AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

arm-soc: cleanups, part 2

Browse Source 
These omap cleanups have dependencies on earlier omap branches that in
 turn depend on other cleanups, so they could not go into the same
 branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2ddmCrR//JCVInAQL19BAAypIWzygTKBQOcxk8czo9thEbwQWwall2
 8TnfVT/dLqBtDlvOY7sWE/J+fNVfHLG9JcEw1mE8VABYCW1N9LSdHqpHrF3q2qg7
 /JGNCFFMMpID8PCL4RjwAxlyNN15TzgJ29PUacI1MGRhwqbkuZpiCRCh6e9cRH94
 pNnJbABojWp0rzN+xb9hwHBMCst6snlKHR2C3T5E5JIDB0YW+F9uC3pV+4RpXGTd
 o56h6rwSXR3F3vS4aqdR/C11fSKJ2cDUR0ttR0shLWgPcdk4CP9Pd5FEdMSGLmH7
 /YCDHb4iS59k2raaSaToSj1rykpk1d1X+sGYD2pg+Tc+84jT3/W/pHvxmnb7r9b5
 H9hV6cISZyzhrxlapNhH2SUCdbSq7xdehes9IOoxJlNvR8TdwDGJK0XIAuMaHm/x
 m/d6m2cgtfvqkuiveK6P/JBkXy4V14yoG2CELJcRxMsOQwHRtBnLuxSSlcnY7VOv
 9mSoR4RvRxkcb3T37UG53lSiA5dliT9TS8p5jg6bJvkh4mi932wJpXpmitx/+Ev4
 o9KEzeTx+9my4eBcwOiaH/J7xkBG4219aaL6wbOGB6Qpt7v8/E35SnWWKW7RSJUi
 WxyTQjghpr4hhqceVTw3y1/qyo2B6WI+U4KknjRek8JLqWIm3SABG1N21x2ht9PG
 OpzKEjDyQxg=
 =kMNb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc cleanups, part 2, from Arnd Bergmann:
 "These omap cleanups have dependencies on earlier omap branches that in
  turn depend on other cleanups, so they could not go into the same
  branch."

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: sdrc: Fix the build break for OMAP4 only builds
  ARM: OMAP2+: dmtimer: cleanup fclk usage
  ARM: OMAP2+: Fix mismerge for omap_hwmod_get_main_clk() API
  ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globals
  ARM: OMAP2+: am33xx: Change cpu_is_am33xx to soc_is_am33xx
  ARM: OMAP2+: am33xx: Make am33xx as a separate class
  ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c
  ARM: OMAP2+: All OMAP2PLUS uses omap-device.o target so add one entry
  ARM: OMAP: dmtimer: use devm_ API and do some cleanup in probe()
  ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod framework
  ARM: OMAP2+: PRM/CM: Move the stubbed prm and cm functions to prcm.c file and make them __weak
  ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API
  ARM: OMAP3+: dpll: optimize noncore dpll locking logic
  ARM: OMAP3: control: add definition for CONTROL_CAMERA_PHY_CTRL
  ARM: OMAP2+: powerdomain code: Fix Wake-up power domain power status
  ARM: OMAP4: clockdomain/CM code: Update supported transition modes
  ARM: OMAP3/4: omap_hwmod: Add rstst_offs field to struct omap_hwmod_omap4_prcm
  ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx
This commit is contained in:
Linus Torvalds 2012-07-23 16:22:12 -07:00
commit fde7543027
26 changed files with 296 additions and 207 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/mach-omap2/Kconfig
View File

