forked from luck/tmp_suning_uos_patched
leds: add LED driver for EL15203000 board
This patch adds a LED class driver for the LEDs found on the Crane Merchandising System EL15203000 LEDs board (aka RED LEDs board). Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
This commit is contained in:
Oleh Kravchenko
Pavel
parent
a788f6f2e2
commit
fc19967bcb
139
Documentation/ABI/testing/sysfs-class-led-driver-el15203000
Normal file
139
Documentation/ABI/testing/sysfs-class-led-driver-el15203000
Normal file
|
|
@ -0,0 +1,139 @@
|
|||
What: /sys/class/leds/<led>/hw_pattern
|
||||
Date: September 2019
|
||||
KernelVersion: 5.5
|
||||
Description:
|
||||
Specify a hardware pattern for the EL15203000 LED.
|
||||
The LEDs board supports only predefined patterns by firmware
|
||||
for specific LEDs.
|
||||
|
||||
Breathing mode for Screen frame light tube:
|
||||
"0 4000 1 4000"
|
||||
|
||||
^
|
||||
|
|
||||
Max-| ---
|
||||
| / \
|
||||
| / \
|
||||
| / \ /
|
||||
| / \ /
|
||||
Min-|- ---
|
||||
|
|
||||
0------4------8--> time (sec)
|
||||
|
||||
Cascade mode for Pipe LED:
|
||||
"1 800 2 800 4 800 8 800 16 800"
|
||||
|
||||
^
|
||||
|
|
||||
0 On -|----+ +----+ +---
|
||||
| | | | |
|
||||
Off-| +-------------------+ +-------------------+
|
||||
|
|
||||
1 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off |----+ +-------------------+ +------------------
|
||||
|
|
||||
2 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off-|---------+ +-------------------+ +-------------
|
||||
|
|
||||
3 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off-|--------------+ +-------------------+ +--------
|
||||
|
|
||||
4 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off-|-------------------+ +-------------------+ +---
|
||||
|
|
||||
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
|
||||
|
||||
Inverted cascade mode for Pipe LED:
|
||||
"30 800 29 800 27 800 23 800 15 800"
|
||||
|
||||
^
|
||||
|
|
||||
0 On -| +-------------------+ +-------------------+
|
||||
| | | | |
|
||||
Off-|----+ +----+ +---
|
||||
|
|
||||
1 On -|----+ +-------------------+ +------------------
|
||||
| | | | |
|
||||
Off | +----+ +----+
|
||||
|
|
||||
2 On -|---------+ +-------------------+ +-------------
|
||||
| | | | |
|
||||
Off-| +----+ +----+
|
||||
|
|
||||
3 On -|--------------+ +-------------------+ +--------
|
||||
| | | | |
|
||||
Off-| +----+ +----+
|
||||
|
|
||||
4 On -|-------------------+ +-------------------+ +---
|
||||
| | | | |
|
||||
Off-| +----+ +----+
|
||||
|
|
||||
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
|
||||
|
||||
Bounce mode for Pipe LED:
|
||||
"1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
|
||||
|
||||
^
|
||||
|
|
||||
0 On -|----+ +--------
|
||||
| | |
|
||||
Off-| +---------------------------------------+
|
||||
|
|
||||
1 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off |----+ +-----------------------------+ +--------
|
||||
|
|
||||
2 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off-|---------+ +-------------------+ +-------------
|
||||
|
|
||||
3 On -| +----+ +----+
|
||||
| | | | |
|
||||
Off-|--------------+ +---------+ +------------------
|
||||
|
|
||||
4 On -| +---------+
|
||||
| | |
|
||||
Off-|-------------------+ +-----------------------
|
||||
|
|
||||
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
|
||||
|
||||
Inverted bounce mode for Pipe LED:
|
||||
"30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
|
||||
|
||||
^
|
||||
|
|
||||
0 On -| +---------------------------------------+
|
||||
| | |
|
||||
Off-|----+ +--------
|
||||
|
|
||||
1 On -|----+ +-----------------------------+ +--------
|
||||
| | | | |
|
||||
Off | +----+ +----+
|
||||
|
|
||||
2 On -|---------+ +-------------------+ +-------------
|
||||
| | | | |
|
||||
Off-| +----+ +----+
|
||||
|
|
||||
3 On -|--------------+ +---------+ +------------------
|
||||
| | | | |
|
||||
Off-| +----+ +----+
|
||||
|
|
||||
4 On -|-------------------+ +-----------------------
|
||||
| | |
|
||||
Off-| +---------+
|
||||
|
|
||||
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
|
||||
|
||||
What: /sys/class/leds/<led>/repeat
|
||||
Date: September 2019
|
||||
KernelVersion: 5.5
|
||||
Description:
|
||||
EL15203000 supports only indefinitely patterns,
|
||||
so this file should always store -1.
