forked from luck/tmp_suning_uos_patched
Bluetooth: hci_intel: Add Intel baudrate configuration support
Implement the set_baudrate callback for hci_intel. - Controller requires a read Intel version command before updating its baudrate. - The operation consists in an async cmd since the controller does not respond at the same speed. - Wait 100ms to let the controller change its baudrate. - Clear RTS until we change our own UART speed Manage speed change in the setup function, we need to restore the oper speed once chip has booted on patched firmware. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit is contained in:
Loic Poulain
Marcel Holtmann
parent
e54991677e
commit
ff2895592f
|
|
@ -45,6 +45,38 @@ struct intel_data {
|
|||
unsigned long flags;
|
||||
};
|
||||
|
||||
static u8 intel_convert_speed(unsigned int speed)
|
||||
{
|
||||
switch (speed) {
|
||||
case 9600:
|
||||
return 0x00;
|
||||
case 19200:
|
||||
return 0x01;
|
||||
case 38400:
|
||||
return 0x02;
|
||||
case 57600:
|
||||
return 0x03;
|
||||
case 115200:
|
||||
return 0x04;
|
||||
case 230400:
|
||||
return 0x05;
|
||||
case 460800:
|
||||
return 0x06;
|
||||
case 921600:
|
||||
return 0x07;
|
||||
case 1843200:
|
||||
return 0x08;
|
||||
case 3250000:
|
||||
return 0x09;
|
||||
case 2000000:
|
||||
return 0x0a;
|
||||
case 3000000:
|
||||
return 0x0b;
|
||||
default:
|
||||
return 0xff;
|
||||
}
|
||||
}
|
||||
|
||||
static int intel_open(struct hci_uart *hu)
|
||||
{
|
||||
struct intel_data *intel;
|
||||
|
|
@ -111,6 +143,56 @@ static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
|
|||
return hci_recv_frame(hdev, skb);
|
||||
}
|
||||
|
||||
static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
|
||||
{
|
||||
struct intel_data *intel = hu->priv;
|
||||
struct hci_dev *hdev = hu->hdev;
|
||||
u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
|
||||
struct sk_buff *skb;
|
||||
|
||||
BT_INFO("%s: Change controller speed to %d", hdev->name, speed);
|
||||
|
||||
speed_cmd[3] = intel_convert_speed(speed);
|
||||
if (speed_cmd[3] == 0xff) {
|
||||
BT_ERR("%s: Unsupported speed", hdev->name);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Device will not accept speed change if Intel version has not been
|
||||
* previously requested.
|
||||
*/
|
||||
skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s: Reading Intel version information failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
return PTR_ERR(skb);
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
|
||||
if (!skb) {
|
||||
BT_ERR("%s: Failed to allocate memory for baudrate packet",
|
||||
hdev->name);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
memcpy(skb_put(skb, sizeof(speed_cmd)), speed_cmd, sizeof(speed_cmd));
|
||||
bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
|
||||
|
||||
hci_uart_set_flow_control(hu, true);
|
||||
|
||||
skb_queue_tail(&intel->txq, skb);
|
||||
hci_uart_tx_wakeup(hu);
|
||||
|
||||
/* wait 100ms to change baudrate on controller side */
|
||||
msleep(100);
|
||||
|
||||
hci_uart_set_baudrate(hu, speed);
|
||||
hci_uart_set_flow_control(hu, false);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int intel_setup(struct hci_uart *hu)
|
||||
{
|
||||
static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
|
||||
|
|
@ -126,6 +208,8 @@ static int intel_setup(struct hci_uart *hu)
|
|||
u32 frag_len;
|
||||
ktime_t calltime, delta, rettime;
|
||||
unsigned long long duration;
|
||||
unsigned int init_speed, oper_speed;
|
||||
int speed_change = 0;
|
||||
int err;
|
||||
|
||||
BT_DBG("%s", hdev->name);
|
||||
|
|
@ -134,6 +218,19 @@ static int intel_setup(struct hci_uart *hu)
|
|||
|
||||
calltime = ktime_get();
|
||||
|
||||
if (hu->init_speed)
|
||||
init_speed = hu->init_speed;
|
||||
else
|
||||
init_speed = hu->proto->init_speed;
|
||||
|
||||
if (hu->oper_speed)
|
||||
oper_speed = hu->oper_speed;
|
||||
else
|
||||
oper_speed = hu->proto->oper_speed;
|
||||
|
||||
if (oper_speed && init_speed && oper_speed != init_speed)
|
||||
speed_change = 1;
|
||||
|
||||
set_bit(STATE_BOOTLOADER, &intel->flags);
|
||||
|
||||
/* Read the Intel version information to determine if the device
|
||||
|
|
@ -416,6 +513,13 @@ static int intel_setup(struct hci_uart *hu)
|
|||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* We need to restore the default speed before Intel reset */
|
||||
if (speed_change) {
|
||||
err = intel_set_baudrate(hu, init_speed);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
|
||||
calltime = ktime_get();
|
||||
|
||||
set_bit(STATE_BOOTING, &intel->flags);
|
||||
|
|
@ -456,6 +560,19 @@ static int intel_setup(struct hci_uart *hu)
|
|||
|
||||
BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
|
||||
|
||||
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
|
||||
if (IS_ERR(skb))
|
||||
return PTR_ERR(skb);
|
||||
kfree_skb(skb);
|
||||
|
||||
if (speed_change) {
|
||||
err = intel_set_baudrate(hu, oper_speed);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
|
||||
BT_INFO("%s: Setup complete", hdev->name);
|
||||
|
||||
clear_bit(STATE_BOOTLOADER, &intel->flags);
|
||||
|
||||
return 0;
|
||||
|
|
@ -572,10 +689,12 @@ static const struct hci_uart_proto intel_proto = {
|
|||
.id = HCI_UART_INTEL,
|
||||
.name = "Intel",
|
||||
.init_speed = 115200,
|
||||
.oper_speed = 3000000,
|
||||
.open = intel_open,
|
||||
.close = intel_close,
|
||||
.flush = intel_flush,
|
||||
.setup = intel_setup,
|
||||
.set_baudrate = intel_set_baudrate,
|
||||
.recv = intel_recv,
|
||||
.enqueue = intel_enqueue,
|
||||
.dequeue = intel_dequeue,
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user