AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[SERIAL] typo: buad -> baud

Browse Source 
Replacing mistyped "buad" with "baud" where applicable.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Horst Schirmeier 2006-06-05 10:45:30 +01:00 committed by Russell King
parent 672c6108a5
commit e853534e6b
10 changed files with 10 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/mips/ddb5xxx/ddb5476/dbg_io.c
View File

@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
arch/mips/ddb5xxx/ddb5477/kgdb_io.c
View File

@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
arch/mips/gt64120/ev64120/serialGT.c
View File

@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
* since became unsure of above "buad rate" algorithm (??).
* since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above

2
arch/mips/gt64120/momenco_ocelot/dbg_io.c
View File

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
arch/mips/ite-boards/generic/dbg_io.c
View File

@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
arch/mips/momentum/jaguar_atx/dbg_io.c
View File

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
arch/mips/momentum/ocelot_c/dbg_io.c
View File

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
arch/mips/momentum/ocelot_g/dbg_io.c
View File

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

2
include/asm-arm/arch-l7200/serial_l7200.h
View File

@ -28,7 +28,7 @@
#define UARTDR 0x00 /* Tx/Rx data */
#define RXSTAT 0x04 /* Rx status */
#define H_UBRLCR 0x08 /* mode register high */
#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
#define UARTCON 0x14 /* control register */
#define UARTFLG 0x18 /* flag register */

2
include/asm-arm/arch-l7200/uncompress.h
View File

@ -6,7 +6,7 @@
* Changelog:
* 05-01-2000 SJH Created
* 05-13-2000 SJH Filled in function bodies
* 07-26-2000 SJH Removed hard coded buad rate
* 07-26-2000 SJH Removed hard coded baud rate
*/
#include <asm/hardware.h>