forked from luck/tmp_suning_uos_patched
Merge branch 'mlxsw-Allow-setting-default-port-priority'
Ido Schimmel says: ==================== mlxsw: Allow setting default port priority Petr says: When LLDP APP TLV selector 1 (EtherType) is used with PID of 0, the corresponding entry specifies "default application priority [...] when application priority is not otherwise specified." mlxsw currently supports this type of APP entry, but uses it only as a fallback for unspecified DSCP rules. However non-IP traffic is prioritized according to port-default priority, not according to the DSCP-to-prio tables, and thus it's currently not possible to prioritize such traffic correctly. This patchset extends the use of the abovementioned APP entry to also set default port priority (in patches #1 and #2) and then (in patch #3) adds a selftest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller
commit
f5e5d27248
|
|
@ -3748,6 +3748,38 @@ mlxsw_reg_qpdsm_prio_pack(char *payload, unsigned short prio, u8 dscp)
|
|||
mlxsw_reg_qpdsm_prio_entry_color2_dscp_set(payload, prio, dscp);
|
||||
}
|
||||
|
||||
/* QPDP - QoS Port DSCP to Priority Mapping Register
|
||||
* -------------------------------------------------
|
||||
* This register controls the port default Switch Priority and Color. The
|
||||
* default Switch Priority and Color are used for frames where the trust state
|
||||
* uses default values. All member ports of a LAG should be configured with the
|
||||
* same default values.
|
||||
*/
|
||||
#define MLXSW_REG_QPDP_ID 0x4007
|
||||
#define MLXSW_REG_QPDP_LEN 0x8
|
||||
|
||||
MLXSW_REG_DEFINE(qpdp, MLXSW_REG_QPDP_ID, MLXSW_REG_QPDP_LEN);
|
||||
|
||||
/* reg_qpdp_local_port
|
||||
* Local Port. Supported for data packets from CPU port.
|
||||
* Access: Index
|
||||
*/
|
||||
MLXSW_ITEM32(reg, qpdp, local_port, 0x00, 16, 8);
|
||||
|
||||
/* reg_qpdp_switch_prio
|
||||
* Default port Switch Priority (default 0)
|
||||
* Access: RW
|
||||
*/
|
||||
MLXSW_ITEM32(reg, qpdp, switch_prio, 0x04, 0, 4);
|
||||
|
||||
static inline void mlxsw_reg_qpdp_pack(char *payload, u8 local_port,
|
||||
u8 switch_prio)
|
||||
{
|
||||
MLXSW_REG_ZERO(qpdp, payload);
|
||||
mlxsw_reg_qpdp_local_port_set(payload, local_port);
|
||||
mlxsw_reg_qpdp_switch_prio_set(payload, switch_prio);
|
||||
}
|
||||
|
||||
/* QPDPM - QoS Port DSCP to Priority Mapping Register
|
||||
* --------------------------------------------------
|
||||
* This register controls the mapping from DSCP field to
|
||||
|
|
@ -10580,6 +10612,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
|
|||
MLXSW_REG(qeec),
|
||||
MLXSW_REG(qrwe),
|
||||
MLXSW_REG(qpdsm),
|
||||
MLXSW_REG(qpdp),
|
||||
MLXSW_REG(qpdpm),
|
||||
MLXSW_REG(qtctm),
|
||||
MLXSW_REG(qpsc),
|
||||
|
|
|
|||
|
|
@ -368,6 +368,17 @@ mlxsw_sp_port_dcb_toggle_trust(struct mlxsw_sp_port *mlxsw_sp_port,
|
|||
return err;
|
||||
}
|
||||
|
||||
static int
|
||||
mlxsw_sp_port_dcb_app_update_qpdp(struct mlxsw_sp_port *mlxsw_sp_port,
|
||||
u8 default_prio)
|
||||
{
|
||||
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
|
||||
char qpdp_pl[MLXSW_REG_QPDP_LEN];
|
||||
|
||||
mlxsw_reg_qpdp_pack(qpdp_pl, mlxsw_sp_port->local_port, default_prio);
|
||||
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qpdp), qpdp_pl);
|
||||
}
|
||||
|
||||
static int
|
||||
mlxsw_sp_port_dcb_app_update_qpdpm(struct mlxsw_sp_port *mlxsw_sp_port,
|
||||
struct dcb_ieee_app_dscp_map *map)
|
||||
|
|
@ -405,6 +416,12 @@ static int mlxsw_sp_port_dcb_app_update(struct mlxsw_sp_port *mlxsw_sp_port)
|
|||
int err;
|
||||
|
||||
default_prio = mlxsw_sp_port_dcb_app_default_prio(mlxsw_sp_port);
|
||||
err = mlxsw_sp_port_dcb_app_update_qpdp(mlxsw_sp_port, default_prio);
|
||||
if (err) {
|
||||
netdev_err(mlxsw_sp_port->dev, "Couldn't configure port default priority\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
have_dscp = mlxsw_sp_port_dcb_app_prio_dscp_map(mlxsw_sp_port,
|
||||
&prio_map);