@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL
help
Compile a kernel suitable for booting most boards
config SOC_HAS_OMAP2_SDRC
bool "OMAP2 SDRAM Controller support"
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_OMAP2PLUS
default y
select CPU_V6
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
bool "TI OMAP3"
@ -39,6 +43,7 @@ config ARCH_OMAP3
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP4
bool "TI OMAP4"
@ -66,16 +71,19 @@ config SOC_OMAP2420
depends on ARCH_OMAP2
default y
select OMAP_DM_TIMER
select SOC_HAS_OMAP2_SDRC
config SOC_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP2
default y
select SOC_HAS_OMAP2_SDRC
config SOC_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3
default y
select SOC_HAS_OMAP2_SDRC
config SOC_TI81XX
bool "TI81XX support"
@ -84,8 +92,10 @@ config SOC_TI81XX
config SOC_AM33XX
bool "AM33XX support"
depends on ARCH_OMAP3
default y
select CPU_V7
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
config OMAP_PACKAGE_ZAF
bool

8
arch/arm/mach-omap2/Makefile
View File

@ -6,7 +6,7 @@
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
omap-2-3-common = irq.o sdrc.o
omap-2-3-common = irq.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
@ -16,12 +16,14 @@ secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
@ -103,6 +105,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
@ -118,6 +121,7 @@ obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
@ -135,6 +139,7 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
@ -154,6 +159,7 @@ obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o

18
arch/arm/mach-omap2/clock.c
View File

@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
return omap2_clksel_set_parent(clk, new_parent);
}
/* OMAP3/4 non-CORE DPLL clkops */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
const struct clkops clkops_omap3_noncore_dpll_ops = {
.enable = omap3_noncore_dpll_enable,
.disable = omap3_noncore_dpll_disable,
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};
const struct clkops clkops_omap3_core_dpll_ops = {
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};
#endif
/*
* OMAP2+ clock reset and init functions
*/

2
arch/arm/mach-omap2/clock3xxx_data.c
View File

@ -3495,7 +3495,7 @@ int __init omap3xxx_clk_init(void)
} else if (cpu_is_ti816x()) {
cpu_mask = RATE_IN_TI816X;
cpu_clkflg = CK_TI816X;
} else if (cpu_is_am33xx()) {
} else if (soc_is_am33xx()) {
cpu_mask = RATE_IN_AM33XX;
} else if (cpu_is_ti814x()) {
cpu_mask = RATE_IN_TI814X;

22
arch/arm/mach-omap2/clock44xx_data.c
View File

@ -3299,17 +3299,17 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X),
CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X),
CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X),
CLK(NULL, "gpt1_fck", &timer1_fck, CK_443X),
CLK(NULL, "gpt10_fck", &timer10_fck, CK_443X),
CLK(NULL, "gpt11_fck", &timer11_fck, CK_443X),
CLK(NULL, "gpt2_fck", &timer2_fck, CK_443X),
CLK(NULL, "gpt3_fck", &timer3_fck, CK_443X),
CLK(NULL, "gpt4_fck", &timer4_fck, CK_443X),
CLK(NULL, "gpt5_fck", &timer5_fck, CK_443X),
CLK(NULL, "gpt6_fck", &timer6_fck, CK_443X),
CLK(NULL, "gpt7_fck", &timer7_fck, CK_443X),
CLK(NULL, "gpt8_fck", &timer8_fck, CK_443X),
CLK(NULL, "gpt9_fck", &timer9_fck, CK_443X),
CLK(NULL, "timer1_fck", &timer1_fck, CK_443X),
CLK(NULL, "timer10_fck", &timer10_fck, CK_443X),
CLK(NULL, "timer11_fck", &timer11_fck, CK_443X),
CLK(NULL, "timer2_fck", &timer2_fck, CK_443X),
CLK(NULL, "timer3_fck", &timer3_fck, CK_443X),
CLK(NULL, "timer4_fck", &timer4_fck, CK_443X),
CLK(NULL, "timer5_fck", &timer5_fck, CK_443X),
CLK(NULL, "timer6_fck", &timer6_fck, CK_443X),
CLK(NULL, "timer7_fck", &timer7_fck, CK_443X),
CLK(NULL, "timer8_fck", &timer8_fck, CK_443X),
CLK(NULL, "timer9_fck", &timer9_fck, CK_443X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_443X),
CLK(NULL, "uart2_fck", &uart2_fck, CK_443X),
CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),