|
||||
|
||||
For more info, please see:
|
||||
Documentation/ABI/testing/sysfs-class-led-trigger-pattern
|
||||
|
|
@ -132,6 +132,19 @@ config LEDS_CR0014114
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called leds-cr0014114.
|
||||
|
||||
config LEDS_EL15203000
|
||||
tristate "LED Support for Crane EL15203000"
|
||||
depends on LEDS_CLASS
|
||||
depends on SPI
|
||||
depends on OF
|
||||
help
|
||||
This option enables support for EL15203000 LED Board
|
||||
(aka RED LED board) which is widely used in coffee vending
|
||||
machines produced by Crane Merchandising Systems.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called leds-el15203000.
|
||||
|
||||
config LEDS_LM3530
|
||||
tristate "LCD Backlight driver for LM3530"
|
||||
depends on LEDS_CLASS
|
||||
|
|
|
|||
|
|
@ -89,6 +89,7 @@ obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o
|
|||
# LED SPI Drivers
|
||||
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
|
||||
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
|
||||
obj-$(CONFIG_LEDS_EL15203000) += leds-el15203000.o
|
||||
|
||||
# LED Userspace Drivers
|
||||
obj-$(CONFIG_LEDS_USER) += uleds.o
|
||||
|
|
|
|||
357
drivers/leds/leds-el15203000.c
Normal file
357
drivers/leds/leds-el15203000.c
Normal file
|
|
@ -0,0 +1,357 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
// Copyright (c) 2019 Crane Merchandising Systems. All rights reserved.
|
||||
// Copyright (C) 2019 Oleh Kravchenko <oleg@kaa.org.ua>
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
/*
|
||||
* EL15203000 SPI protocol description:
|
||||
* +-----+---------+
|
||||
* | LED | COMMAND |
|
||||
* +-----+---------+
|
||||
* | 1 | 1 |
|
||||
* +-----+---------+
|
||||
* (*) LEDs MCU board expects 20 msec delay per byte.
