hwmon: Cleanup a bogus legacy comment

Cleanup a bogus legacy comment that has been replicated to many
hardware monitoring drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/hwmon/it87.c

@@ -214,10 +214,8 @@ static const unsigned int pwm_freq[8] = {
 };
 
 
-/* For each registered IT87, we need to keep some data in memory. That
-   data is pointed to by it87_list[NR]->data. The structure itself is
-   dynamically allocated, at the same time when a new it87 client is
-   allocated. */
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct it87_data {
 	struct i2c_client client;
 	struct class_device *class_dev;

drivers/hwmon/lm78.c

@@ -125,10 +125,8 @@ static inline int TEMP_FROM_REG(s8 val)
    bad. Quite a lot of bookkeeping is done. A real driver can often cut
    some corners. */
 
-/* For each registered LM78, we need to keep some data in memory. That
-   data is pointed to by lm78_list[NR]->data. The structure itself is
-   dynamically allocated, at the same time when a new lm78 client is
-   allocated. */
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct lm78_data {
 	struct i2c_client client;
 	struct class_device *class_dev;

drivers/hwmon/lm85.c

@@ -298,11 +298,6 @@ static int ZONE_TO_REG( int zone )
 #define LM85_DATA_INTERVAL  (HZ + HZ / 2)
 #define LM85_CONFIG_INTERVAL  (1 * 60 * HZ)
 
-/* For each registered LM85, we need to keep some data in memory. That
-   data is pointed to by lm85_list[NR]->data. The structure itself is
-   dynamically allocated, at the same time when a new lm85 client is
-   allocated. */
-
 /* LM85 can automatically adjust fan speeds based on temperature
  * This structure encapsulates an entire Zone config.  There are
  * three zones (one for each temperature input) on the lm85
@@ -329,6 +324,8 @@ struct lm85_autofan {
 	u8 min_off;	/* Min PWM or OFF below "limit", flag */
 };
 
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct lm85_data {
 	struct i2c_client client;
 	struct class_device *class_dev;

drivers/hwmon/sis5595.c

@@ -162,10 +162,8 @@ static inline u8 DIV_TO_REG(int val)
 }
 #define DIV_FROM_REG(val) (1 << (val))
 
-/* For the SIS5595, we need to keep some data in memory. That
-   data is pointed to by sis5595_list[NR]->data. The structure itself is
-   dynamically allocated, at the time when the new sis5595 client is
-   allocated. */
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct sis5595_data {
 	struct i2c_client client;
 	struct class_device *class_dev;

drivers/hwmon/via686a.c

@@ -292,9 +292,8 @@ static inline long TEMP_FROM_REG10(u16 val)
 #define DIV_FROM_REG(val) (1 << (val))
 #define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
 
-/* For the VIA686A, we need to keep some data in memory.
-   The structure is dynamically allocated, at the same time when a new
-   via686a client is allocated. */
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct via686a_data {
 	struct i2c_client client;
 	struct class_device *class_dev;

drivers/hwmon/w83627hf.c

@@ -286,9 +286,8 @@ static inline u8 DIV_TO_REG(long val)
 	return ((u8) i);
 }
 
-/* For each registered chip, we need to keep some data in memory. That
-   data is pointed to by w83627hf_list[NR]->data. The structure itself is
-   dynamically allocated, at the same time when a new client is allocated. */
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct w83627hf_data {
 	struct i2c_client client;
 	struct class_device *class_dev;

drivers/hwmon/w83781d.c

@@ -221,14 +221,8 @@ DIV_TO_REG(long val, enum chips type)
    a bit - except if there could be more than one SMBus. Groan. No solution
    for this yet. */
 
-/* This module may seem overly long and complicated. In fact, it is not so
-   bad. Quite a lot of bookkeeping is done. A real driver can often cut
-   some corners. */
-
-/* For each registered W83781D, we need to keep some data in memory. That
-   data is pointed to by w83781d_list[NR]->data. The structure itself is
-   dynamically allocated, at the same time when a new w83781d client is
-   allocated. */
+/* For each registered chip, we need to keep some data in memory.
+   The structure is dynamically allocated. */
 struct w83781d_data {
 	struct i2c_client client;
 	struct class_device *class_dev;