10
arch/arm/mach-omap2/clockdomain44xx.c
View File

@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
static int omap4_clkdm_sleep(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap4_clkdm_wakeup(clkdm);
else
omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst,
clkdm->clkdm_offs);
}
static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)

14
arch/arm/mach-omap2/cminst44xx.c
View File

@ -234,20 +234,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
}
/**
* omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
* @part: PRCM partition ID that the clockdomain registers exist in
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
*
* Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
* No return value.
*/
void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
}
/**
* omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
* @part: PRCM partition ID that the clockdomain registers exist in

25
arch/arm/mach-omap2/cminst44xx.h
View File

@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
# ifdef CONFIG_ARCH_OMAP4
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
# else
static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
return 0;
}
static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
s16 cdoffs, u16 clkctrl_offs)
{
}
static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
}
# endif
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly

10
arch/arm/mach-omap2/common.c
View File

@ -29,8 +29,6 @@
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
@ -39,8 +37,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
omap2_set_globals_prcm(omap2_globals);
}
#endif
#if defined(CONFIG_SOC_OMAP2420)
static struct omap_globals omap242x_globals = {
@ -134,7 +130,9 @@ void __init ti81xx_map_io(void)
{
omapti81xx_map_common_io();
}
#endif
#if defined(CONFIG_SOC_AM33XX)
#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
TI81XX_CONTROL_DEVICE_ID - 0x204)
@ -171,9 +169,7 @@ static struct omap_globals omap4_globals = {
void __init omap2_set_globals_443x(void)
{
omap2_set_globals_tap(&omap4_globals);
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
__omap2_set_globals(&omap4_globals);
}
void __init omap4_map_io(void)

5
arch/arm/mach-omap2/common.h
View File

@ -174,7 +174,12 @@ void omap2_set_globals_am33xx(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
void omap2_set_globals_sdrc(struct omap_globals *);
#else
static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{ }
#endif
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);

1
arch/arm/mach-omap2/control.h
View File

@ -188,6 +188,7 @@
#define OMAP3630_CONTROL_FUSE_OPP120_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
#define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
#define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C)
#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0)
/* OMAP44xx control efuse offsets */
#define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C

26
arch/arm/mach-omap2/dpll3xxx.c
View File

@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
*/
static int _omap3_noncore_dpll_lock(struct clk *clk)
{
const struct dpll_data *dd;
u8 ai;
int r;
u8 state = 1;
int r = 0;
pr_debug("clock: locking DPLL %s\n", clk->name);
dd = clk->dpll_data;
state <<= __ffs(dd->idlest_mask);
/* Check if already locked */
if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
goto done;
ai = omap3_dpll_autoidle_read(clk);
if (ai)
@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
if (ai)
omap3_dpll_allow_idle(clk);
done:
return r;
}
@ -628,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
rate = clk->parent->rate * 2;
return rate;
}
/* OMAP3/4 non-CORE DPLL clkops */
const struct clkops clkops_omap3_noncore_dpll_ops = {
.enable = omap3_noncore_dpll_enable,
.disable = omap3_noncore_dpll_disable,
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};
const struct clkops clkops_omap3_core_dpll_ops = {
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};

4
arch/arm/mach-omap2/id.c
View File

@ -44,7 +44,7 @@ int omap_type(void)
if (cpu_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
} else if (cpu_is_am33xx()) {
} else if (soc_is_am33xx()) {
val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
} else if (cpu_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
@ -189,7 +189,7 @@ static void __init omap3_cpuinfo(void)
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
cpu_name = "TI816X";
} else if (cpu_is_am335x()) {
} else if (soc_is_am335x()) {
cpu_name = "AM335X";
} else if (cpu_is_ti814x()) {
cpu_name = "TI814X";

