forked from luck/tmp_suning_uos_patched
power: supply: add sbs-charger driver
This adds support for sbs-charger compilant chips as defined here: http://sbs-forum.org/specs/sbc110.pdf This was tested on a arm board connected to an LTC4100 battery charger chip. Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@prodys.net> Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit is contained in:
Nicolas Saenz Julienne
Sebastian Reichel
parent
63219a2fe4
commit
feb583e37f
|
|
@ -164,6 +164,12 @@ config BATTERY_SBS
|
|||
Say Y to include support for SBS battery driver for SBS-compliant
|
||||
gas gauges.
|
||||
|
||||
config CHARGER_SBS
|
||||
tristate "SBS Compliant charger"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y to include support for SBS compilant battery chargers.
|
||||
|
||||
config BATTERY_BQ27XXX
|
||||
tristate "BQ27xxx battery driver"
|
||||
help
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@ obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
|
|||
obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
|
||||
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
|
||||
obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
|
||||
obj-$(CONFIG_CHARGER_SBS) += sbs-charger.o
|
||||
obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
|
||||
obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
|
||||
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
|
||||
|
|
|
|||
274
drivers/power/supply/sbs-charger.c
Normal file
274
drivers/power/supply/sbs-charger.c
Normal file
|
|
@ -0,0 +1,274 @@
|
|||
/*
|
||||
* Copyright (c) 2016, Prodys S.L.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This adds support for sbs-charger compilant chips as defined here:
|
||||
* http://sbs-forum.org/specs/sbc110.pdf
|
||||
*
|
||||
* Implemetation based on sbs-battery.c
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/power_supply.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/bitops.h>
|
||||
|
||||
#define SBS_CHARGER_REG_SPEC_INFO 0x11
|
||||
#define SBS_CHARGER_REG_STATUS 0x13
|
||||
#define SBS_CHARGER_REG_ALARM_WARNING 0x16
|
||||
|
||||
#define SBS_CHARGER_STATUS_CHARGE_INHIBITED BIT(1)
|
||||
#define SBS_CHARGER_STATUS_RES_COLD BIT(9)
|
||||
#define SBS_CHARGER_STATUS_RES_HOT BIT(10)
|
||||
#define SBS_CHARGER_STATUS_BATTERY_PRESENT BIT(14)
|
||||
#define SBS_CHARGER_STATUS_AC_PRESENT BIT(15)
|
||||
|
||||
#define SBS_CHARGER_POLL_TIME 500
|
||||
|
||||
struct sbs_info {
|
||||
struct i2c_client *client;
|
||||
struct power_supply *power_supply;
|
||||
struct regmap *regmap;
|
||||
struct delayed_work work;
|
||||
unsigned int last_state;
|
||||
};
|
||||
|
||||
static int sbs_get_property(struct power_supply *psy,
|
||||
enum power_supply_property psp,
|
||||
union power_supply_propval *val)
|
||||
{
|
||||
struct sbs_info *chip = power_supply_get_drvdata(psy);
|
||||
unsigned int reg;
|
||||
|
||||
reg = chip->last_state;
|
||||
|
||||
switch (psp) {
|
||||
case POWER_SUPPLY_PROP_PRESENT:
|
||||
val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT);
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_ONLINE:
|
||||
val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT);
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_STATUS:
|
||||
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
|
||||
if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT))
|
||||
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
||||
else if (reg & SBS_CHARGER_STATUS_AC_PRESENT &&
|
||||
!(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED))
|
||||
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
||||
else
|
||||
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
||||
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_HEALTH:
|
||||
if (reg & SBS_CHARGER_STATUS_RES_COLD)
|
||||
val->intval = POWER_SUPPLY_HEALTH_COLD;
|
||||
if (reg & SBS_CHARGER_STATUS_RES_HOT)
|
||||
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
||||
else
|
||||
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
||||
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sbs_check_state(struct sbs_info *chip)
|
||||
{
|
||||
unsigned int reg;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, ®);
|
||||
if (!ret && reg != chip->last_state) {
|
||||
chip->last_state = reg;
|
||||
power_supply_changed(chip->power_supply);
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sbs_delayed_work(struct work_struct *work)
|
||||
{
|
||||
struct sbs_info *chip = container_of(work, struct sbs_info, work.work);
