AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[S390] convert some assembler to C.

Browse Source 
Convert GET_IPL_DEVICE assembler macro to C function.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This commit is contained in:
Heiko Carstens 2006-09-20 15:59:15 +02:00 committed by Martin Schwidefsky
parent 1375fc1fb0
commit e87bfe51b5
7 changed files with 99 additions and 93 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
arch/s390/kernel/head.S
View File

@ -481,65 +481,6 @@ start:
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
.macro GET_IPL_DEVICE
.Lget_ipl_device:
l %r1,0xb8 # get sid
sll %r1,15 # test if subchannel is enabled
srl %r1,31
ltr %r1,%r1
bz 2f-.LPG1(%r13) # subchannel disabled
l %r1,0xb8
la %r5,.Lipl_schib-.LPG1(%r13)
stsch 0(%r5) # get schib of subchannel
bnz 2f-.LPG1(%r13) # schib not available
tm 5(%r5),0x01 # devno valid?
bno 2f-.LPG1(%r13)
la %r6,ipl_parameter_flags-.LPG1(%r13)
oi 3(%r6),0x01 # set flag
la %r2,ipl_devno-.LPG1(%r13)
mvc 0(2,%r2),6(%r5) # store devno
tm 4(%r5),0x80 # qdio capable device?
bno 2f-.LPG1(%r13)
oi 3(%r6),0x02 # set flag
# copy ipl parameters
lhi %r0,4096
l %r2,20(%r0) # get address of parameter list
lhi %r3,IPL_PARMBLOCK_ORIGIN
st %r3,20(%r0)
lhi %r4,1
cr %r2,%r3 # start parameters < destination ?
jl 0f
lhi %r1,1 # copy direction is upwards
j 1f
0: lhi %r1,-1 # copy direction is downwards
ar %r2,%r0
ar %r3,%r0
ar %r2,%r1
ar %r3,%r1
1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters
ar %r3,%r1
ar %r2,%r1
sr %r0,%r4
jne 1b
b 2f-.LPG1(%r13)
.align 4
.Lipl_schib:
.rept 13
.long 0
.endr
.globl ipl_parameter_flags
ipl_parameter_flags:
.long 0
.globl ipl_devno
ipl_devno:
.word 0
2:
.endm
#ifdef CONFIG_64BIT
#include "head64.S"
#else

43
arch/s390/kernel/head31.S
View File

@ -37,13 +37,23 @@ startup:basr %r13,0 # get base
startup_continue:
basr %r13,0 # get base
.LPG1: GET_IPL_DEVICE
mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
.LPG1: mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
#
# Setup stack
#
l %r15,.Linittu-.LPG1(%r13)
mvc __LC_CURRENT(4),__TI_task(%r15)
ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
st %r15,__LC_KERNEL_STACK # set end of kernel stack
ahi %r15,-96
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
l %r14,.Lipl_save_parameters-.LPG1(%r13)
basr %r14,%r14
#
# clear bss memory
#
@ -115,6 +125,10 @@ startup_continue:
b .Lfchunk-.LPG1(%r13)
.align 4
.Lipl_save_parameters:
.long ipl_save_parameters
.Linittu:
.long init_thread_union
.Lpmask:
.byte 0
.align 8
@ -274,6 +288,20 @@ startup_continue:
.Lbss_end: .long _end
.Lparmaddr: .long PARMAREA
.Lsccbaddr: .long .Lsccb
.globl ipl_schib
ipl_schib:
.rept 13
.long 0
.endr
.globl ipl_flags
ipl_flags:
.long 0
.globl ipl_devno
ipl_devno:
.word 0
.org 0x12000
.globl s390_readinfo_sccb
s390_readinfo_sccb:
@ -305,16 +333,6 @@ s390_readinfo_sccb:
.globl _stext
_stext: basr %r13,0 # get base
.LPG3:
#
# Setup stack
#
l %r15,.Linittu-.LPG3(%r13)
mvc __LC_CURRENT(4),__TI_task(%r15)
ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
st %r15,__LC_KERNEL_STACK # set end of kernel stack
ahi %r15,-96
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
# check control registers
stctl %c0,%c15,0(%r15)
oi 2(%r15),0x40 # enable sigp emergency signal
@ -333,6 +351,5 @@ _stext: basr %r13,0 # get base
#
.align 8
.Ldw: .long 0x000a0000,0x00000000
.Linittu:.long init_thread_union
.Lstart:.long start_kernel
.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