76
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -415,6 +415,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
return 0;
}
/**
* _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
* @oh: struct omap_hwmod *
*
* The DMADISABLE bit is a semi-automatic bit present in sysconfig register
* of some modules. When the DMA must perform read/write accesses, the
* DMADISABLE bit is cleared by the hardware. But when the DMA must stop
* for power management, software must set the DMADISABLE bit back to 1.
*
* Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon
* error or 0 upon success.
*/
static int _set_dmadisable(struct omap_hwmod *oh)
{
u32 v;
u32 dmadisable_mask;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
/* clocks must be on for this operation */
if (oh->_state != _HWMOD_STATE_ENABLED) {
pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
return -EINVAL;
}
pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
v = oh->_sysc_cache;
dmadisable_mask =
(0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
v |= dmadisable_mask;
_write_sysconfig(v, oh);
return 0;
}
/**
* _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
* @oh: struct omap_hwmod *
@ -1668,11 +1711,17 @@ static int _ocp_softreset(struct omap_hwmod *oh)
* therefore have no OCP header registers to access. Others (like the
* IVA) have idiosyncratic reset sequences. So for these relatively
* rare cases, custom reset code can be supplied in the struct
* omap_hwmod_class .reset function pointer. Passes along the return
* value from either _ocp_softreset() or the custom reset function -
* these must return -EINVAL if the hwmod cannot be reset this way or
* if the hwmod is in the wrong state, -ETIMEDOUT if the module did
* not reset in time, or 0 upon success.
* omap_hwmod_class .reset function pointer.
*
* _set_dmadisable() is called to set the DMADISABLE bit so that it
* does not prevent idling of the system. This is necessary for cases
* where ROMCODE/BOOTLOADER uses dma and transfers control to the
* kernel without disabling dma.
*
* Passes along the return value from either _ocp_softreset() or the
* custom reset function - these must return -EINVAL if the hwmod
* cannot be reset this way or if the hwmod is in the wrong state,
* -ETIMEDOUT if the module did not reset in time, or 0 upon success.
*/
static int _reset(struct omap_hwmod *oh)
{
@ -1694,6 +1743,8 @@ static int _reset(struct omap_hwmod *oh)
}
}
_set_dmadisable(oh);
/*
* OCP_SYSCONFIG bits need to be reprogrammed after a
* softreset. The _enable() function should be split to avoid
@ -3598,3 +3649,18 @@ void __init omap_hwmod_init(void)
inited = true;
}
/**
* omap_hwmod_get_main_clk - get pointer to main clock name
* @oh: struct omap_hwmod *
*
* Returns the main clock name assocated with @oh upon success,
* or NULL if @oh is NULL.
*/
const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
{
if (!oh)
return NULL;
return oh->main_clk;
}

10
arch/arm/mach-omap2/omap_hwmod_common_data.c
View File

@ -47,6 +47,16 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
.midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT,
.sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT,
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
};
/**
* struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
* Used by some IPs on AM33xx
*/
struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = {
.midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT,
.sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT,
};
struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {

6
arch/arm/mach-omap2/powerdomain.c
View File

@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
*
* Return the powerdomain @pwrdm's current power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the current power state
* upon success.
* upon success. Note that if the power domain only supports the ON state
* then just return ON as the current state.
*/
int pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
if (!pwrdm)
return -EINVAL;
if (pwrdm->pwrsts == PWRSTS_ON)
return PWRDM_POWER_ON;
if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);

23
arch/arm/mach-omap2/prcm.c
View File

@ -35,6 +35,7 @@
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include "cminst44xx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
@ -164,3 +165,25 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
omap_cm_base_init();
}
}
/*
* Stubbed functions so that common files continue to build when
* custom builds are used
* XXX These are temporary and should be removed at the earliest possible
* opportunity
*/
int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
return 0;
}
void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
s16 cdoffs, u16 clkctrl_offs)
{
}
void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
}