|
||||
*
|
||||
* LEDs:
|
||||
* +----------+--------------+-------------------------------------------+
|
||||
* | ID | NAME | DESCRIPTION |
|
||||
* +----------+--------------+-------------------------------------------+
|
||||
* | 'P' 0x50 | Pipe | Consists from 5 LEDs, controlled by board |
|
||||
* +----------+--------------+-------------------------------------------+
|
||||
* | 'S' 0x53 | Screen frame | Light tube around the screen |
|
||||
* +----------+--------------+-------------------------------------------+
|
||||
* | 'V' 0x56 | Vending area | Highlights a cup of coffee |
|
||||
* +----------+--------------+-------------------------------------------+
|
||||
*
|
||||
* COMMAND:
|
||||
* +----------+-----------------+--------------+--------------+
|
||||
* | VALUES | PIPE | SCREEN FRAME | VENDING AREA |
|
||||
* +----------+-----------------+--------------+--------------+
|
||||
* | '0' 0x30 | Off |
|
||||
* +----------+-----------------------------------------------+
|
||||
* | '1' 0x31 | On |
|
||||
* +----------+-----------------+--------------+--------------+
|
||||
* | '2' 0x32 | Cascade | Breathing |
|
||||
* +----------+-----------------+--------------+
|
||||
* | '3' 0x33 | Inverse cascade |
|
||||
* +----------+-----------------+
|
||||
* | '4' 0x34 | Bounce |
|
||||
* +----------+-----------------+
|
||||
* | '5' 0x35 | Inverse bounce |
|
||||
* +----------+-----------------+
|
||||
*/
|
||||
|
||||
/* EL15203000 default settings */
|
||||
#define EL_FW_DELAY_USEC 20000ul
|
||||
#define EL_PATTERN_DELAY_MSEC 800u
|
||||
#define EL_PATTERN_LEN 10u
|
||||
#define EL_PATTERN_HALF_LEN (EL_PATTERN_LEN / 2)
|
||||
|
||||
enum el15203000_command {
|
||||
/* for all LEDs */
|
||||
EL_OFF = '0',
|
||||
EL_ON = '1',
|
||||
|
||||
/* for Screen LED */
|
||||
EL_SCREEN_BREATHING = '2',
|
||||
|
||||
/* for Pipe LED */
|
||||
EL_PIPE_CASCADE = '2',
|
||||
EL_PIPE_INV_CASCADE = '3',
|
||||
EL_PIPE_BOUNCE = '4',
|
||||
EL_PIPE_INV_BOUNCE = '5',
|
||||
};
|
||||
|
||||
struct el15203000_led {
|
||||
struct el15203000 *priv;
|
||||
struct led_classdev ldev;
|
||||
u32 reg;
|
||||
};
|
||||
|
||||
struct el15203000 {
|
||||
struct device *dev;
|
||||
struct mutex lock;
|
||||
struct spi_device *spi;
|
||||
unsigned long delay;
|
||||
size_t count;
|
||||
struct el15203000_led leds[];
|
||||
};
|
||||
|
||||
static int el15203000_cmd(struct el15203000_led *led, u8 brightness)
|
||||
{
|
||||
int ret;
|
||||
u8 cmd[2];
|
||||
size_t i;
|
||||
|
||||
mutex_lock(&led->priv->lock);
|
||||
|
||||
dev_dbg(led->priv->dev, "Set brightness of 0x%02x(%c) to 0x%02x(%c)",
|
||||
led->reg, led->reg, brightness, brightness);
|
||||
|
||||
/* to avoid SPI mistiming with firmware we should wait some time */
|
||||
if (time_after(led->priv->delay, jiffies)) {
|
||||
dev_dbg(led->priv->dev, "Wait %luus to sync",
|
||||
EL_FW_DELAY_USEC);
|
||||
|
||||
usleep_range(EL_FW_DELAY_USEC,
|
||||
EL_FW_DELAY_USEC + 1);
|
||||
}
|
||||
|
||||
cmd[0] = led->reg;
|
||||
cmd[1] = brightness;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(cmd); i++) {
|
||||
if (i)
|
||||
usleep_range(EL_FW_DELAY_USEC,
|
||||
EL_FW_DELAY_USEC + 1);
|
||||
|
||||
ret = spi_write(led->priv->spi, &cmd[i], sizeof(cmd[i]));
|
||||
if (ret) {
|
||||
dev_err(led->priv->dev,
|
||||
"spi_write() error %d", ret);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