39
arch/s390/kernel/head64.S
View File

@ -39,7 +39,6 @@ startup_continue:
basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
GET_IPL_DEVICE
lhi %r1,1 # mode 1 = esame
mvi __LC_AR_MODE_ID,1 # set esame flag
slr %r0,%r0 # set cpuid to zero
@ -49,7 +48,18 @@ startup_continue:
lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
#
# Setup stack
#
larl %r15,init_thread_union
lg %r14,__TI_task(%r15) # cache current in lowcore
stg %r14,__LC_CURRENT
aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
stg %r15,__LC_KERNEL_STACK # set end of kernel stack
aghi %r15,-160
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
brasl %r14,ipl_save_parameters
#
# clear bss memory
#
@ -269,6 +279,19 @@ startup_continue:
.Lparmaddr:
.quad PARMAREA
.globl ipl_schib
ipl_schib:
.rept 13
.long 0
.endr
.globl ipl_flags
ipl_flags:
.long 0
.globl ipl_devno
ipl_devno:
.word 0
.org 0x12000
.globl s390_readinfo_sccb
s390_readinfo_sccb:
@ -300,24 +323,12 @@ s390_readinfo_sccb:
.globl _stext
_stext: basr %r13,0 # get base
.LPG3:
#
# Setup stack
#
larl %r15,init_thread_union
lg %r14,__TI_task(%r15) # cache current in lowcore
stg %r14,__LC_CURRENT
aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
stg %r15,__LC_KERNEL_STACK # set end of kernel stack
aghi %r15,-160
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
# check control registers
stctg %c0,%c15,0(%r15)
oi 6(%r15),0x40 # enable sigp emergency signal
oi 4(%r15),0x10 # switch on low address proctection
lctlg %c0,%c15,0(%r15)
#
lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
brasl %r14,start_kernel # go to C code
#
@ -325,7 +336,7 @@ _stext: basr %r13,0 # get base
#
basr %r13,0
lpswe .Ldw-.(%r13) # load disabled wait psw
#
.align 8
.Ldw: .quad 0x0002000180000000,0x0000000000000000
.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

4
arch/s390/kernel/ipl.c
View File

@ -189,9 +189,9 @@ static enum ipl_type ipl_get_type(void)
{
struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
if (!IPL_DEVNO_VALID)
if (!(ipl_flags & IPL_DEVNO_VALID))
return IPL_TYPE_UNKNOWN;
if (!IPL_PARMBLOCK_VALID)
if (!(ipl_flags & IPL_PARMBLOCK_VALID))
return IPL_TYPE_CCW;
if (ipl->hdr.version > IPL_MAX_SUPPORTED_VERSION)
return IPL_TYPE_UNKNOWN;

38
drivers/s390/cio/cio.c
View File

@ -16,11 +16,10 @@
#include <linux/device.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
#include <asm/cio.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include "airq.h"
#include "cio.h"
#include "css.h"
@ -909,3 +908,38 @@ void reipl_ccw_dev(struct ccw_dev_id *devid)
cio_reset_channel_paths();
do_reipl_asm(*((__u32*)&schid));
}
extern struct schib ipl_schib;
/*
* ipl_save_parameters gets called very early. It is not allowed to access
* anything in the bss section at all. The bss section is not cleared yet,
* but may contain some ipl parameters written by the firmware.
* These parameters (if present) are copied to 0x2000.
* To avoid corruption of the ipl parameters, all variables used by this
* function must reside on the stack or in the data section.
*/
void ipl_save_parameters(void)
{
struct subchannel_id schid;
unsigned int *ipl_ptr;
void *src, *dst;
schid = *(struct subchannel_id *)__LC_SUBCHANNEL_ID;
if (!schid.one)
return;
if (stsch(schid, &ipl_schib))
return;
if (!ipl_schib.pmcw.dnv)
return;
ipl_devno = ipl_schib.pmcw.dev;
ipl_flags |= IPL_DEVNO_VALID;
if (!ipl_schib.pmcw.qf)
return;
ipl_flags |= IPL_PARMBLOCK_VALID;
ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR;
src = (void *)(unsigned long)*ipl_ptr;
dst = (void *)IPL_PARMBLOCK_ORIGIN;
memmove(dst, src, PAGE_SIZE);
*ipl_ptr = IPL_PARMBLOCK_ORIGIN;
}

1
include/asm-s390/lowcore.h
View File

@ -35,6 +35,7 @@
#define __LC_IO_NEW_PSW 0x01f0
#endif /* !__s390x__ */
#define __LC_IPL_PARMBLOCK_PTR 0x014
#define __LC_EXT_PARAMS 0x080
#define __LC_CPU_ADDRESS 0x084
#define __LC_EXT_INT_CODE 0x086

8
include/asm-s390/setup.h
View File

@ -125,13 +125,15 @@ struct ipl_parameter_block {
/*
* IPL validity flags and parameters as detected in head.S
*/
extern u32 ipl_parameter_flags;
extern u32 ipl_flags;
extern u16 ipl_devno;
void do_reipl(void);
#define IPL_DEVNO_VALID (ipl_parameter_flags & 1)
#define IPL_PARMBLOCK_VALID (ipl_parameter_flags & 2)
enum {
IPL_DEVNO_VALID = 1,
IPL_PARMBLOCK_VALID = 2,
};
#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \
IPL_PARMBLOCK_ORIGIN)