65
arch/arm/mach-omap2/prm2xxx_3xxx.h
View File

@ -228,68 +228,6 @@
#ifndef __ASSEMBLER__
/*
* Stub omap2xxx/omap3xxx functions so that common files
* continue to build when custom builds are used
*/
#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP3))
static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
}
static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
u8 st_shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
#else
/* Power/reset management domain register get/set */
extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@ -320,9 +258,6 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
#endif /* CONFIG_ARCH_OMAP4 */
#endif
/*

62
arch/arm/mach-omap2/prm_common.c
View File

@ -319,3 +319,65 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
omap_prcm_irq_cleanup();
return -ENOMEM;
}
/*
* Stubbed functions so that common files continue to build when
* custom builds are used
* XXX These are temporary and should be removed at the earliest possible
* opportunity
*/
u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
}
u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
u8 st_shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}

3
arch/arm/mach-omap2/timer.c
View File

@ -168,8 +168,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
return -ENXIO;
/* After the dmtimer is using hwmod these clocks won't be needed */
sprintf(name, "gpt%d_fck", gptimer_id);
timer->fclk = clk_get(NULL, name);
timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
if (IS_ERR(timer->fclk))
return -ENODEV;

4
arch/arm/plat-omap/Makefile
View File

@ -10,9 +10,7 @@ obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o

53
arch/arm/plat-omap/dmtimer.c
View File

@ -37,7 +37,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
@ -689,49 +689,39 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
*/
static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
int ret;
unsigned long flags;
struct omap_dm_timer *timer;
struct resource *mem, *irq, *ioarea;
struct resource *mem, *irq;
struct device *dev = &pdev->dev;
struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
dev_err(dev, "%s: no platform data.\n", __func__);
return -ENODEV;
}
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!irq)) {
dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
dev_err(dev, "%s: no IRQ resource.\n", __func__);
return -ENODEV;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!mem)) {
dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
dev_err(dev, "%s: no memory resource.\n", __func__);
return -ENODEV;
}
ioarea = request_mem_region(mem->start, resource_size(mem),
pdev->name);
if (!ioarea) {
dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
return -EBUSY;
}
timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL);
if (!timer) {
dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
__func__);
ret = -ENOMEM;
goto err_free_ioregion;
dev_err(dev, "%s: memory alloc failed!\n", __func__);
return -ENOMEM;
}
timer->io_base = ioremap(mem->start, resource_size(mem));
timer->io_base = devm_request_and_ioremap(dev, mem);
if (!timer->io_base) {
dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
ret = -ENOMEM;
goto err_free_mem;
dev_err(dev, "%s: region already claimed.\n", __func__);
return -ENOMEM;
}
timer->id = pdev->id;
@ -742,14 +732,14 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
/* Skip pm_runtime_enable for OMAP1 */
if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
pm_runtime_enable(&pdev->dev);
pm_runtime_irq_safe(&pdev->dev);
pm_runtime_enable(dev);
pm_runtime_irq_safe(dev);
}
if (!timer->reserved) {
pm_runtime_get_sync(&pdev->dev);
pm_runtime_get_sync(dev);
__omap_dm_timer_init_regs(timer);
pm_runtime_put(&pdev->dev);
pm_runtime_put(dev);
}
/* add the timer element to the list */
@ -757,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
list_add_tail(&timer->node, &omap_timer_list);
spin_unlock_irqrestore(&dm_timer_lock, flags);
dev_dbg(&pdev->dev, "Device Probed.\n");
dev_dbg(dev, "Device Probed.\n");
return 0;
err_free_mem:
kfree(timer);
err_free_ioregion:
release_mem_region(mem->start, resource_size(mem));
return ret;
}
/**
@ -788,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
list_for_each_entry(timer, &omap_timer_list, node)
if (timer->pdev->id == pdev->id) {
list_del(&timer->node);
kfree(timer);
ret = 0;
break;
}

