AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

PCI: Remove unused Optimized Buffer Flush/Fill support

Browse Source 
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts 48a92a8179 ("PCI: add OBFF enable/disable support"),
removing these interfaces:

    pci_enable_obff()
    pci_disable_obff()

[bhelgaas: split to separate patch, also remove prototypes from pci.h]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
This commit is contained in:
Stephen Hemminger 2014-01-10 14:01:05 -07:00 committed by Bjorn Helgaas
parent 3ea8197e13
commit ecc8635608
2 changed files with 0 additions and 89 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
drivers/pci/pci.c
View File

@ -2150,79 +2150,6 @@ void pci_disable_ido(struct pci_dev *dev, unsigned long type)
}
EXPORT_SYMBOL(pci_disable_ido);
/**
* pci_enable_obff - enable optimized buffer flush/fill
* @dev: PCI device
* @type: type of signaling to use
*
* Try to enable @type OBFF signaling on @dev. It will try using WAKE#
* signaling if possible, falling back to message signaling only if
* WAKE# isn't supported. @type should indicate whether the PCIe link
* be brought out of L0s or L1 to send the message. It should be either
* %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
*
* If your device can benefit from receiving all messages, even at the
* power cost of bringing the link back up from a low power state, use
* %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
* preferred type).
*
* RETURNS:
* Zero on success, appropriate error number on failure.
*/
int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
{
u32 cap;
u16 ctrl;
int ret;
pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
if (!(cap & PCI_EXP_DEVCAP2_OBFF_MASK))
return -ENOTSUPP; /* no OBFF support at all */
/* Make sure the topology supports OBFF as well */
if (dev->bus->self) {
ret = pci_enable_obff(dev->bus->self, type);
if (ret)
return ret;
}
pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &ctrl);
if (cap & PCI_EXP_DEVCAP2_OBFF_WAKE)
ctrl |= PCI_EXP_DEVCTL2_OBFF_WAKE_EN;
else {
switch (type) {
case PCI_EXP_OBFF_SIGNAL_L0:
if (!(ctrl & PCI_EXP_DEVCTL2_OBFF_WAKE_EN))
ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGA_EN;
break;
case PCI_EXP_OBFF_SIGNAL_ALWAYS:
ctrl &= ~PCI_EXP_DEVCTL2_OBFF_WAKE_EN;
ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGB_EN;
break;
default:
WARN(1, "bad OBFF signal type\n");
return -ENOTSUPP;
}
}
pcie_capability_write_word(dev, PCI_EXP_DEVCTL2, ctrl);
return 0;
}
EXPORT_SYMBOL(pci_enable_obff);
/**
* pci_disable_obff - disable optimized buffer flush/fill
* @dev: PCI device
*
* Disable OBFF on @dev.
*/
void pci_disable_obff(struct pci_dev *dev)
{
pcie_capability_clear_word(dev, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_OBFF_WAKE_EN);
}
EXPORT_SYMBOL(pci_disable_obff);
static int pci_acs_enable;
/**

16
include/linux/pci.h
View File

@ -1002,13 +1002,6 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
void pci_enable_ido(struct pci_dev *dev, unsigned long type);
void pci_disable_ido(struct pci_dev *dev, unsigned long type);
enum pci_obff_signal_type {
PCI_EXP_OBFF_SIGNAL_L0 = 0,
PCI_EXP_OBFF_SIGNAL_ALWAYS = 1,
};
int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
void pci_disable_obff(struct pci_dev *dev);
/* For use by arch with custom probe code */
void set_pcie_port_type(struct pci_dev *pdev);
void set_pcie_hotplug_bridge(struct pci_dev *pdev);
@ -1427,15 +1420,6 @@ static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type)
{
}
static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type)
{
return 0;
}
static inline void pci_disable_obff(struct pci_dev *dev)
{
}
static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
{
return -EIO;