led->priv->delay = jiffies + usecs_to_jiffies(EL_FW_DELAY_USEC);
|
||||
|
||||
mutex_unlock(&led->priv->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int el15203000_set_blocking(struct led_classdev *ldev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct el15203000_led *led = container_of(ldev,
|
||||
struct el15203000_led,
|
||||
ldev);
|
||||
|
||||
return el15203000_cmd(led, brightness == LED_OFF ? EL_OFF : EL_ON);
|
||||
}
|
||||
|
||||
static int el15203000_pattern_set_S(struct led_classdev *ldev,
|
||||
struct led_pattern *pattern,
|
||||
u32 len, int repeat)
|
||||
{
|
||||
struct el15203000_led *led = container_of(ldev,
|
||||
struct el15203000_led,
|
||||
ldev);
|
||||
|
||||
if (repeat > 0 || len != 2 ||
|
||||
pattern[0].delta_t != 4000 || pattern[0].brightness != 0 ||
|
||||
pattern[1].delta_t != 4000 || pattern[1].brightness != 1)
|
||||
return -EINVAL;
|
||||
|
||||
dev_dbg(led->priv->dev, "Breathing mode for 0x%02x(%c)",
|
||||
led->reg, led->reg);
|
||||
|
||||
return el15203000_cmd(led, EL_SCREEN_BREATHING);
|
||||
}
|
||||
|
||||
static bool is_cascade(const struct led_pattern *pattern, u32 len,
|
||||
bool inv, bool right)
|
||||
{
|
||||
int val, t;
|
||||
u32 i;
|
||||
|
||||
if (len != EL_PATTERN_HALF_LEN)
|
||||
return false;
|
||||
|
||||
val = right ? BIT(4) : BIT(0);
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
t = inv ? ~val & GENMASK(4, 0) : val;
|
||||
|
||||
if (pattern[i].delta_t != EL_PATTERN_DELAY_MSEC ||
|
||||
pattern[i].brightness != t)
|
||||
return false;
|
||||
|
||||
val = right ? val >> 1 : val << 1;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
static bool is_bounce(const struct led_pattern *pattern, u32 len, bool inv)
|
||||
{
|
||||
if (len != EL_PATTERN_LEN)
|
||||
return false;
|
||||
|
||||
return is_cascade(pattern, EL_PATTERN_HALF_LEN, inv, false) &&
|
||||
is_cascade(pattern + EL_PATTERN_HALF_LEN,
|
||||
EL_PATTERN_HALF_LEN, inv, true);
|
||||
}
|
||||
|
||||
static int el15203000_pattern_set_P(struct led_classdev *ldev,
|
||||
struct led_pattern *pattern,
|
||||
u32 len, int repeat)
|
||||
{
|
||||
u8 cmd;
|
||||
struct el15203000_led *led = container_of(ldev,
|
||||
struct el15203000_led,
|
||||
ldev);
|
||||
|
||||
if (repeat > 0)
|
||||
return -EINVAL;
|
||||
|
||||
if (is_cascade(pattern, len, false, false)) {
|
||||
dev_dbg(led->priv->dev, "Cascade mode for 0x%02x(%c)",
|
||||
led->reg, led->reg);
|
||||
|
||||
cmd = EL_PIPE_CASCADE;
|
||||
} else if (is_cascade(pattern, len, true, false)) {
|
||||
dev_dbg(led->priv->dev, "Inverse cascade mode for 0x%02x(%c)",
|
||||
led->reg, led->reg);
|
||||
|
||||
cmd = EL_PIPE_INV_CASCADE;
|
||||
} else if (is_bounce(pattern, len, false)) {
|
||||
dev_dbg(led->priv->dev, "Bounce mode for 0x%02x(%c)",
|
||||
led->reg, led->reg);
|
||||
|
||||
cmd = EL_PIPE_BOUNCE;
|
||||
} else if (is_bounce(pattern, len, true)) {
|
||||
dev_dbg(led->priv->dev, "Inverse bounce mode for 0x%02x(%c)",
|
||||
led->reg, led->reg);
|
||||
|
||||
cmd = EL_PIPE_INV_BOUNCE;
|
||||
} else {
|
||||
dev_err(led->priv->dev, "Invalid hw_pattern for 0x%02x(%c)!",
|
||||
led->reg, led->reg);
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return el15203000_cmd(led, cmd);
|
||||
}
|
||||
|
||||
static int el15203000_pattern_clear(struct led_classdev *ldev)
|
||||
{
|
||||