17
arch/arm/plat-omap/include/plat/cpu.h
View File

@ -150,8 +150,8 @@ IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_ti816x() 0
#define cpu_is_ti814x() 0
#define soc_is_am35xx() 0
#define cpu_is_am33xx() 0
#define cpu_is_am335x() 0
#define soc_is_am33xx() 0
#define soc_is_am335x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
@ -328,8 +328,6 @@ IS_OMAP_TYPE(3430, 0x3430)
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef soc_is_am35xx
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
@ -337,8 +335,13 @@ IS_OMAP_TYPE(3430, 0x3430)
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_ti814x() is_ti814x()
# define soc_is_am35xx() is_am35xx()
# define cpu_is_am33xx() is_am33xx()
# define cpu_is_am335x() is_am335x()
#endif
# if defined(CONFIG_SOC_AM33XX)
# undef soc_is_am33xx
# undef soc_is_am335x
# define soc_is_am33xx() is_am33xx()
# define soc_is_am335x() is_am335x()
#endif
# if defined(CONFIG_ARCH_OMAP4)
@ -392,7 +395,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define AM35XX_REV_ES1_0 AM35XX_CLASS
#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
#define AM335X_CLASS 0x33500034
#define AM335X_CLASS 0x33500033
#define AM335X_REV_ES1_0 AM335X_CLASS
#define OMAP443X_CLASS 0x44300044

19
arch/arm/plat-omap/include/plat/omap_hwmod.h
View File

@ -41,6 +41,7 @@ struct omap_device;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
/*
* OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
@ -69,6 +70,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
#define SYSC_TYPE2_DMADISABLE_SHIFT 16
#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
/*
* OCP SYSCONFIG bit shifts/masks TYPE3.
* This is applicable for some IPs present in AM33XX
*/
#define SYSC_TYPE3_SIDLEMODE_SHIFT 0
#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
#define SYSC_TYPE3_MIDLEMODE_SHIFT 2
#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
@ -283,6 +295,7 @@ struct omap_hwmod_ocp_if {
#define SYSS_HAS_RESET_STATUS (1 << 7)
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
#define SYSC_HAS_RESET_STATUS (1 << 9)
#define SYSC_HAS_DMADISABLE (1 << 10)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
@ -298,6 +311,7 @@ struct omap_hwmod_ocp_if {
* @enwkup_shift: Offset of the enawakeup bit
* @srst_shift: Offset of the softreset bit
* @autoidle_shift: Offset of the autoidle bit
* @dmadisable_shift: Offset of the dmadisable bit
*/
struct omap_hwmod_sysc_fields {
u8 midle_shift;
@ -306,6 +320,7 @@ struct omap_hwmod_sysc_fields {
u8 enwkup_shift;
u8 srst_shift;
u8 autoidle_shift;
u8 dmadisable_shift;
};
/**
@ -374,11 +389,13 @@ struct omap_hwmod_omap2_prcm {
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
* @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
* @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
u16 clkctrl_offs;
u16 rstctrl_offs;
u16 rstst_offs;
u16 context_offs;
u8 submodule_wkdep_bit;
u8 modulemode;
@ -631,6 +648,8 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
extern void __init omap_hwmod_init(void);
const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out

2
arch/arm/plat-omap/include/plat/sdrc.h
View File

@ -123,7 +123,7 @@ struct omap_sdrc_params {
u32 mr;
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#else

6
arch/arm/plat-omap/sram.c
View File

@ -85,7 +85,7 @@ static int is_sram_locked(void)
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
if (cpu_is_omap34xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
@ -123,7 +123,7 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_am33xx()) {
if (soc_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
@ -386,7 +386,7 @@ int __init omap_sram_init(void)
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
else if (cpu_is_am33xx())
else if (soc_is_am33xx())
am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();