buf) != crc) {
|
||||
dev_warn(dev, "CRC mismatch after uploading fw\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/* Boot controller from SRAM */
|
||||
error = icn8505_write_prog_reg(icn8505, 0x40400, 0x03);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
usleep_range(2000, 5000);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int icn8505_upload_fw(struct icn8505_data *icn8505)
|
||||
{
|
||||
struct device *dev = &icn8505->client->dev;
|
||||
const struct firmware *fw;
|
||||
int i, error;
|
||||
|
||||
/*
|
||||
* Always load the firmware, even if we don't need it at boot, we
|
||||
* we may need it at resume. Having loaded it once will make the
|
||||
* firmware class code cache it at suspend/resume.
|
||||
*/
|
||||
error = request_firmware(&fw, icn8505->firmware_name, dev);
|
||||
if (error) {
|
||||
dev_err(dev, "Firmware request error %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Check if the controller is not already up and running */
|
||||
if (icn8505_read_reg_silent(icn8505, 0x000a) == 0x85)
|
||||
goto success;
|
||||
|
||||
for (i = 1; i <= MAX_FW_UPLOAD_TRIES; i++) {
|
||||
error = icn8505_try_fw_upload(icn8505, fw);
|
||||
if (!error)
|
||||
goto success;
|
||||
|
||||
dev_err(dev, "Failed to upload firmware: %d (attempt %d/%d)\n",
|
||||
error, i, MAX_FW_UPLOAD_TRIES);
|
||||
usleep_range(2000, 5000);
|
||||
}
|
||||
|
||||
success:
|
||||
release_firmware(fw);
|
||||
return error;
|
||||
}
|
||||
|
||||
static bool icn8505_touch_active(u8 event)
|
||||
{
|
||||
return event == ICN8505_EVENT_UPDATE1 ||
|
||||
event == ICN8505_EVENT_UPDATE2;
|
||||
}
|
||||
|
||||
static irqreturn_t icn8505_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct icn8505_data *icn8505 = dev_id;
|
||||
struct device *dev = &icn8505->client->dev;
|
||||
struct icn8505_touch_data touch_data;
|
||||
int i, error;
|
||||
|
||||
error = icn8505_read_data(icn8505, ICN8505_REG_TOUCHDATA,
|
||||
&touch_data, sizeof(touch_data));
|
||||
if (error) {
|
||||
dev_err(dev, "Error reading touch data: %d\n", error);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
if (touch_data.touch_count > ICN8505_MAX_TOUCHES) {
|
||||
dev_warn(dev, "Too many touches %d > %d\n",
|
||||
touch_data.touch_count, ICN8505_MAX_TOUCHES);
|
||||
touch_data.touch_count = ICN8505_MAX_TOUCHES;
|
||||
}
|
||||
|
||||
for (i = 0; i < touch_data.touch_count; i++) {
|
||||
struct icn8505_touch *touch = &touch_data.touches[i];
|
||||
bool act = icn8505_touch_active(touch->event);
|
||||
|
||||
input_mt_slot(icn8505->input, touch->slot);
|
||||
input_mt_report_slot_state(icn8505->input, MT_TOOL_FINGER, act);
|
||||
if (!act)
|
||||
continue;
|
||||
|
||||
touchscreen_report_pos(icn8505->input, &icn8505->prop,
|
||||
get_unaligned_le16(touch->x),
|
||||
get_unaligned_le16(touch->y),
|
||||
true);
|
||||
}
|
||||
|
||||
input_mt_sync_frame(icn8505->input);
|
||||
input_report_key(icn8505->input, KEY_LEFTMETA,
|
||||
touch_data.softbutton == 1);
|
||||
input_sync(icn8505->input);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int icn8505_probe_acpi(struct icn8505_data *icn8505, struct device *dev)
|
||||
{
|
||||
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
|
||||
const char *subsys = "unknown";
|
||||
struct acpi_device *adev;
|
||||
union acpi_object *obj;
|
||||
acpi_status status;
|
||||
|
||||
adev = ACPI_COMPANION(dev);
|
||||
if (!adev)
|
||||
return -ENODEV;
|
||||
|
||||
status = acpi_evaluate_object(adev->handle, "_SUB", NULL, &buffer);
|
||||
if (ACPI_SUCCESS(status)) {
|
||||
obj = buffer.pointer;
|
||||
if (obj->type == ACPI_TYPE_STRING)
|
||||
subsys = obj->string.pointer;
|
||||
else
|
||||
dev_warn(dev, "Warning ACPI _SUB did not return a string\n");
|
||||
} else {
|
||||
dev_warn(dev, "Warning ACPI _SUB failed: %#x\n", status);
|