struct el15203000_led *led = container_of(ldev,
|
||||
struct el15203000_led,
|
||||
ldev);
|
||||
|
||||
return el15203000_cmd(led, EL_OFF);
|
||||
}
|
||||
|
||||
static int el15203000_probe_dt(struct el15203000 *priv)
|
||||
{
|
||||
struct el15203000_led *led = priv->leds;
|
||||
struct fwnode_handle *child;
|
||||
int ret;
|
||||
|
||||
device_for_each_child_node(priv->dev, child) {
|
||||
struct led_init_data init_data = {};
|
||||
|
||||
ret = fwnode_property_read_u32(child, "reg", &led->reg);
|
||||
if (ret) {
|
||||
dev_err(priv->dev, "LED without ID number");
|
||||
fwnode_handle_put(child);
|
||||
|
||||
break;
|
||||
}
|
||||
|
||||
if (led->reg > U8_MAX) {
|
||||
dev_err(priv->dev, "LED value %d is invalid", led->reg);
|
||||
fwnode_handle_put(child);
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
fwnode_property_read_string(child, "linux,default-trigger",
|
||||
&led->ldev.default_trigger);
|
||||
|
||||
led->priv = priv;
|
||||
led->ldev.max_brightness = LED_ON;
|
||||
led->ldev.brightness_set_blocking = el15203000_set_blocking;
|
||||
|
||||
if (led->reg == 'S') {
|
||||
led->ldev.pattern_set = el15203000_pattern_set_S;
|
||||
led->ldev.pattern_clear = el15203000_pattern_clear;
|
||||
} else if (led->reg == 'P') {
|
||||
led->ldev.pattern_set = el15203000_pattern_set_P;
|
||||
led->ldev.pattern_clear = el15203000_pattern_clear;
|
||||
}
|
||||
|
||||
init_data.fwnode = child;
|
||||
ret = devm_led_classdev_register_ext(priv->dev, &led->ldev,
|
||||
&init_data);
|
||||
if (ret) {
|
||||
dev_err(priv->dev,
|
||||
"failed to register LED device %s, err %d",
|
||||
led->ldev.name, ret);
|
||||
fwnode_handle_put(child);
|
||||
|
||||
break;
|
||||
}
|
||||
|
||||
led++;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int el15203000_probe(struct spi_device *spi)
|
||||
{
|
||||
struct el15203000 *priv;
|
||||
size_t count;
|
||||
|
||||
count = device_get_child_node_count(&spi->dev);
|
||||
if (!count) {
|
||||
dev_err(&spi->dev, "LEDs are not defined in device tree!");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
priv = devm_kzalloc(&spi->dev, struct_size(priv, leds, count),
|
||||
GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&priv->lock);
|
||||
priv->count = count;
|
||||
priv->dev = &spi->dev;
|
||||
priv->spi = spi;
|
||||
priv->delay = jiffies -
|
||||
usecs_to_jiffies(EL_FW_DELAY_USEC);
|
||||
|
||||
spi_set_drvdata(spi, priv);
|
||||
|
||||
return el15203000_probe_dt(priv);
|
||||
}
|
||||
|
||||
static int el15203000_remove(struct spi_device *spi)
|
||||
{
|
||||
struct el15203000 *priv = spi_get_drvdata(spi);
|
||||
|
||||
mutex_destroy(&priv->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id el15203000_dt_ids[] = {
|
||||
{ .compatible = "crane,el15203000", },
|
||||
{},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, el15203000_dt_ids);
|
||||
|
||||
static struct spi_driver el15203000_driver = {
|
||||
.probe = el15203000_probe,
|
||||
.remove = el15203000_remove,
|
||||
.driver = {
|
||||
.name = KBUILD_MODNAME,
|
||||
.of_match_table = el15203000_dt_ids,
|
||||
},
|
||||
};
|
||||
|
||||
module_spi_driver(el15203000_driver);
|
||||
|
||||
MODULE_AUTHOR("Oleh Kravchenko <oleg@kaa.org.ua>");
|
||||
MODULE_DESCRIPTION("el15203000 LED driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("spi:el15203000");
|
||||
Loading…
Reference in New Issue
Block a user