AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

doc: dt: document altera-passive-serial binding

Browse Source 
Describe an altera-passive-serial devicetree entry, required features

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Joshua Clayton 2017-06-14 10:36:28 -05:00 committed by Greg Kroah-Hartman
parent 68f6be6561
commit f2b56452c4
1 changed files with 29 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
Documentation/devicetree/bindings/fpga/altera-passive-serial.txt Normal file
View File

@ -0,0 +1,29 @@
Altera Passive Serial SPI FPGA Manager
Altera FPGAs support a method of loading the bitstream over what is
referred to as "passive serial".
The passive serial link is not technically SPI, and might require extra
circuits in order to play nicely with other SPI slaves on the same bus.
See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
Required properties:
- compatible: Must be one of the following:
"altr,fpga-passive-serial",
"altr,fpga-arria10-passive-serial"
- reg: SPI chip select of the FPGA
- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
- nstat-gpios: status pin (referred to as nSTATUS in the manual)
Optional properties:
- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
Example:
fpga: fpga@0 {
compatible = "altr,fpga-passive-serial";
spi-max-frequency = <20000000>;
reg = <0>;
nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
};