||||
buffer.pointer = NULL;
|
||||
}
|
||||
|
||||
snprintf(icn8505->firmware_name, sizeof(icn8505->firmware_name),
|
||||
"chipone/icn8505-%s.fw", subsys);
|
||||
|
||||
kfree(buffer.pointer);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int icn8505_probe(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct icn8505_data *icn8505;
|
||||
struct input_dev *input;
|
||||
__le16 resolution[2];
|
||||
int error;
|
||||
|
||||
if (!client->irq) {
|
||||
dev_err(dev, "No irq specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
icn8505 = devm_kzalloc(dev, sizeof(*icn8505), GFP_KERNEL);
|
||||
if (!icn8505)
|
||||
return -ENOMEM;
|
||||
|
||||
input = devm_input_allocate_device(dev);
|
||||
if (!input)
|
||||
return -ENOMEM;
|
||||
|
||||
input->name = client->name;
|
||||
input->id.bustype = BUS_I2C;
|
||||
|
||||
input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
|
||||
input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
|
||||
input_set_capability(input, EV_KEY, KEY_LEFTMETA);
|
||||
|
||||
icn8505->client = client;
|
||||
icn8505->input = input;
|
||||
input_set_drvdata(input, icn8505);
|
||||
|
||||
error = icn8505_probe_acpi(icn8505, dev);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
error = icn8505_upload_fw(icn8505);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
error = icn8505_read_data(icn8505, ICN8505_REG_CONFIGDATA,
|
||||
resolution, sizeof(resolution));
|
||||
if (error) {
|
||||
dev_err(dev, "Error reading resolution: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
input_set_abs_params(input, ABS_MT_POSITION_X, 0,
|
||||
le16_to_cpu(resolution[0]) - 1, 0, 0);
|
||||
input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
|
||||
le16_to_cpu(resolution[1]) - 1, 0, 0);
|
||||
|
||||
touchscreen_parse_properties(input, true, &icn8505->prop);
|
||||
if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
|
||||
!input_abs_get_max(input, ABS_MT_POSITION_Y)) {
|
||||
dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
error = input_mt_init_slots(input, ICN8505_MAX_TOUCHES,
|
||||
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
error = devm_request_threaded_irq(dev, client->irq, NULL, icn8505_irq,
|
||||
IRQF_ONESHOT, client->name, icn8505);
|
||||
if (error) {
|
||||
dev_err(dev, "Error requesting irq: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
error = input_register_device(input);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
i2c_set_clientdata(client, icn8505);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused icn8505_suspend(struct device *dev)
|
||||
{
|
||||
struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
|
||||
|
||||
disable_irq(icn8505->client->irq);
|
||||
|
||||
icn8505_write_reg(icn8505, ICN8505_REG_POWER, ICN8505_POWER_HIBERNATE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused icn8505_resume(struct device *dev)
|
||||
{
|
||||
struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
|
||||
int error;
|
||||
|
||||
error = icn8505_upload_fw(icn8505);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
enable_irq(icn8505->client->irq);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(icn8505_pm_ops, icn8505_suspend, icn8505_resume);
|
||||
|
||||
static const struct acpi_device_id icn8505_acpi_match[] = {
|
||||
{ "CHPN0001" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, icn8505_acpi_match);
|
||||
|
||||
static struct i2c_driver icn8505_driver = {
|
||||
.driver = {
|
||||
.name = "chipone_icn8505",
|
||||
.pm = &icn8505_pm_ops,
|
||||
.acpi_match_table = icn8505_acpi_match,
|
||||
},
|
||||
.probe_new = icn8505_probe,
|
||||
};
|
||||
|
||||
module_i2c_driver(icn8505_driver);
|
||||
|
||||
MODULE_DESCRIPTION("ChipOne icn8505 I2C Touchscreen Driver");
|
||||
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user