|
||||
|
||||
sbs_check_state(chip);
|
||||
|
||||
schedule_delayed_work(&chip->work,
|
||||
msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
|
||||
}
|
||||
|
||||
static irqreturn_t sbs_irq_thread(int irq, void *data)
|
||||
{
|
||||
struct sbs_info *chip = data;
|
||||
int ret;
|
||||
|
||||
ret = sbs_check_state(chip);
|
||||
|
||||
return ret ? IRQ_HANDLED : IRQ_NONE;
|
||||
}
|
||||
|
||||
static enum power_supply_property sbs_properties[] = {
|
||||
POWER_SUPPLY_PROP_STATUS,
|
||||
POWER_SUPPLY_PROP_PRESENT,
|
||||
POWER_SUPPLY_PROP_ONLINE,
|
||||
POWER_SUPPLY_PROP_HEALTH,
|
||||
};
|
||||
|
||||
static bool sbs_readable_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
if (reg < SBS_CHARGER_REG_SPEC_INFO)
|
||||
return false;
|
||||
else
|
||||
return true;
|
||||
}
|
||||
|
||||
static bool sbs_volatile_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case SBS_CHARGER_REG_STATUS:
|
||||
return true;
|
||||
}
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
static const struct regmap_config sbs_regmap = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 16,
|
||||
.max_register = SBS_CHARGER_REG_ALARM_WARNING,
|
||||
.readable_reg = sbs_readable_reg,
|
||||
.volatile_reg = sbs_volatile_reg,
|
||||
.val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
|
||||
};
|
||||
|
||||
static const struct power_supply_desc sbs_desc = {
|
||||
.name = "sbs-charger",
|
||||
.type = POWER_SUPPLY_TYPE_MAINS,
|
||||
.properties = sbs_properties,
|
||||
.num_properties = ARRAY_SIZE(sbs_properties),
|
||||
.get_property = sbs_get_property,
|
||||
};
|
||||
|
||||
static int sbs_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct power_supply_config psy_cfg = {};
|
||||
struct sbs_info *chip;
|
||||
int ret, val;
|
||||
|
||||
chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
|
||||
chip->client = client;
|
||||
psy_cfg.of_node = client->dev.of_node;
|
||||
psy_cfg.drv_data = chip;
|
||||
|
||||
i2c_set_clientdata(client, chip);
|
||||
|
||||
chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
|
||||
if (IS_ERR(chip->regmap))
|
||||
return PTR_ERR(chip->regmap);
|
||||
|
||||
/*
|
||||
* Before we register, we need to make sure we can actually talk
|
||||
* to the battery.
|
||||
*/
|
||||
ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "Failed to get device status\n");
|
||||
return ret;
|
||||
}
|
||||
chip->last_state = val;
|
||||
|
||||
chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc,
|
||||
&psy_cfg);
|
||||
if (IS_ERR(chip->power_supply)) {
|
||||
dev_err(&client->dev, "Failed to register power supply\n");
|
||||
return PTR_ERR(chip->power_supply);
|
||||
}
|
||||
|
||||
/*
|
||||
* The sbs-charger spec doesn't impose the use of an interrupt. So in
|
||||
* the case it wasn't provided we use polling in order get the charger's
|
||||
* status.
|
||||
*/
|
||||
if (client->irq) {
|
||||
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
||||
NULL, sbs_irq_thread,
|
||||
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
||||
dev_name(&client->dev), chip);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "Failed to request irq, %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
} else {
|
||||
INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
|
||||
schedule_delayed_work(&chip->work,
|
||||
msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
|
||||
}
|
||||
|
||||
dev_info(&client->dev,
|
||||
"%s: smart charger device registered\n", client->name);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sbs_remove(struct i2c_client *client)
|
||||
{
|
||||
struct sbs_info *chip = i2c_get_clientdata(client);
|
||||
|
||||
cancel_delayed_work_sync(&chip->work);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id sbs_dt_ids[] = {
|
||||
{ .compatible = "sbs,sbs-charger" },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sbs_dt_ids);
|
||||
#endif
|
||||
|
||||
static const struct i2c_device_id sbs_id[] = {
|
||||
{ "sbs-charger", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, sbs_id);
|
||||
|
||||
static struct i2c_driver sbs_driver = {
|
||||
.probe = sbs_probe,
|
||||
.remove = sbs_remove,
|
||||
.id_table = sbs_id,
|
||||
.driver = {
|
||||
.name = "sbs-charger",
|
||||
.of_match_table = of_match_ptr(sbs_dt_ids),
|
||||
},
|
||||
};
|
||||
module_i2c_driver(sbs_driver);
|
||||
|
||||
MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
|
||||
MODULE_DESCRIPTION("SBS smart charger driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user