|
||||
|
||||
|
|
|
|||
176
tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh
Executable file
176
tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh
Executable file
|
|
@ -0,0 +1,176 @@
|
|||
#!/bin/bash
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
# Test for port-default priority. Non-IP packets ingress $swp1 and are
|
||||
# prioritized according to the default priority specified at the port.
|
||||
# rx_octets_prio_* counters are used to verify the prioritization.
|
||||
#
|
||||
# +-----------------------+
|
||||
# | H1 |
|
||||
# | + $h1 |
|
||||
# | | 192.0.2.1/28 |
|
||||
# +----|------------------+
|
||||
# |
|
||||
# +----|------------------+
|
||||
# | SW | |
|
||||
# | + $swp1 |
|
||||
# | 192.0.2.2/28 |
|
||||
# | APP=<prio>,1,0 |
|
||||
# +-----------------------+
|
||||
|
||||
ALL_TESTS="
|
||||
ping_ipv4
|
||||
test_defprio
|
||||
"
|
||||
|
||||
lib_dir=$(dirname $0)/../../../net/forwarding
|
||||
|
||||
NUM_NETIFS=2
|
||||
: ${HIT_TIMEOUT:=1000} # ms
|
||||
source $lib_dir/lib.sh
|
||||
|
||||
declare -a APP
|
||||
|
||||
defprio_install()
|
||||
{
|
||||
local dev=$1; shift
|
||||
local prio=$1; shift
|
||||
local app="app=$prio,1,0"
|
||||
|
||||
lldptool -T -i $dev -V APP $app >/dev/null
|
||||
lldpad_app_wait_set $dev
|
||||
APP[$prio]=$app
|
||||
}
|
||||
|
||||
defprio_uninstall()
|
||||
{
|
||||
local dev=$1; shift
|
||||
local prio=$1; shift
|
||||
local app=${APP[$prio]}
|
||||
|
||||
lldptool -T -i $dev -V APP -d $app >/dev/null
|
||||
lldpad_app_wait_del
|
||||
unset APP[$prio]
|
||||
}
|
||||
|
||||
defprio_flush()
|
||||
{
|
||||
local dev=$1; shift
|
||||
local prio
|
||||
|
||||
if ((${#APP[@]})); then
|
||||
lldptool -T -i $dev -V APP -d ${APP[@]} >/dev/null
|
||||
fi
|
||||
lldpad_app_wait_del
|
||||
APP=()
|
||||
}
|
||||
|
||||
h1_create()
|
||||
{
|
||||
simple_if_init $h1 192.0.2.1/28
|
||||
}
|
||||
|
||||
h1_destroy()
|
||||
{
|
||||
simple_if_fini $h1 192.0.2.1/28
|
||||
}
|
||||
|
||||
switch_create()
|
||||
{
|
||||
ip link set dev $swp1 up
|
||||
ip addr add dev $swp1 192.0.2.2/28
|
||||
}
|
||||
|
||||
switch_destroy()
|
||||
{
|
||||
defprio_flush $swp1
|
||||
ip addr del dev $swp1 192.0.2.2/28
|
||||
ip link set dev $swp1 down
|
||||
}
|
||||
|
||||
setup_prepare()
|
||||
{
|
||||
h1=${NETIFS[p1]}
|
||||
swp1=${NETIFS[p2]}
|
||||
|
||||
vrf_prepare
|
||||
|
||||
h1_create
|
||||
switch_create
|
||||
}
|
||||
|
||||
cleanup()
|
||||
{
|
||||
pre_cleanup
|
||||
|
||||
switch_destroy
|
||||
h1_destroy
|
||||
|
||||
vrf_cleanup
|
||||
}
|
||||
|
||||
ping_ipv4()
|
||||
{
|
||||
ping_test $h1 192.0.2.2
|
||||
}
|
||||
|
||||
wait_for_packets()
|
||||
{
|
||||
local t0=$1; shift
|
||||
local prio_observe=$1; shift
|
||||
|
||||
local t1=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
|
||||
local delta=$((t1 - t0))
|
||||
echo $delta
|
||||
((delta >= 10))
|
||||
}
|
||||
|
||||
__test_defprio()
|
||||
{
|
||||
local prio_install=$1; shift
|
||||
local prio_observe=$1; shift
|
||||
local delta
|
||||
local key
|
||||
local i
|
||||
|
||||
RET=0
|
||||
|
||||
defprio_install $swp1 $prio_install
|
||||
|
||||
local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
|
||||
mausezahn -q $h1 -d 100m -c 10 -t arp reply
|
||||
delta=$(busywait "$HIT_TIMEOUT" wait_for_packets $t0 $prio_observe)
|
||||
|
||||
check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $delta."
|
||||
log_test "Default priority $prio_install/$prio_observe"
|
||||
|
||||
defprio_uninstall $swp1 $prio_install
|
||||
}
|
||||
|
||||
test_defprio()
|
||||
{
|
||||
local prio
|
||||
|
||||
for prio in {0..7}; do
|
||||
__test_defprio $prio $prio
|
||||
done
|
||||
|
||||
defprio_install $swp1 3
|
||||
__test_defprio 0 3
|
||||
__test_defprio 1 3
|
||||
__test_defprio 2 3
|
||||
__test_defprio 4 4
|
||||
__test_defprio 5 5
|
||||
__test_defprio 6 6
|
||||
__test_defprio 7 7
|
||||
defprio_uninstall $swp1 3
|
||||
}
|
||||
|
||||
trap cleanup EXIT
|
||||
|
||||
setup_prepare
|
||||
setup_wait
|
||||
|
||||
tests_run
|
||||
|
||||
exit $EXIT_STATUS
|
||||
|
|
@ -225,6 +225,29 @@ log_info()
|
|||
echo "INFO: $msg"
|
||||
}
|
||||
|
||||
busywait()
|
||||
{
|
||||
local timeout=$1; shift
|
||||
|
||||
local start_time="$(date -u +%s%3N)"
|
||||
while true
|
||||
do
|
||||
local out
|
||||
out=$("$@")
|
||||
local ret=$?
|
||||
if ((!ret)); then
|
||||
echo -n "$out"
|
||||
return 0
|
||||
fi
|
||||
|
||||
local current_time="$(date -u +%s%3N)"
|
||||
if ((current_time - start_time > timeout)); then
|
||||
echo -n "$out"
|
||||
return 1
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
setup_wait_dev()
|
||||
{
|
||||
local dev=$1; shift
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user