mfd: arizona: Basic support for edge triggered IRQs

Allow the user to configure edge triggered IRQs, though we do not yet
fully handle new interrupts occurring while an interrupt is being handled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Mark Brown 2013-03-22 12:59:33 +01:00 committed by Samuel Ortiz
parent 7994c664bd
commit f8a0941f1b
3 changed files with 11 additions and 8 deletions

View File

@ -208,7 +208,7 @@ static const struct i2c_board_info wm1277_devs[] = {
static struct arizona_pdata wm5102_reva_pdata = {
.ldoena = S3C64XX_GPN(7),
.gpio_base = CODEC_GPIO_BASE,
.irq_active_high = true,
.irq_flags = IRQF_TRIGGER_HIGH,
.micd_pol_gpio = CODEC_GPIO_BASE + 4,
.gpio_defaults = {
[2] = 0x10000, /* AIF3TXLRCLK */
@ -237,7 +237,7 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
static struct arizona_pdata wm5102_pdata = {
.ldoena = S3C64XX_GPN(7),
.gpio_base = CODEC_GPIO_BASE,
.irq_active_high = true,
.irq_flags = IRQF_TRIGGER_HIGH,
.micd_pol_gpio = CODEC_GPIO_BASE + 2,
.gpio_defaults = {
[2] = 0x10000, /* AIF3TXLRCLK */

View File

@ -195,7 +195,11 @@ int arizona_irq_init(struct arizona *arizona)
/* Disable all wake sources by default */
regmap_write(arizona->regmap, ARIZONA_WAKE_CONTROL, 0);
if (arizona->pdata.irq_active_high) {
if (!arizona->pdata.irq_flags)
arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
if (arizona->pdata.irq_flags & (IRQF_TRIGGER_HIGH |
IRQF_TRIGGER_RISING)) {
ret = regmap_update_bits(arizona->regmap, ARIZONA_IRQ_CTRL_1,
ARIZONA_IRQ_POL, 0);
if (ret != 0) {
@ -203,12 +207,10 @@ int arizona_irq_init(struct arizona *arizona)
ret);
goto err;
}
flags |= IRQF_TRIGGER_HIGH;
} else {
flags |= IRQF_TRIGGER_LOW;
}
flags |= arizona->pdata.irq_flags;
/* Allocate a virtual IRQ domain to distribute to the regmap domains */
arizona->virq = irq_domain_add_linear(NULL, 2, &arizona_domain_ops,
arizona);

View File

@ -99,7 +99,8 @@ struct arizona_pdata {
/** If a direct 32kHz clock is provided on an MCLK specify it here */
int clk32k_src;
bool irq_active_high; /** IRQ polarity */
/** Mode for primary IRQ (defaults to active low) */
unsigned int irq_flags;
/* Base GPIO */
int gpio_base;