diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt new file mode 100644 index 000000000000..3944ee3e731e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt @@ -0,0 +1,20 @@ +STM32 VREFBUF - Voltage reference buffer + +Some STM32 devices embed a voltage reference buffer which can be used as +voltage reference for ADCs, DACs and also as voltage reference for external +components through the dedicated VREF+ pin. + +Required properties: +- compatible: Must be "st,stm32-vrefbuf". +- reg: Offset and length of VREFBUF register set. +- clocks: Must contain an entry for peripheral clock. + +Example: + vrefbuf: regulator@58003C00 { + compatible = "st,stm32-vrefbuf"; + reg = <0x58003C00 0x8>; + clocks = <&rcc VREF_CK>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdda>; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 1205e82971d0..e740a66cb1d6 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -709,8 +709,8 @@ config REGULATOR_RN5T618 tristate "Ricoh RN5T567/618 voltage regulators" depends on MFD_RN5T618 help - Say y here to support the regulators found on Ricoh RN5T567 or - RN5T618 PMIC. + Say y here to support the regulators found on Ricoh RN5T567, + RN5T618 or RC5T619 PMIC. config REGULATOR_RT5033 tristate "Richtek RT5033 Regulators" @@ -755,6 +755,18 @@ config REGULATOR_SKY81452 This driver can also be built as a module. If so, the module will be called sky81452-regulator. +config REGULATOR_STM32_VREFBUF + tristate "STMicroelectronics STM32 VREFBUF" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports STMicroelectronics STM32 VREFBUF (voltage + reference buffer) which can be used as voltage reference for + internal ADCs, DACs and also for external components through + dedicated Vref+ pin. + + This driver can also be built as a module. If so, the module + will be called stm32-vrefbuf. + config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 81514b8c3932..cbb6e45c77b2 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o +obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c index 8d2819e36654..ef2be56460fe 100644 --- a/drivers/regulator/rn5t618-regulator.c +++ b/drivers/regulator/rn5t618-regulator.c @@ -79,6 +79,29 @@ static struct regulator_desc rn5t618_regulators[] = { REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000), }; +static struct regulator_desc rc5t619_regulators[] = { + /* DCDC */ + REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC5, DC5CTL, BIT(0), DC5DAC, 0xff, 600000, 3500000, 12500), + /* LDO */ + REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 600000, 3500000, 25000), + REG(LDO6, LDOEN1, BIT(5), LDO6DAC, 0x7f, 600000, 3500000, 25000), + REG(LDO7, LDOEN1, BIT(6), LDO7DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO8, LDOEN1, BIT(7), LDO8DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO9, LDOEN2, BIT(0), LDO9DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO10, LDOEN2, BIT(0), LDO10DAC, 0x7f, 900000, 3500000, 25000), + /* LDO RTC */ + REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1700000, 3500000, 25000), + REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000), +}; + static int rn5t618_regulator_probe(struct platform_device *pdev) { struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent); @@ -86,13 +109,20 @@ static int rn5t618_regulator_probe(struct platform_device *pdev) struct regulator_dev *rdev; struct regulator_desc *regulators; int i; + int num_regulators = 0; switch (rn5t618->variant) { case RN5T567: regulators = rn5t567_regulators; + num_regulators = ARRAY_SIZE(rn5t567_regulators); break; case RN5T618: regulators = rn5t618_regulators; + num_regulators = ARRAY_SIZE(rn5t618_regulators); + break; + case RC5T619: + regulators = rc5t619_regulators; + num_regulators = ARRAY_SIZE(rc5t619_regulators); break; default: return -EINVAL; @@ -101,10 +131,7 @@ static int rn5t618_regulator_probe(struct platform_device *pdev) config.dev = pdev->dev.parent; config.regmap = rn5t618->regmap; - for (i = 0; i < RN5T618_REG_NUM; i++) { - if (!regulators[i].name) - continue; - + for (i = 0; i < num_regulators; i++) { rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); diff --git a/drivers/regulator/stm32-vrefbuf.c b/drivers/regulator/stm32-vrefbuf.c new file mode 100644 index 000000000000..72c8b3e1022b --- /dev/null +++ b/drivers/regulator/stm32-vrefbuf.c @@ -0,0 +1,202 @@ +/* + * Copyright (C) STMicroelectronics 2017 + * + * Author: Fabrice Gasnier + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* STM32 VREFBUF registers */ +#define STM32_VREFBUF_CSR 0x00 + +/* STM32 VREFBUF CSR bitfields */ +#define STM32_VRS GENMASK(6, 4) +#define STM32_VRR BIT(3) +#define STM32_HIZ BIT(1) +#define STM32_ENVR BIT(0) + +struct stm32_vrefbuf { + void __iomem *base; + struct clk *clk; +}; + +static const unsigned int stm32_vrefbuf_voltages[] = { + /* Matches resp. VRS = 000b, 001b, 010b, 011b */ + 2500000, 2048000, 1800000, 1500000, +}; + +static int stm32_vrefbuf_enable(struct regulator_dev *rdev) +{ + struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev); + u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR); + int ret; + + val = (val & ~STM32_HIZ) | STM32_ENVR; + writel_relaxed(val, priv->base + STM32_VREFBUF_CSR); + + /* + * Vrefbuf startup time depends on external capacitor: wait here for + * VRR to be set. That means output has reached expected value. + * ~650us sleep should be enough for caps up to 1.5uF. Use 10ms as + * arbitrary timeout. + */ + ret = readl_poll_timeout(priv->base + STM32_VREFBUF_CSR, val, + !(val & STM32_VRR), 650, 10000); + if (ret) { + dev_err(&rdev->dev, "stm32 vrefbuf timed out!\n"); + val = readl_relaxed(priv->base + STM32_VREFBUF_CSR); + val = (val & ~STM32_ENVR) | STM32_HIZ; + writel_relaxed(val, priv->base + STM32_VREFBUF_CSR); + } + + return ret; +} + +static int stm32_vrefbuf_disable(struct regulator_dev *rdev) +{ + struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev); + u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR); + + val = (val & ~STM32_ENVR) | STM32_HIZ; + writel_relaxed(val, priv->base + STM32_VREFBUF_CSR); + + return 0; +} + +static int stm32_vrefbuf_is_enabled(struct regulator_dev *rdev) +{ + struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev); + + return readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR; +} + +static int stm32_vrefbuf_set_voltage_sel(struct regulator_dev *rdev, + unsigned sel) +{ + struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev); + u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR); + + val = (val & ~STM32_VRS) | FIELD_PREP(STM32_VRS, sel); + writel_relaxed(val, priv->base + STM32_VREFBUF_CSR); + + return 0; +} + +static int stm32_vrefbuf_get_voltage_sel(struct regulator_dev *rdev) +{ + struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev); + u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR); + + return FIELD_GET(STM32_VRS, val); +} + +static const struct regulator_ops stm32_vrefbuf_volt_ops = { + .enable = stm32_vrefbuf_enable, + .disable = stm32_vrefbuf_disable, + .is_enabled = stm32_vrefbuf_is_enabled, + .get_voltage_sel = stm32_vrefbuf_get_voltage_sel, + .set_voltage_sel = stm32_vrefbuf_set_voltage_sel, + .list_voltage = regulator_list_voltage_table, +}; + +static const struct regulator_desc stm32_vrefbuf_regu = { + .name = "vref", + .supply_name = "vdda", + .volt_table = stm32_vrefbuf_voltages, + .n_voltages = ARRAY_SIZE(stm32_vrefbuf_voltages), + .ops = &stm32_vrefbuf_volt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static int stm32_vrefbuf_probe(struct platform_device *pdev) +{ + struct resource *res; + struct stm32_vrefbuf *priv; + struct regulator_config config = { }; + struct regulator_dev *rdev; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + ret = clk_prepare_enable(priv->clk); + if (ret) { + dev_err(&pdev->dev, "clk prepare failed with error %d\n", ret); + return ret; + } + + config.dev = &pdev->dev; + config.driver_data = priv; + config.of_node = pdev->dev.of_node; + config.init_data = of_get_regulator_init_data(&pdev->dev, + pdev->dev.of_node, + &stm32_vrefbuf_regu); + + rdev = regulator_register(&stm32_vrefbuf_regu, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&pdev->dev, "register failed with error %d\n", ret); + goto err_clk_dis; + } + platform_set_drvdata(pdev, rdev); + + return 0; + +err_clk_dis: + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int stm32_vrefbuf_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev); + + regulator_unregister(rdev); + clk_disable_unprepare(priv->clk); + + return 0; +}; + +static const struct of_device_id stm32_vrefbuf_of_match[] = { + { .compatible = "st,stm32-vrefbuf", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32_vrefbuf_of_match); + +static struct platform_driver stm32_vrefbuf_driver = { + .probe = stm32_vrefbuf_probe, + .remove = stm32_vrefbuf_remove, + .driver = { + .name = "stm32-vrefbuf", + .of_match_table = of_match_ptr(stm32_vrefbuf_of_match), + }, +}; +module_platform_driver(stm32_vrefbuf_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Fabrice Gasnier "); +MODULE_DESCRIPTION("STMicroelectronics STM32 VREFBUF driver"); +MODULE_ALIAS("platform:stm32-vrefbuf"); diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h index e5a6cdeb77db..d61bc58aba8a 100644 --- a/include/linux/mfd/rn5t618.h +++ b/include/linux/mfd/rn5t618.h @@ -226,11 +226,17 @@ enum { RN5T618_DCDC2, RN5T618_DCDC3, RN5T618_DCDC4, + RN5T618_DCDC5, RN5T618_LDO1, RN5T618_LDO2, RN5T618_LDO3, RN5T618_LDO4, RN5T618_LDO5, + RN5T618_LDO6, + RN5T618_LDO7, + RN5T618_LDO8, + RN5T618_LDO9, + RN5T618_LDO10, RN5T618_LDORTC1, RN5T618_LDORTC2, RN5T618_REG_NUM,